SPL & SQ / Fabrication

Which is better for making the outer part of the kick panels, grill cloth or fleece? I used grill cloth for my tweeter pods. It seemed to work great. I also read that others use fleece.

I am putting together a box for a single 12" xcon. It will net 2.7 ft^3 and be tuned to 30hz. My question is: how much difference will lining the inside of the box with resin make? Is it worth the extra time and money? This is a daily setup, I do not compete. Will my ears b able to tell the difference?

Hey guys, I am asking for as much input here as I can get. I have everything I need...it's sunny outside..but I am at a hault. OK, I take it back... my HO alt from Iraggi was attempt delivery so i cant pick it up till tomorrow, my 4 AP30001D's should be here any day, my 50 foot spool of 0 gauge, a 40 pack of 0 gauge terminal rings...and Kicker should be shipping back two 4 channels soon as well. Otherwise, i have the van, I have the subs, I have the 3rd 4 channel, 3 AGM batteries..same as Deka Intimidator..I got lots of wood... 2"x6"x8' boards for bracing... gonna make X's inside of squares..should be solid. I have several sheets of 4'x8'x3/4" MDF... I have 4 Extremis 6.…

Anyone done a fiberglass build in a mazda 6 sedan? I have this idea of putting my 15" ssd in the center, behind the seats, with two 6" aeroports (one on each side of the sub). This would be firing into the cabin. I have my rear seats down 90% of the time, so I would imagine it would sound great. Anyone done it, or know how? I am looking for someone to take on this project for me, as I have never done it, and wouldnt quite say I have the time to do it either.. Anywho, im in Keller Tx and if anyone is interested I am willing to pay. Im looking to stay in the 3.5-4 cu ft. range, tuned at 33-35 hz. Im rocking a 08 mazda 6 sedan (not the cool hatch model). If you need anymore…

Planing on tuning it to almost 42 hz. This will be a competition box for my 04 jeep liberty. Subs up port back left. My question is what type of sq foot should i use for this box. Alpine's site says use around 2.5^2 per sub in a ported enclosure. Also if it matters im planning on running these off of a Sundown SAZ 2500d

hi, i am new to the whole db drag thing? if thats even what it is called. how does these competitions work? i would imagine who ever had the most money would win... i mean its not like you can run and make your system louder or anything so since it is all just bought how is there a rightful winner if people just drop thousands and thousands of dollars? sorry it might sound stupid but i really dont understand.. vocab might help me too! thanks

Alright I'm looking for advice on a sub box design for an Sa-12 that will give as much SPL as possible - without sounding terribly peaky. I'm willing to compromise on Spl for a frequency curve that would be acceptable for normal music listening- hip hop, rock, and country. sub is on JX 1000/1 - if you have questions about my vehicle and setup - look on my profile first under "About Me" and then ask me if the info you want is not there. Member Quentin Jarrell said "I would build the enclosure 1.75 cubic feet net tuned to 32 hertz. This will give you a 3db ripple (boost) at 35 herts and give you a F3 (-3db) at 26 hertz. This will give you the sense of exaggerated bass …

Ok, so now I'm hooked. I have the 2 12" zcon's in and the 2500d. Now I want more. Have an eye on a ns-1. What will I need to do for a competition box? Keep in mind that I do have a s-10 extended cab 3 door and it is a daily driver that I want to make into a competition truck. Current box is supposedly 4.75^3 at 36hz? I think the hz is correct. Have to double check. It was designed by ram-designs. It's a angled back or trapezoid style box. Top is 14x43, bottom is 20x43 and it is 18 tall. I come uP with 5.4^3 after sub displacement. What do I need to do? What is the difference in a comp box vs a ported box?

What teams do you belong to? What does being on a team mean to you? What do you do to help out your team and what does the team do to help you out? Does your team go out of its way to help others and/or the industry?

Anyone know if there are any major/non major SPL competitions in NJ area. I would like to go up and watch and maybe participate in the future. But mostly just watch in awe. Curt

Hey everyone! I'm looking to replace my current set-up with something new. My amp just died today on the way home from work and so I'm in the need of a replacement. Currently I have a set of RS65.2's up front only, after pulling out the rear deck speakers. Having only a front sound stage is new to me but, after running it a few weeks, I got used to it and really enjoy it. What I'm looking for is either a new amp to power the existing set I already have (not sure how much life is left in them) or get a new amp and a set of components to match. Budget is ~500 but I wouldn't mind going a little more if I could get a nice eq in there to really dial in the system. If you need …

I am running 2 18s walled off in my 2002 grand prix. Before I took the 18s out I was doing a 157. I am looking for a component set(I believe stock size is 5.25) so that I can hear my mids and highs over my subs. I am aiming for slightly louder next year as well. Going to try to break that 60 mark. I am not looking to do much fabrication wise so I would like to stick with stock size. I will make a cutout for a super tweeter if that is something someone recommends. I have looked and hunted around a ton, but can't really figure out where to start and what to look for. Any help would be appreciated.

