General Audio
An Open Forum Dedicated To all audio questions that do not fall under the other specific categories.
3,954 topics in this forum
-
i went to my local car audio shop today and they had a good deal on this beefy 15 inch sub. its a razor zsoft. the guy who owns the shop gets em built i've heard. anyways..the sub says its a 4ohm. what kind of amp do i need to get this thing seeing atleast 400 rms. if anyone can toss a link i'd appreciate it because im ready to order an amp right now. i have an ebay account so if you can find me something like autotek or hifonics on there i'd like that..those amps sound okay and dont cost alot.
-
0
Reputation Points
- 13 replies
- 916 views
-
-
For my setup (In My Sig.) which mids and highs are the best, crisp, and loudest between these three? MIDS Rockford Fosgate http://www.sonicelectronix.com/item_2481_R...nch+P1692S.html Kicker http://www.sonicelectronix.com/item_11504_Kicker+KS6930.html JL Audio http://www.sonicelectronix.com/item_1603_J...+TR690-TXi.html HIGHS (TWEETERS) Kicker http://www.sonicelectronix.com/item_11520_Kicker+08KS20.html Rockford Fosgate http://www.sonicelectronix.com/item_18209_...gate+P1T-S.html
-
0
Reputation Points
- 3 replies
- 755 views
-
-
A little fun with my new recones. Thier strapped at 2ohms and drink up everything I got. Good sign. :bigclap:
-
0
Reputation Points
- 5 replies
- 699 views
-
-
I have a Soundstream TRX 4.420,it puts out 70 watts rms x 4 channels @ 4 ohms, and 105 watts rms @2 ohms.------I have 2 sets of infinity's that run at 2 ohms,1 set of 6x9s rated at 105watts rms, and 1 set of 5 1/4 componets rated @ 75 watts rms. If I added 2 more sets and wired them together ass if it was 4 seperate dual voice coil subs in series each on there own channel would each speaker get 70 watts? or would each speaker get 35 watts? or would my amp burn up, even though it can run a 2 ohm load from running 8 speakers 2 for each channel? is this possible----------------Question #2 If this is a bad idea, and I probally will not do this anyway I was just wondering If t…
-
0
Reputation Points
- 5 replies
- 602 views
-
-
has anyone every ordered anything from this website? they have some pretty good deals and im just trying to make sure there a credible website before i make a purchase
-
0
Reputation Points
- 11 replies
- 1k views
-
-
So, I am getting ready to buy a box from a friend that is made for a 2008 F150 super crew (which is what i have)...however, the box is carpeted in a fuzzy gray carpeting and my interior is black. Is it ok to just rip the carpet off and recarpet it? Also, if I decided I didnt want to recarpet in black, is it ok to sand the parts of the box that you will see down some, apply some light layers of resin to harden it, sand it down and paint it? I have never done this, but I think it will give the nicest look. Thanks
-
0
Reputation Points
- 3 replies
- 2.1k views
-
-
Yes, i can get my player loose and everything, but it won't actually come out unless i take this stupid dash board brown thing out, and this is as far as i have gotten. Not sure if i was suppose to pull up the transmission trim, but whatever:
-
0
Reputation Points
- 4 replies
- 641 views
-
-
What does these mean on subs? FS RE QMS QES QTS SD RMS CMS MMS BL VAS XMAX XCOIL Please tell me what each of those mean if you can!!
-
0
Reputation Points
- 4 replies
- 595 views
-
-
i hope i dont sound like an idiot but i have 2 15" 150 watt 16 ohm subs, theyre like dj speakers, i want to use them in my car, what amp is right for these and how would i wire it? im terrible when it comes to figuring out ohms and ive never heard of 16 ohm subs till my friend gave me these
-
0
Reputation Points
- 16 replies
- 1.6k views
-
-
I searched a couple of weeks back for a converter that would allow me to put 6.5 inch midbass drivers in the doors of a tahoe and was able to find it. Now I am ready to purchase them, and I can't find them anywhere. I found them on ebay, but after hours of searching I can not find it. The speakers in the door are built into a plastic type converter so they can fit into the hole. I just need aftermarket ones so that I can install a standard 6.5 inch speaker into the door without any modification to the door itself. Thank you.
-
0
Reputation Points
- 10 replies
- 840 views
-
-
Ok!! you guys have had them long enough So tell us what you think. likes and dislikes
-
0
Reputation Points
- 5 replies
- 1.3k views
-
-
I currently have two RF P3 12s, a Hifonics 1208D amp, a 1 farad stinger cap. and 4awg wire all around. yet my electrical is VERY noticably weak, headlights dimming a TON and just overall weak flow rate. im looking at a new battery, like the http://www.soundsolutionsaudio.com/zencart...products_id=101 should i replace my factory battery, put it in line with what i have now, or replace it with where my cap. is? i plan on getting a new, more powerful setup this summer, so there will be even more power needed. any suggestions? if you need any more information, just ask. i konw i missed something thanks a ton!
