General Audio

Ok so I go to my favorite store locally and research what brands they have. I go in today with my list. I wanted 2 jl audio 10w1v3, hertz dieci 6.5" comps, Kenwood x998, all dash kits and that stuff. So they had a big sale this weekend and were out of 10w1v3's and dieci comps. So I end up buying two jl 10w0v3 and hertz energy esk 165.5. I got all my stuff with tax and head unit and dash kit and interface for my truck. $596 total Kenwood x998 $199 jl audio 10w0v3 $75x2 hertz energy esk 165.5 $150 stinger RCA cables Pac dodge interface $65

I need an install kit for a '99 Explorer and the harnesses for power and speakers also? Can anyone hook me up. I'm finding little on the net, and the ones I have found, I'm not fond of. Thanks!

since my radio broke, im using this combination.

I have 4 American Bass 15's dual 2 ohm. Which one should I buy today? They cost about the same.

I have a 15" AA SMD that's powered by a Stetsom 7k2e. I will gain down to 3500 - 4000 watts @ 1 ohm. Biggest enclosure I can fit in the trunk is 4.5 - 4.6^3 before displacement. The sub will take up .24 cubes and bracing .2 That leaves me w ~ 4.05^3 before port. I'll be using a 6" PSP Aeroport. A few questions I have are 1. Do you find port area in the straight length pipe, or at the very end (diameter of the mouth opening)? 2. My PSP has a 6" diameter straight pipe that flares out to 8" at the very end (on both sides). Which number do I use to find port area? 3. Do PSP's really require half the recommended port area as a slot or straight round port? If this is any h…

Well, I want to add a few things to my boy's Integra we bought for him. His grad is coming up and I figure it would make a nice gift. Head unit is taken care of. Front stage: Adire Audio Koda 8's + Image Dynamics CD1-Pro MH's. Adire Audio Koda 6.1 Image Dynamics CXS6 Alpine SPX-F17T Kicker 04SS56.2 Diamond Audio M661 or D661 Peerless, Davis, Audax, Vifa, or Morel 6.5" mid coupled with tweeter. Custom 3 way with an 8", 6.5" and tweet or 6.5", 4" and tweet. JL Audio XR653-CSi Amplification: JL Audio Arc Audio MTX Xtant Clarion Kicker JBL Old school Orion Cadence Next Clif And the noise makers: 1x or 2x JL 8W7 or 10W7 1x Crystal CMPX2 15" 2x ID IDMAX 10" Wait for new Tumult…

I am asking if a big car (ex: full size station wagon) or a small car (ex: 1990 vw golf 2-door) is better for bass? I am talking about the full bass spectrum 20hz-100hz. I always thought a bigger car was better because it takes about 8-10 feet for 20hz to fully produce, but it always seems a lot of people think a small car would be the loudest, so can you clarify this for me and others.

does anyone have experience building this type of box? well for the time being im gonna use one atlas and figured since i've allways wanted to try this box design heres my chance. this is what i have so far. max dimensions 14-h 37-w 20-d so around 4.7cf, ok now i was gonna make chamber A 14x26x20 so 3.2cf and chamber B 14x11x20 so 1.2cf. now using one 4inch port 15 inchs long chamber a would tune to roughly 25hz and chamber b would tune to roughly 43hz. so how would this do? i tried to stick as close as possible to the 1/3 rule. also tuning that low will i lose my upper end response, like in the 60+hz range?

My girlfriend has a 2010 Elantra and wants a basic system that'll sound good and have decent output. She really likes the look of DC subs and I already know DC makes good quality stuff. I'd like to get her a single Level 3 12 in a nice box made my Pound that Sound or Fisher Customs. The amp that caught y eye to power the Level 3 12 is a Kicker ZX750.1. Is that a good quality amp?

The sub MTX 9500d 12" dual 4ohm Box for the 12 (2cuft 36Hz 1" HDF w/ double-thick baffle) The amp JBL Powervalve BP1200.1 that I got for $200 from sounddomain.com. IT was supposed to be a scratched open-box item, but it was new when it got here.. woot The cable 0 gauge Audio Pipe w/ Stinger HPM and Custom Pro connectors

What amp would put out more watts.The saz 1000 or the audioque 1200 taking it that sundown puts out more than rated.Its on stock electrical

Dear SSA. Why am I getting Donkey Punch Vapor spam from you!!? Super unethical to harvest the e-mail database to spam out slightly offensive advertising for the new company you are starting -Jamie M.

what do you think about memphis 6x8 speakers? what do you think about jvc head units?

