SPL & SQ / Fabrication

i am building a sub box for a m3. it will be in the spare tire well. the box size that i am shooting for is about 0.5cu ft after sub and port. the cubes i am using i got for sundown audio. i am just looking for a nice sq sound. i am not sure where to tune it but my best guess would be 35hz. i am looking to go ported and need the port size and how long the port should be. i'm only running about 300watts.

I'm posting this up again....... THIS time heavily revised, it now has slot port calculations, and CUT SHEETS! This EXCEL based box calculator will take your enclosure size, woofer displacement, the wood thickness you plan on using and the frequency you wish to tune it to and gives you the GROSS enclosure size, dimensions (Including CUSTOM dimensions in which you input two of the OUTSIDE measurements and it gives you the last one.) PLUS gives you the cutout sizes for each panel of the enclosure you just asked for....... I'm putting it out for real world testing to be sure the math is good and the cuts are helpful......... Let me know ASAP what you think and what proble…

I am looking for good SQ 12s... I have two Skar vvx 12s now and they do not sound good at all. They shake my car like crazy but I can not feel the bass inside or out of the car.. So what kind of subs should I look for to get the best SQ in my Chrysler 300? Bass I can feel and not see!

((2 * 250.3125 * 10) - (0.159230769 * 2 * (12^3)) - (30.830229 * 2)) / (12^3) = 2.54299074 cu ft. That’s with port, sub, 45s and skeletal displacement taken into consideration. That makes the box tuned to around 34.02Hz if the math is correct..... let me know guys, what you think it is for 2 dc audio xl 10"s powered by an aq3500d1 in a 1ohm load, think my tunining is to high? still able to hit the lows you think? i wanted to be able to play normal music as well since its my daily driver 1st real build so im just taking everything into condsideration since this box is built already just waitin on my other d3100 to come monday

ok XTRemeasures, I think i'll deff be down next weekend for this event you where talking about, could you post up the details for me, and i'll call ya when I get there. thanks in advnace. Also, who else is gonna be in attendence?

I have an 02 mazda protege sedan I'm planning on making a custom kick pod out of fiberglass for my front doors. I'm going to put my hertz mlk 165 (6.5'') midbass component drivers into the kick pods. Will be ran off of an eclipse EA4100 amp bridged to 150w x 2 (for now) I like listening to rock music with a lot of bass around 80 hz. My sub is a dc lvl 4, ran off of a sundown sae1200, Right now its in a ported box tuned to 32 hz, but I'm probably going to be building another box sometime (idk what kind) what type of enclosure would be the best encolsure for my midbass drivers? I can make a sphere-shaped enclosure; does shape matter for a sealed box? while we're at it, what…

Powerbass xs15dv2 4.834gross volume 3.997net volume 63.375 sq inches of port (3h x 21.125w) 22.854 port lenght tuned to 38hz powered by orion 1200d @ 1ohm Are my calculations correct? If so do you think that is enough port area? 4.834gross 4.459net 42.245 sq inches of port (2h x 21.125w) 15.344 porth lenght tuned to 35hz Which one would you chose?

Hi I need some help designing a box for two Digital Designs 2512c D2 Each sub will be wired to its own hifonics brz1200d @ 1ohm My max dimensions are: 38W X 14H X 22D I am looking for subs+ port (centered) firing foward I listen to rap Thanks! p.s- i plan on printing what i get here and giving that to a shop (cut list, google sketch ect.) i dont have the right tools to do it myself

Vehicle : 1973 VW Beetle Location in the vehicle: Rear cargo area; sub pointed up Space available (Length x Width x Height): 35" length x 12" depth x 12-15" height Subwoofer make and model: Fi SSD Subwoofer Size: 10 Number of Subwoofers: 1 Type of Port (Kerfed, Slot, Aero, etc.): Rectangle w/ 45's What type of music do you like?: EDM, RAP, Rock, Is your goal SPL or Everyday Music?: Everyday high sq Tuning Freq (Hz): 35 - 38hz? Volume : 1 - 1.5? Questions: So I have modeled up a few different enclosure in win isd but I just want some confirmation as to what you guys think will work best for my listening needs. From what I have read on this forum that I believe Fi recom…

Wood Thickness 0.75 Height 30 Width 38.5 Depth 15 Sub Displacement 0.42 Port Height 28.5 Port Width 3 Tuning Frequency 32 Port Length 29 3/16 I get Around 6 Cubes at around 32 hz, after sub and port displacement...i just want to be sure they are correct. thanks.

can the single of a L-ported box be divided into two? instead of one port on one side and the sub on the otherside, it will look like ports on both end of the box with the sub in the center? if its possible, is there a calculator online for that? thanks...

So Im building my box but am confused as hell. Ive read I need 12-14sq. in. of port per ^3 but the manufacturer insists on 40sq. in. x10" long @32hz. for a 6^3 net box for my 18. Its an Atomic APX. When I spoke with them they said dont listen to anybody build this exact. WTF?! Any idea why? Its rated at 5000rms. Would the larger port make it unload at low freq. with that much power and thats why they say what they say? Shouldnt it have massive port noise?! Im so confused. Someone please straighten me out on why they want it EXACTLY as they say and yet the port area doesnt make sense?