-
0
Reputation Points
- 16 replies
- 1.5k views
-
-
I have a friend with the truck above, he wants to keep the factory h/u and look. My 1st thought was a Rockford Fosgate 3Sixty.1 to handle that duty, buts it kind of an expensive route to take unless I pick it up off ebay or a similar place. Sub wise we're going with the Soundsplinter RL-i 8 either dual 4 or single 4, dependent on amp choice he makes. Planning on ported, but what size box/port area/vent size do you recommend?? Amplifier choices so far are as follows, JBL GTO 601.1, Alpine MRP-M500, Alpine PDX-1.600, Kicker ZX500.1, Rockford Fosgate R500-1, and any others you can recommend, any suggestions on anything I've stated so far would greatly be appreciated. Subwoof…
-
0
Reputation Points
- 6 replies
- 885 views
-
-
I just have a general question about current draw. I am seriously concidering jumping on the 2000d presale and was wondering if it puts out 300 amps max current draw at 1 ohm, what will the nominal and max draw be at 2 ohms. Is there a mathmatical formula I can plug numbers in? I plan on running 2 2000d's at 2 ohms each since i have 2 dual 4 12's. Thanks guys, I still love this forum.
-
0
Reputation Points
- 8 replies
- 809 views
-
-
I was refered to the board from the mwsr msg. board hope some one can help me out heres the deal puttin the touch screen in the lincoln, got the parking break wire grounded and the vidio is working fine...BUT i aint gettin any sound when the car is started, but I do when it is on acc. keep following me though.... there is a red (it is hot) wire that was grounded to the back of the fac. radio and if I ground and then release this wire while the car is on I get my sound back..... aint never mesed with somthin like this....DO I NEED TO GROUND THIS WIRE?? IF SO WHERE...TO THE BACK OF MY DVD PLAYER...TO THE FRAME??? IM LOST ANY INFO WOULD BE GREAT...ALSO ANY BODY KNOW WHERE I…
-
0
Reputation Points
- 3 replies
- 570 views
-
-
Hey, I'm looking for a bit of advice. I bought some 6.5" Focal component speakers for my 99 Civic LX which has 6.5" stock speakers. The problem is that the Focals appear to be a hair larger than they specified... The diameter of the speaker is a good 1-2mm wider than claimed, which means I'm forced to do some modification. I would probably just huck them on eBay, except a) I really like their sound, and b) I already drilled / installed the tweeters on my door panel. So I'm left with a tricky situation. I'm debating whether or not I should be cutting the metal ring around the speaker, or the plastic on my door. They both have pros and cons and while I'm slightly handy, I'm…
-
0
Reputation Points
- 12 replies
- 1.3k views
-
-
I'm going to be in the market for a new sub soon, I have a 18" bl rite now, but it is time for a change. I have a sundown saz 1500d, and pioneer avhp5000dvd. Im about to buy some kinetic 1800s and anew front stage. It is all in a 2000 GMC Jimmy..... But ihave narrowed it down to 4 subs. NS 18, rl-P 18, XCON 18, or a BTL 18 . I want a decent ground pounder. Since I only have about 1500 watts that sorta cancels out the BTL.I wasn't really wanting another Fi that much anyway because since I got mine it seems like everyone around here has one and I like to be DIFFERENT...... It will be in 7-10 cubes @ 28-32hz …
-
0
Reputation Points
- 12 replies
- 1k views
-
-
If there was one thing the internet could offer you car audio enthusiasts that it doesn't already , or think something could be greatly improved, what would that be? I'm talking store selections, information guides, specs for cars, anything. Kevin
-
0
Reputation Points
- 27 replies
- 2.9k views
-
-
I gave a friend of mine a demo of the 15's at a local show today. I had to give her earmuffs before she would consider the demo. lol
-
0
Reputation Points
- 11 replies
- 1k views
-
-
didnt know where to put this but... looking for an alarm system and i landed on the viper 7900 and viper 5901. which would you suggest and why?? thanks
-
0
Reputation Points
- 7 replies
- 754 views
-
-
My Fi BL came today already, it tooke way less than a wek and a half, i live in iowa btw. 44 lbs though lmao.
-
0
Reputation Points
- 2 replies
- 617 views
-
-
http://img5.imageshack.us/img5/4880/img00080v.jpg 2nd day after i finished installing. note: my music was off at the time, and we both were at fault. I made an illegal left turn and he made an illegal uturn, causing the crash. No tickets were issued. But hey, there's a $500 deductible.
-
0
Reputation Points
- 5 replies
- 850 views
-
-
which sub would be a kick ass daily driver?
-
0
Reputation Points
- 6 replies
- 803 views
-
-
Hi everyone. I'm getting ready to start my build on my 1993 Thunderbird. I've become tired of big subs and big SPL, so I'm shooting for more of a sound quality focus. This will be my first stab at active, but I have decided to go 3-way with it. Go big or go home. I do have quite a bit of experience installing and I do consider myself generally knowledgeable. Now on to what we're working with. The vehicle is a 1993 Ford Thunderbird Supercoupe. All processing will be done up front with a Pioneer Premier 880. The midrange and tweeter will be powered by a Sundown Audio SAX50.4. The midbass will receive it's power from a Sundown Audio SAX100.2. I tend to listen to a …
-
0
Reputation Points
- 85 replies
- 6.6k views
-
-
For meh trunkkkk Its average size, I wanna do 1 layer 50sqft, 100sqft?
-
0
Reputation Points
- 7 replies
- 615 views
-
Who's Online (See full list)
- There are no registered users currently online