Tought to explain, but here it goes. I plan on using an 18" sub in my car. Due to size restraints it will be firing up into the lid of the trunk. Now, has anyone tried to make a baffle to go on top of the sub? The baffle would be touching the box at the back of the trunk and be touching the very top of the trunk at the front of the trunk. The baffle would span the entire length of the trunk. The sub would then fire into the baffle and create compression loading like in a hatchback. Damn, that is tough to understand. If anyone knows what I am talking about and has a better explanation than please feel free to elaborate. I just drew it up quick. I am just wondering if the …

Hey I am just wanting to clarify that this box design meets the specs that I was told. This is for "1" 15" Fi BTL. It was designed to have 4 cuft. tuned to 35Hz. (Calculations done by BKOLFO4) The box with a slot port will need to be 17" tall in front, 14" tall in the rear, 31" wide, and 23" deep. The slot port will be 12.5" x 4". You will run it into the box until it is 4" from the back wall, and then turn and go 2" parallel to the back wall. (Designed by BKOLFO4) Like this (note the port dimensions are internal dimensions): Thanks in advance, Curt

I have my 3/4 thick mdf cut. Took me about 3 hours just to cut it. The only thing im confused about is putting 2 pieces of wood together. Would i have to apply wood glue to the 2 pieces, attach them together, and wait till it dries, then predrill, then screw? Im really confused. This is my first box. I dont want the edges to crack.

dBDRAG Winners -------------- Street A -------- 1. 150.7 Jay Odom 150.3 150.3 149.8 150.7 2. 150.2 Ryan Ferguson 150.1 150.1 150.2 3. 143.8 Casey Sullivan 143.4 143.8 4. 142.5 Henry Montgomery 141.6 142.5 5. 149.6 Jonathan Smith 149.6 6. 148.1 Greg Mccool 148.1

I want to put 3 batterys in the back end of the car. I have a lot of 1/0 wire. Which is better/correct?

First off, hi...i just joined... I'm a complete audio noob... I'm looking to build a console/sub box for my 2007 Silverado... Its a reg cab with hardly any space behind the seats...so i want to take out my jump seat and build something... Here are the plans i sketched up... I basically want it to extend all the way to the dash... have a cup holder... and have the sub in the back, out of sight.... I will put a arm pad on top to rest my elbow... I'm not trying to beat this box out the frame or have a super loud setup.... I'm looking for looks/functionality/and bass to complete my setup...... Any criticism is appreciated....any thoughts or ideas let me know..... I don't k…

Would it be a good idea to cool your coils down to less than 0*C before your SPL run. One of the ways i have thought about would be to spraythe duster cans upside down int the pole vent. Only problem i can think of is if you got alot on the spider. Lower temperature means lower resistance which means more power.

hey whats up im looking for some copper buss bars to be made or ordered or even shown how to make em, i need each of them to have 4 3/8 holes in them i need 4 of these i would like to run 4 runs of pos & 4 neg from front to back battery

Since my local box builder seems to think he needs $270 to build my sub box I decided to tackle it myself. I have been reading up on box building when I came across a forum that suggested making a box panel that sandwiched a layer of cork inbetween 2 layers of mdf. Another suggestion was to use sand inbetween 2 layers. As the latter isn't feasible, I am interested in the cork option since it is fairly cheep. I understand that the cork is supposed to help dampen the box. Has anyone utilized this practice? Or are they blowing smoke? They also suggested using dynamat instead of cork, but that seems a bit pricey.

So I get through most of the sketch up of a new box and it hits me... My port is 6" wide and where it ends is 6.75" away from the wall of the enclosure. Even though it is more space than the total width of the port, I assume it is close enough that it will effectively create another bend in the port and add more length than I want? It's late, I'm tired, and I think I just wasted the last hour. fml I am curious, at what point does the port end and the perpendicular wall change port length? How close, or far do they need to be?

Iv been doing some research in advance of me competing next year. Although I will be doing a ton of testing on the termlab once I start building my setup, I wanted to get a starting point as it will obviously make things a bit easier. Basically my main question is going to be if anyone has actually tested the correlation between vent mach and spl readings. Iv been reading that best results come out of about a 0.05% vent mach in a build, but on the other hand you see high powered, high sd setups only using 8" aeroports that are putting up huge numbers. I may be over-thinking this, I'm just trying to grasp as many concepts as possible before I start testing so that I ca…

I have a 97 accord sedan, I running a alpine hu I have 3 JBl BP series amps. the 80.4 for my highs and Im running the BP 1200.1 per sub. As for Subs, I have the MKII 12's Brahma's (2) in a 1.75 cubic feet box I think tuned an 30hz. I don't think it hits hard enough I haven't had it tested yet. Im looking for some suggestions for a new setup to get a deeper and harder bang. Could someone help with some ideas, even if I have to use the whole trunk im fine with it

i'm thinking about making a box for my trans am to these specs, but i dont know if its going to be big enough for my rl-p's. i know it should be simple, but i've tried for hours and can't figure this out for myself. could someone please tell me how many cubic feet per side i'm going to get out of this box if i build it? i would REALLY appreciate it. http://thirdgen.org/techbb2/showthread.php...threadid=306257