SPL & SQ / Fabrication

What is the most accurate sub box calculator tuning and everything

I need help with an enclosure I'm building my enclosure is 2.51 cuft after displacement it will hold one fi Bl 12 ran off a T1000 amp I would like to tune it to 32 HRZ with what info I have come up with in order to tune it to 32 HRZ if I go with a 4"port 10.3" long it should be around 32HRz does this sound right my enclosure is 16" deep 54" long 9.5" tall in the front and 7.25" tall in the back it will be up fire and I would like to run the port off the front witch is the side that is 9.5" I'm working with very little room so I can not change the die mentions of the enclosure much if you have any suggestions on how to do this right please let me no add if …

Since my local box builder seems to think he needs $270 to build my sub box I decided to tackle it myself. I have been reading up on box building when I came across a forum that suggested making a box panel that sandwiched a layer of cork inbetween 2 layers of mdf. Another suggestion was to use sand inbetween 2 layers. As the latter isn't feasible, I am interested in the cork option since it is fairly cheep. I understand that the cork is supposed to help dampen the box. Has anyone utilized this practice? Or are they blowing smoke? They also suggested using dynamat instead of cork, but that seems a bit pricey.

This is a box I am building for a friend. For an 8" Kicker L5, There is very minimal space in his Jeep TJ, so the height is pretty much no give for the size of the sub, even though it is an 8". This is the first box I have ever built before, so I know it may seem a bit rough in some parts, but I am working on it to make it look good for my buddy. If you guys have any comments about it to make it better, please let me know! after all i am only a beginner! Thanks! 0408001333.jpg picture by jaketrials - Photobucket 0409001306.jpg picture by jaketrials - Photobucket 0409001306a.jpg picture by jaketrials - Photobucket 0409001306b.jpg picture by jaketrials - Photobucket

First qustion i no its pretty noob but to attach mdf together i predrill then add wood glue and screw in the predrilled holes correct. also i am trying to make my corners rounded where two piece of mdf are meeting also i got a ring so the sub would mount to and then i am going to attach it to the box so it will be flushed mounted do i do them as predrilling etc or do i need bracing heres a link to my build log so you can kinda see what i am working with My Nissan frontier build sorry about grammar and spelling been a long few days of fiberglassing

HI everyone. I come with another question. I know there are probably many variables but I was wondering if there is a general guideline as to when bracing is required for a sub box. Lets say for instance my sub is a 12 that requires a sealed 1 ft.cu. box with 1 inch mdf. It will be fed 1500 watts rms. Would I need to brace this box? does it make a difference if the box is sealed or ported? Thanks!

Ok so I am going to build my 3rd sub box and i want to know how to cut the bracings and that stuff. And how to port/tune you box. I am going to put it in a car and i want the sub facing upward and the port too. I do not want an L ported i want like square type one. My sub is a 12 Fi SSD. I want it to use half of the trunk but not be so tall just like an inch after the sub fits. But mainly i just want to learn how to do square ports. Any help plz.

Hey guys, I am asking for as much input here as I can get. I have everything I need...it's sunny outside..but I am at a hault. OK, I take it back... my HO alt from Iraggi was attempt delivery so i cant pick it up till tomorrow, my 4 AP30001D's should be here any day, my 50 foot spool of 0 gauge, a 40 pack of 0 gauge terminal rings...and Kicker should be shipping back two 4 channels soon as well. Otherwise, i have the van, I have the subs, I have the 3rd 4 channel, 3 AGM batteries..same as Deka Intimidator..I got lots of wood... 2"x6"x8' boards for bracing... gonna make X's inside of squares..should be solid. I have several sheets of 4'x8'x3/4" MDF... I have 4 Extremis 6.…

So I ordered a BTL 18 today, and I think I'm going to base my enclosure off the one for the XCON optimal one thats here on the site. It says that box is tuned for 30 hz. Fi recommends tuning to 32 hz for the BTL. I don't really figure that the 2 hz will make that much of a difference, but I could be wrong. What I'm planning on doing is putting the port on the other side of the box, so that the driver would be facing up towards the roof of the vehicle, and the port would be facing forwards, toward the front of the vehicle. My question is will putting the port on the wider side of the box, (25.25 in. vs 22 in.) put me closer or farther away from the 32 hz? Also, I'm plannin…

Any advice on doing an external port, like how to attach it and are there any negatives to doing this? Im planning on getting 2 sa-8's and putting them under the back seat of my 03 extended cab 1500. I will have the port coming out the side of the box under the seat as well. I plan on making it so I can remove the port to exchange with others, really just to see the difference and also because of size restictions. Box will be 2 cubes after sub displacement, so I will probably do a 5"x6" port 32.5 inches long for 33hz tuning and another one fro 38 or 40 hz. Thanks for any input guys.

Internal dimensions: 15" d 34" w 10" h Port: 10" h 3" w 30" l Sub displacement .1 cuft Subs up, port sideways 2.1cuft after sub and port displacement Leaving .1 for 45s, so 2 cubes net Tuning guesstimate: 33-34 Hz Side note: I would like to figure out how to calculate neccesary port area by the parameters of the sub, not by the 12-16 square inches per cuft rule, might use areos if someone has a suggestion.