Short story, bought a new amp locally, it makes my subs murderlize my back window (SUV) About how much did you guys spend on deadening? I'm thinking of doing my front doors, the driver's and passenger's floors and the back hatch. I've never done this before so I don't know how much of anything I need and really don't wanna overkill. I will get some measurements this weekend but I'm just looking for input right now. Probably gonna use SDS unless somebody comes in with something cheaper that's butyl and effective.

I've searched, and all the topics i've found are for trunks, which you can bolt, or use velcro. My box will be taking up 2 of the 3 rear seats, and i can't bolt it, and i also don't think i can velcro without ruining the seats. I was thinking L brackets, but i need something more flexible than that to make it to the rear panel of the truck cab. Suggestions?

Hello I am again the forum and would like to know voltage Work sundown or evidence they have done with them As to who I worked with a call suono and is very similar but I want your opinions thanks

witch guy is right there is 2 dif opinions lookin for best one thanks http://www.s10forum.com/forum/f27/two-batteries-380297/

I am looking into the possible carrer of building speakers and audio equipment. Nick, Jake, Where did you guys go to school after high school to learn how to do all this audio greatness. I dont have a clue where to start looking. I think maybe electrical engineering, but maybe there is a specialty school or something. Let me know anything would be appreciated. Thanks, Steve

Hey I was wondering if anyone here had made a enclosure or kick panels with fiberglass and had luck with it. I don't really know where to start or what works and what dosen't. I want to build a box for a sub or maybe some kick panels because Im getting borded with just plain boxes and want to build something unique. What do I need to buy and where can I get the materials? Are there any web sites that would help me? What do you use to cover the fiberglass after you lay it? Is it just plain bondo? I have never used fiber glass before, but I know my way around a shop just want to expand my horizons. Any info would help a lot.

Okay, I have had this horrible smell for about 3 days. Didnt know what it was until i opened the good and seen my fuse smoking..... So I found my fuse holder smoking with the side that goes to the amp alll burned up and melted.... I dont know why at all.... It only started after my car had ran out of gas... Not sure how or why that would have an affect. but the odd thing too is my subs pound fine and my highs are still going. What can I do!?!? or check for? The only other thing I could even think was bad was a ground? Would that be a problem?

Im starting a car club in my hometown and i wanna know what you guys think of the names...be nice if you could reply to em and let me know Drop Boyz Drop Boiz Akoustik Koncepts SPLiens Dropz

The other day I was in the drive through at Wendy's and my mids and highs sounded odd so I turned the subs off and cranked the volume higher than I ever listen to my system to try and pin point it. After I got my food I turned the subs back on with the headunit still paused without turning it down Lawl...so I unpause it and KABLOOMBANGNASTYSHITBRIXLOUD....I scared the fuck out of myself and my girl wouldn't talk to me for a while lol...has anybody else had a shitbrix bass moment?

Ive been playing with my front stage for a little while and its just not cutting it for me.. let me give some info here, I have a 18" BTL running off a sundown 1500 @ 1 ohm, Damn speaker hits real hard (ported box). in a 97 Tahoe 4door. I dont know much about running a proper sounding front stage, i have deadened the 2 front doors and placed a pair of Zapco i-6 components in the front 2 doors. Powered by an older fosgate 600.4, using the supplied crossover (passive i believe?). I also have 2 eclipse coaxial's in the rear doors running off the same amp as the fronts. I have done the whole Velcro thing on the tweets moving them around to see what I like best.. they sound j…

my friend let me borrow is 08 avalanche for a couple days and i was of course blastin the music....i had the volume on the head unit all the way up bass all the way down and the volume on the ipod all the way up wit the EQ set to treble booster. i played put on and on the high note the lights dim to the point that they are almost off and last night all fo the electronics acutally reset while i was driving the truck when i was bangin. the guages all shut off radio went off lights went off...everything went off for about 2 seconds then came back on and it was playing fine again...but still dimming. also the subs sometimes just cut out and stop playing all together when i tu…

i guess should post here. i want something LOUD and i want a ported box. im not really concerened too much about sound quality as much as just solid pounding bass. i wanna run at least 1500-2000w rms to both of them. i aint cheap so let me know what some options may be...and if this is too vague tell me and ill try and elaborate more. i was going to go with 2 mtx 9512's...but for the price, they dont seem worth it to me...im sure theres better out there for much cheaper. lemme know...thanks