I have 2 Orion H2 12.2's to be powered by 2 Orion 2500d's and want to build an enclosure for them,the only problem is i'm not sure of the air space to run.I want to shoot for max spl,i was told 4 cubes per sub tuned @34 hz is prime but i'm not buying it.Any help would be appreciated,thanx!

Sup guys, first time poster. I have a 2003 dodge dakota regular cab. I have 2 SSD 10" that I have in 2 sealed boxes behind the seat. I am looking to take one out and put 1 ported box for only one sub in. I have the box dimensions that I want just can't figure out where to put the port or how big it needs to be. I have a HiFonics 1600 mono That I am going to be wiring to the sub at 1 Ohm. The box dimension I have came up with will give me 1.25 cubic feet @33Hz. Height = 15 inches Width = 24 inches Depth = 6 inches Please help with port size and location

I decided to finally sack up and start planning a blow through. I just can't find anything around the web that actually explains. I really want to use aero ports. Do you think, if I sent two aero ports through the bed, and into the cab, that would be sufficient? I'd like to cut the smallest holes possible. Although I said before that I sacked up, I'm still pretty scared about cutting up my relatively new truck =). So, anyone have personal experience, pictures, or even tutorials? Thanks OH. Before I forget, My goals are to sound good, but have a really nice side of spl on the side. Just a daily ground pounder that sounds good,. I'm still trying to decide on which subs, bu…

Subs: two DC Audio LVL4XL 15's Here is the room I have set aside for the box. I can possibly go bigger. But, if possible, would like to not go bigger. 23 inches high 20 inches deep 38 inches wide I want subs up and the port up. I would like to use a slot port. Tunning could be at whatever would work best with the dimensions given. Anywhere between 30hz to 40hz would be fine with me. I dont know what my cabin peaks at but I have had two setups, one 18 tuned to 32 and two tens, not sure on tunning, Both setups peaked at between 40 to 45 hz. I will be using a US Amps AX3200DE to power them. This will be in a small SUV, 07' Honda CR-V.

Would someone be so kind to briefly walk me thru the process of how to properly secure a fiberglassed roof? Basically.. i'll take the headliner down.. build a wall in my car, then from the B pillar on forward, that will be fiberglassed, ok? this is where i get lost.... How do i attach the fiberglass mold to the vehicle so i could remove it again if i needed to?

I want to go with a 4" aero for this temporary build. I am going to go 24x13x13 with 4" aero at 14.5/8ths long. Tuning will be around 35hz? Volume should be 1.5ish after displacement?

sorry if this is in the wrong place, i wasnt really sure where to put it. move if needed. i just know lots of RE questions get asked so i'd thought i'd start it here. i posted the same thing on caraudio forum and thought i might as well post it here too. if anyone has any ideas i am open for anything. -getting around on a build for an 18 inch 2005 xxx. ive done some searching on box sizes and such for this and i am thinking... 8 cubes 34 hz 115 inches of port do those numbers sound about right? bigger box? more port? this is going in a 97 grand marquis...huge effing trunk...FTW amp is a saz1500 i was also porting the rear deck and taking out the back deck speakers. was t…

Hey guys, need to get a box built in next 2 days while im off work. If anyone would help out real fast that would be very awesome, thanks! Vehicle :07 santa fe Location in the vehicle:cargo Space available (Length x Width x Height):22x45x20 Subwoofer make and model:xcon Subwoofer Size:15 Number of Subwoofers:2 Type of Port (Kerfed, Slot, Aero, etc.):slot What type of music do you like?:all Is your goal SPL or Everyday Music?:music Tuning Freq (Hz):34 Volume : Questions:i would like to give as mush air space as possible with those dimensins, also subs up port back, id like to do the port along the bottom of the bo…

after building the enclosure, i want to paint the box, instead of using carpet. What kind of paint would i have to use. After im done painting it i want to add a shine to the box. I want it to be a shiney black color. What are the things i will need in order for me to achieve this goal?

Just got metered on an Audio control...Did it with music. One song (The one I figured was the loudest) hit 145.0db! The song was Plies - All Black slowed by wattz305 All the other songs we tried were in the 140-143.5 range. I went in figuring I'd be happy hitting those numbers. Around 40hz seems to be the sweet spot. Still wish I had access to a termlab though.

someone posted up a link to a SMdesigns thread that had a whole bunch of tips and help for building a good transmission line box. Whoever posted this up please let me know, as i am having trouble searching for it. Much thanks to anyone who has this link. Mike.

Whats the best agent to apply ur carpet to your enclouse?

So I got a box off ebay. Omg yes I did it. I am looking at it. Fits well looks good it's solid but the inside shows a different story. My speaker cups have huge gapr around them where air can escape. The glue is not thick or sealing the box very well. No I am not building a new one. a few questions. 1= What would you use to reglue it from the inside?? 2= What would you cover the terminal holes with?? 3= what are you installing the speaker with??