SPL & SQ / Fabrication

I have modeled up a box for a 12" Fi.SSD Now I'd just some of you box builders to just verify what I've done. And let me know if its good or not Here is a pic since they're worth 1000 words: Port and Sub displacement has been accounted for. Where would be the best location on the port side to place the sub? I dont quite understand port loading and such. Thanks in advance

Tomorrow is 21 days from my order date for the subs. I am trying to get everything ready as I am hoping the subs will ship soon. Thanks for the help The list: Vehicle : 1999 Chevy Tahoe (4 door) Location in the vehicle: Cargo area Space available (Length x Width x Height): 30" x 48" x 21 " Subwoofer make and model: SSA DCON 12 (x3) Subwoofer Size: 12" Number of Subwoofers: 3 Type of Port (Kerfed, Slot, Aero, etc.): slot What type of music do you like?: all kinds (rap,dubstep,country,rock) Is your goal SPL or Everyday Music?: everyday Tuning Freq (Hz): …

looking to do a wall with 4 AQ HDc3 15's and 2 IA 40.1's and need some plans drawn up for a 88 civic hb for bass race and db drags. If there's someone on here or if you have some contact info for some one please post it up as i would like to disscuss dimentions and price of the plans. Thanks mel P.S. I won't be on here again until mon.

Well, I thought this guy was going to help me out with coming up with the specs to build a box, but he barely replies to my emails. So now I am trying to figure out the specs for a box. I would rather build it due to cost, and have looked at the box builders further down on the site, but they are a little expensive. It will be for an 18" Fi btl, as I'm sure many other people have already asked for help on this. I don't have a limitation really for room for the recommended sizes because I have an SUV. Width about 41" from side to side, and I'll have to go measure the height and depth. I listen to rap. I'd rather have it be sub up, port back, but not a side port unless it…

i've been at this for awhile trying to get a design for 2 15'' lvl 3's.. i wanna go subs up port back in my tahoe. any help would be appreciated.

ANYONE know who can or knows ppl who can please i am desperate

What do you guys use to make those box blueprints?

Hey everyone. I am not sure what the policies are with box designs are here so i thought i would ask. If I asked for a design on the forum and someone does give me one do i pay them or what?? this is just a picture of the box. Like the dimensions of the pieces of wood. I could make the box but i have no clue on how to design a port or tune a box. If this was not clear or difficult to understand than let me know or just delete it , hha Thanks, Matt Cusack

Does any one know how i would calculate port height width length 1 n 2

I discovered this on a Honda forum that someone had posted, the description of the box are in the web browsers little tag (this is how it is using firefox). They range from 1-2 subs, and 2 cf all the way to 4/5 cf. The tuning is a little high on a few of them from 35-37 hz, but theres some lower. I think this may help a few out, Sub Box Diagrams

So after using the Torres' box calculator I have come up with these panel sizes Sub diameter: 14.125” Top: 33 x 16 Bottom: 33 x 16 Sides: 15 x 14.5 Front: 33 x 15 (double baffle) = .21cubes disp Back: 33 x 15 ________________ According to the calculator I am left with 3.55 cubes for a sealed enclosure... Does that sound right? The lumberyard near me said they could make the cuts for me.... Any quick and calculated responses are much needed... Thanks -Danny

Been awhile since Ive been on here but I Just purchased back my 2x 15" SSA Icon subs I first purchased around 11 years ago. I have/ had them in a 7.2 cubic foot box net tuned to 32 and it sounded great on the bass music and rap/ hip hop I used to listen to but not amazingly accurate/ punchy on rock, etc. Im looking to only use one of them in my 2010 Ram 1500. I currently have a 10" JL W7 in a sealed box in the truck and it sounds great and I love it but doesn't quite have the output Id like and planning to put 1 of the Icons in the truck. Im considering either Ported or sealed. I now listen to mainly bands like chainsmokers, club music, alt rock, heavy…

i want to make the box fit in my 2000 honda accord and made the measurements on the bigest box i could make 34 inches long 21 inches deep and 16.5 inches high (might be able to go higher) will this be big enough? and how big should the port be to tune it to 32 hertz?

This is my first box design and I just wanted someone to check over it and make sure it's accurate. It's for a hdc3 18 on a bxi2010 in a 96 Blazer. The box specs are 37.5w, 21.5h, 21.5d, port width is 6", port length is 6", 6 cubes tuned at 36hz.. Thanks.

I've had this sub for about a year and I want to build a new box for it. The first time, I built the port a little small (port area wise), so this time I'm going to make it bigger as well as increase the box volume. My plan is to make a box that is 32" wide, 22" tall, and 28" deep with a port that will be 20.5" tall, 6" wide and 35.6" deep. According to bassbox pro, that will give me a 29hz tuning. Does this sound right? Those are the maximum dimensions I can fit in the back of my Jeep while still keeping the port about 5-6" away from the hatch. Any suggestions? BTW, it'll be sub up, port back and it's powered off of a sundown SAZ-1000d. Also, do you think I'll need a…

This is my first box im going to build, and its going into a 95 honda accord. I may increase the height to 17 or 18 if i can fit it. I talk to guy at my local audio shop and they would charge me $250 to build it and he told me not to use a areo/tube port that is was 90's tech and nobody uses it now and slot was the way to go. I wanna use a tube port to save space. What are you guys thoughts on this box

Doing a system for a friend with an Intrepid. He already has the subs and amp- 2 12" T2's in D4 config, and a rockford T2000 to power them. Lots of room in the trunk to play around with so this is what i was thinking: 5 cubes gross, single slot port appox 96 sq inch tuned to 35hz. Subs and Ports firing rear. Goal is primarily SPL and as long as it doesn't sound like complete ass he's cool with whatever. Listens mostly to rap. What do you guys think?

ok guys, its time to get some plans going for this box. im using 2 12" ssa zcons and pushing them with a audiopipe 3k (ONLY UNTIL I CAN AFFORD A BIGGER 4K+ AMP) so its not my perminant amp here fellas. i took my max dimensions tonight and used a box calculator and i have 6.81 cubes to work with. as for tuning, im not really sure. i like my lowwss (30hz or so) but i want to be able to throw up decent numbers. i was thinking 34-35hz maybe?? not really sure. thats why im here asking you guys for help on this so i dont waist my money.

can anyone please help me design a box max dim 44x22x22 going to be in the trunk of a 1997 towncar

im building my third box but first wall and i always wonderd if when i calculate the cubic feet of the box do i subtract the port cubic feet??? i have come up with a box thats 17.5cf but the port is 2.4cf and each woofer is .25cf so its like 14.6cf .please some one correct me if im wrong im not to sure

Hey guys i came up with a design i just want to know if i did this right let me know its 4.4 cubes not counting port area and its 40 hz can somebody double check this and confirm what i did was right thanks

hi, i have two 12's i made out of wmd motors (the tripple stacked ones) and mostly sig soft parts. like i said i have two of them and two 1500 watt rockford amps. this is going into my durango. i would like to hit high numbers with these. i have tons of room back there and a 2400 bat. i just need help designing a box. thank you all in advance!! eddie g

Heres me covered in sawdust Routing More routing O Bracing Triple top facia!

I have a 2002 Silverado 1500HD crew cab that I am wanting to put 2 xl 12s in. I will actually be underpowering them a little with about 1300 watts a piece when wired together to .5 ohms. I am not wanting a blow through I just want a box that may not take up too much room so I can have at least one person ride in the back. What volume would the box need to be? And how much port area?

I just had a box built for my 2 icon 12's tuned at 30hz.I had it metered at my local shop.they said it was peaking at 40hz.is this normal?is it cabin gain etc.