General Audio

Its been a hot minute since I've been back around the SSA Forums. So what I have to share is our new M3 lvl 6 15. http://youtu.be/LgINN67wNHs?list=UUCyrPB8lLWhPP-oWTfTP7hQ New proprietary 15in basket uses a newly tooled 10in spider. It can accomodate a full 4in peak to peak and comes in with a 28hz fs. Just what the low low tuned daily groundpounders need! In the video sub was on a 10k in a box built for 2 lol.

Anybody ever ordered anything from here before? Its a store on ebay. I'm about to order my Zx750.1 from here and I was hoping for a little feedback.

how many watts is hifonics amps over rated

First of all i wanna say sorry about all the post,i just wanna get opinions before i buy thats all.I have never heard hifonics but i have watched videos and it seems to do pretty good.would it be a good amp to run 2 ssa icon 12"inch woofers?the amp is the 2010d rated at 2000 watts, is that true 2000 watts that its putting out?

A friend of mine who is new to car audio unplugged his hifonics amp and didnt know to remove the connection to the battery when plugging it back up. He hooked the ground up first then he hooked up the power, it started arc welding inside and he removed it. I got over there and removed the fuse, hooked the wires up then when i put the fuse in, the fuse blew immediately. So i assumed he blew the power supply since the stereo wasn't on. He uses one of those devices to convert speaker outputs from stock headunit into rcas. So i put my amp in there and everything was fine. When i took my amp out, we decided to hook the amp up again.. if the fuse blew again... then we knew is w…

I was thinking of getting 2 SSA Zcon 18's.. im tring to keep a budget, so for now i was gonna run a Hifonics Brutus 2400.1 on each sub until i can afford better amps...The are supposedly CEA certified.. any thoughts???? Are they worth a crap?

I'm looking to get an alternator for my durango 03, i found a few sites, but I wanted to expand my options. One I liked was Mean Grean, If you know of any other brands and where to get em from that would be awesome. I'm gonna be powering a 15" MA audio hk15x2 @ 2000 watts rms lanzar amp. I need at least 250 amp alternator to 300. thanks in advance.

Hi everybody. I just installed my new high output alternator today hoping that it would stop my voltage from dropping like what would happen with the stock alternator. But it didn't. It sits at 14.1 volts where as the stock alternator sat at 14.4. I did all the big 3 upgrade wires in 0 awg wire as well. I am running a bzr1200.1d at 2 ohms with a 12" Type R D4. At 14.4 volts its supposed to push 900 wrms but the new 180amp alternator has the same voltage drop that the stock alternator had... Why isn't the new alternator keeping the voltage up?? Im not even pulling anywhere near 180 amps. Any input would be awesome.

I cant seem to find any website that has a High Output alternator that will fit a 97 Camry thats over 120 amps... is a 120 amp Alternator +Upgrading Big 3 to 0AWG +Main Battery = Kinetik HC2000 +Second Battery in trunk Kinetik HC 1400 will all that be enough power for a Fi Fully Loaded BTL 15"...just ordered the Dual 2 Ohm and im buying the Hifonics BRZ2100D Amplifier im gunna have it in a 3.85 cubic ft box

i have 97 gmc yukon and i was wondering if anyone know where to get a good high output alternator for under 300. i would like it to be 250 amps

I am looking at purchasing a set of high quality headphones without breaking the bank. I will be using them daily, directly connected to my iPhone 5. I want a set to have good tonal balance and smooth response. Requirements: 1. Tonally correct 2. Closed back to aid with outside noise rejection 3. Low impedance to help get a high output level 4. Smooth frequency response The German Maestro GMP 8.35 D looks like a good set at $250. Thoughts?

So looking into amps to power my speakers and tweeters but Im wondering if the high/low pass filters vs the frequency response of the amp actually affects the speakers and tweeters. Since the High pass is only 50-200Hz does this affect anything. Example Im looking into the 2010 Kicker zx350.4 Variable high-pass filter (50-200 Hz, 12 dB/octave) Variable low-pass filter (50-200 Hz, 12 dB/octave) Frequency response: 20-20000 Hz Speakers: MB Quart DKG 168 (DKG168 Tweeter: MB Quart PTK 40 (PTK40

just a thought what would you think would be the highest db set up with the lowest amperage draw. Basically the most efficient system with the highest db's I was wondering what was on the other side of the spectrum.

What's up all, Here's my situation that's kind of annoying. Randomly as Im driving listening to my system which consists of: Head.: Pioneer 7800MP Front: CDT HD-62/DRT26s/EX-560i F.Amp: Arc Audio 2100 CXL Subw.: Ascendant Audio 10" Assassin S.Amp: US Amps XT-800.2 My highs will just cutout. However, they'll come back on if I turn the volume up. The arc 2100 was bought used from ebay, and im thinking that's my culprit. Not too sure. What do you think?

So here is the scoop. 02 Silverado with older Pio Premier, H701, C701, Sundown 100.4, Sundown 1000D, big 3 with all 1/0 (pos to alt, neg to frame, neg to cab). Had some trouble with some tweets blowing (Link to that thread) and narrowed it down to the Sundown amp. Quote from previously linked thread below Had it sent to db-r they sent it back after they replaced some things. This is what db-r said... So I got it back and during the re-install I installed a Alpine W505, added a HU ground to metal in the truck. For the amp ground I ran a bolt through my cab with 1/0 on one side to the distro and 2 2gauge strands on the other side (had it so I used it). The 2 gauge str…

Alright I need your help again...but this time i did some research before so hopefully my questions shouldn't anger anyone. I have been doing some research on the history of car audio subwoofers and the progression of technological advances with wiring amplifiers and other stuff. But could someone please help me make a short version of it. I need to creat a section for my imc plan. Not quite sure what to include in it. lik i want to start with the first sub-woofer..how did it work....then explain the newest most advanced and compare the two. just want some insight before i start.

Im trying to learn more about hlcd's and I only know of two brand which is illusion audio ch 1 and the krypt audio one. The illusion audio is cheaper but I cant find a website to even purchase them. Can someone just do me a favor and just post some links to different brands of HLCD's?

just had to share this

i need a ho alternator for a integra but cant find one can anyone tell me were i can get one

Hey so im about to start my latest project now that i have the money to play with, i just wont be eating until my system is in which is ok, but i am lookin at 2 Btl 12s bout 1500w a peice, so im going to need an alt. right? problem is im having a hard time finding one to fit my car...if anyone can help...and i already have a yellowtop bat. should i get another?

reading the hoffman's iron law sticky, and have some questions. low end extension, high efficiency, or small enclosure size i know you have to chose two. and im looking at: low end and small enclosure how does the tuning and port area affect this? does it mean i need more port and a higher tuning? also assuming more power will be needed?

In my enclosure when the guy made it, they put a hole for the wires and just put the wires in a put a little tack to seal it up. How much of an effect would this have all together and should I take further precautions to fix this? When I was using the box it didn't sound bad personally, but thats completely subjective.

:ugh: :denim:

http://shop4.outpost.com/product/3241451?s...CH:MAIN_RSLT_PG someone order a pair of these, I would love 2 pair for my home needs

wow ok so i just checked this video out on youtube All i want to know is how the hell is that thing moving so much air. my fi bl would never be able to do that in my honda civic lol.