Ok I'm a newb so this is prob dumb question but I want to make a costome headunit adaptor plate and I have abs, so I was wondering how to put togethor the two pieces

Which is better for box building liquid nail or wood glue? Any others you would suggest?? Thanks, Matt Cusack

I'm well aware of the complexity (or so it might seem for some) involved in creating a ported enclosure built to specs. I'm also aware of situations where different subs have been dropped right in to a ported box previously housing another sub and working well. With that being the case I was wondering how bad a prefab box like this one I stumbled across on ebay could possibly be. I'm absolutely prepaired to pay for a properly made custom box but was just curious a) if anyones had any experience and b) if this is just a COMPLETELY bad idea. Heres the link to a prefab 4 cu ft ported box tuned to 32 hz (almost exactly what I'd be getting custom made): 15" CUSTOM-PORTED MDF S…

I just got done applying SPL tiles to the outer shell and inner frame of the door. The door itself sounds a lot better but now i would like to prevent the door from flexing within reason. I have the idea of rolling the window all the way down so i can then make a form with cardboard in between the window and the outer shell of the door, then just fill it in with expanding foam. I'll do probably about 80% of the outer shell so it doesn't interfere with anything on the far ends of the door such as wiring or door locks, etc... As far as i know, besides that, i just gotta make sure i do not block the drain holes on the bottom of the door and i should be good, right? i've neve…

First off, hi...i just joined... I'm a complete audio noob... I'm looking to build a console/sub box for my 2007 Silverado... Its a reg cab with hardly any space behind the seats...so i want to take out my jump seat and build something... Here are the plans i sketched up... I basically want it to extend all the way to the dash... have a cup holder... and have the sub in the back, out of sight.... I will put a arm pad on top to rest my elbow... I'm not trying to beat this box out the frame or have a super loud setup.... I'm looking for looks/functionality/and bass to complete my setup...... Any criticism is appreciated....any thoughts or ideas let me know..... I don't k…

First post, Please bare with me. I did a search but didn't find what I was looking for. 2005 Ram 1500 Quad Cab My truck is all set-up with highs, deck, EQ, Kicker ZX.1000 amp (~1150W @ 2ohms). Looking to run a 12" BL Dual 1Ohm. I listen to mostly rap and hard rock, looking for a good box for the daily driver, I'd say mostly rap, real deep lows but I'd still like to hear the kick drums. I've never built a custom box before; I'm looking at 2.0 ft3 slot ported box @ 32hz. Will this limit the sub from reaching its full potential? The amp puts out real good clean power, I'd like the best possible box for my truck. Are there any pre-built boxes that will work well with …

I am building an enclosure for a 08 chevy crew cab I'm installing 1 fi bl 12 Im not sure what size port to use or how to tune it to the specs im going for my enclosure is 11"h 45.5"w 16"d rear height is 8.25" I am firing it up and plan to face the port to the front I wood like to tune it to 34 Hrz I am powering it by 1 T1000 fosgate with a 4 farad capacitor my box is 2.51 cuft minus woofer displacement can any one help me if you need anymore info please let me no I am knew at this so please bare with me

Next weekend I will be starting a new box build and was hoping to get some help from yall on an enclosure design. I could probably do what I did last time, just use RE calc and Google Sketch to design. However, I hear too often that the RE calc is not very accurate and tuning can be very off. I want to build this box to last me a while, so I'd like to do it right the first time. - Subwoofers being used are 2 AudioQue SDC2.5 15" - Power will provided from a SAE-1200Dv2 @ 1ohm - I'm not the best wood worker, but i can get a simple box built. I've done one already. I have a Jigsaw to do the cutting. Not the best, but it works. - I will buy MDF from Lowes. - Build will be for…

I don't fully understand Port Velocity. Using BBP I can figure the velocity but at what are the acceptable limits prior to encountering negative effects?

I have never done a wall before, and i am really interested in them. If its not too much trouble i was wondering if i could get schooled on them -- how to prep a truck for a wall, the do's and dont's, bracing, etc. etc. etc. I would like to become confident before going balls deep into this build and I don't want to be slapped in the face by how little i know half way into the build, ALSO i want to know what i am getting myself into before i start cutting. (ported, 10-20 cubes) i seen the build a wall build and it had a SHIT load of 2x4s.. would i have to do this to my truck? The truck will be a 1986 GMC Sonoma (S15) ext cab and the equipment is 2 or 3 (depending on how …

so ive built a few boxes before an they were simple an nothing special so i use a box calculater that i no longer have( computer crashed)! so im trying to build a box for this 15 btl fl to go in the hatch back of my 1982 mustang! i found a new box tuning calculater (torres) from smd site it has the height 1 an 2 an depth 1 an 2 so i figured hey it will work but it doesnt for me..it messes up an doesnt add height 2 in so i makes it just a square box i wana do 21" tall front 13.50" tall in back 17" deep an 35" wide.. with them specs i want sub up flush mounted an the port would have to go forward towards the top of the box! if that makes since.so THE would make the inside …

I know this question has been posted before all over, but many of the discussions just turn into b***hfests, and no straight good answer is given. Would stuffing (polyfill etc...), or lining (vibration damper, mlv, etc...) a properly sized and well built box make any difference on the sound quality/characteristics of the subwoofer it contains? I'm looking for one good answer please, not a million random opinions. My head is just in a daze after looking at how many odd forum posts that don't answer the question I'm posing. Thanks to anyone who has good knowledge on this topic!

I have an 08 cheny crew cab I would like to build an enclosure to go under the rear seat that will hold one BL 12"ran off of one T1000 fosgate amp this will be a daily application I will have to raise the seat to make it fit I will be raising the seat 4" the area I will have to work with would be best described as a wedge style box 55"w , 16"H , 8 "--9" D1, and 11" D2 Can anybody help me with die mentions for an enclosure for this application and ideas were the port should go and how large to make it I would lik to make this an up fire with the port coming out the front

Hey guy I need a good beating song with a long bass line ( about 3 min) box is tuned to 32hz and my car peaks around 40-44 on burps. I need a song that will last 3 mins. I have a comp in the morning and there is a kaos class ( average spl score over the 3 mins) I haven't had any time to try any on a tl any one have any sugestons?