Photography

Yes, I've done that too. And don't worry, this was just for fun 05 xxx 18, 8 cubes @ 32 hz (this was the daily tune...we've changed the port for 45 hz now) and a whimpy Ground Zero amp (around 1.8kw). I think I used a 38Hz tone. The car was quite a crowd pleaser and the fun part was nobody at the comp played music. Today was just the warm-up and test session so we didn't care too much about the batteries. The doors flexed like hell. We tied them up today. Also duct taped the door seams. I hope we didn't shoot ourselfes in the leg with what we did to the car today...

http://dodgetruckworld.tenmagazines.com/ga...2500/365432.jpg

subs now facing cabin. cam audio sux!!!!

#1 #2 #3 (Chrome OR color-matched) #4 #5 http://www.trexbillet.com/index.php?sku=76...101&dealer= #6 Your suggestion (please provide link or picture) #7 Replace stock grille with stock Heritage edition chrome grille.

2002 L200, my daily driver POS... lol 1 RE SX 15 at 1500 RMS off a ov5500D(temporary till my kx2500 gets repaired) This is a temporary setup as i have another one of these subs and a much larger amp to install, just had to have some daily bass until then. The voltage doesnt dip below 12.8 for even really hard and long notes, tends to float around 14V constant when warmed up. kYkKVNeznTk

This is a friend of mine's company. They specialize in music video's and most likely will get into movies etc. I was even in one of the video's for a split second when they filmed a video for a Phoenix area band called "Unlimited Phlavor". T1_2rF4P-h0 Here's their Youtube page. http://www.youtube.com/user/Terniondc Anyways, I'm thinkn about having John Columbo(1/2 of terniondc) make up some great video's for the SSA sub lines once they all become available, what do you guys think of his work?

heres a short vid of my system in the GA. one atlas 15. sealed 2.5cf RE12.1 amp at 4ohms. not too bad, guessing somehwere in the low 130's on music maybe mid 130's on tone. i wanted to play a different song but the damn HU skips so i had to pick a different song.

anyways!(copy & pasted) obviously they are not for everyone. i like them though. blends well with the car to me. before i put the rims on i measured all around the height of the car to from where the Jacking pioints are. after i put them on there was a 3/4" lift all the way around. so it really needs a drop. i'll get coilovers eventually but not now. i can live w/o them for the time being. oh yeah and my car is dirty. needs a wash. i should really clay bar it though.

12" SE vs HC

finally bought an air nailer...just had to try it out. threw this together last night with a bunch of scrap peices I had, some I used for a resin collector some I used for a paint back drop, lol 4.0ft^3 w/81in^2PORT @ 39hz...

*edit*

Last week on thursday morning heading out to school and I found this: Lets just saw i was feeling like the So over the past week after being pissed off i called my uncle up to see if i could use his garage. So yesterday after sanding, fixing the key mark, and masking it off i painted it. I think it turned out pretty good: Before: After: Now just need someone that can do pinstripping and it will be all set. Anyone here that knows how to pinstripe and lives in L.A. area let me know. So wat do yall think? P.s. First time painting any type of vehical

i decided to give my car a wash. it was getting somewhat dirty. all clean! as you can see from the picture the clearcoat is on, but the paint faded underneath :icon_scratch:. eh well gonna take it to get painted. the dude that originally re-painted it, felt bad and said he would redo everything for 500.00, the price of supplies. not bad at all. im also going to see how much he would charge to buff out all the black paint on the trim to make it nice and shiny instead of repaint it. the trim is killing the look it should look very nice when im done with it. so list of things to do on the exterior: 1. Paint 2. clean the trim 3. Replace the dew wipes (paid for and waiti…

sorry about the crappy pics but i can't move the sun and mom's digi cam sucks(or maybe i don't know how to use it). The plan is to actually have it in the fiero by this evening. We will see how that goes. these next two are just of the 3800 hanging gracefully on it's hoist. These two are of the old cradle, first showing rust, 2nd showing where it was dented and twisted. these two show the new cradle with the welded on mounting plates. (note that little hump covered in plastic is the old engine, i'll be taking some pieces off of it later just to throw them on ebay.) had to block out my super secret secrets

Got it pretty cheap...Couldn't pass it up. MTX 9500 12" This thing is pretty beefy for a 12". I'm taking it to competition today @ 2.5 ohms on about 750 watts from my Sundown 1500D. I'ma see what I can do with it wired this way....Hope it works I'm not too much into MTX products but this thing got pretty damn loud at 2.5 ohm last night, wonder what it will do at say.... .5 ohm..

The JVC Chameleon (spelling??) will be coming out in favor of a Pioneer AVIC-N2...........(if anyone has a D2 with the DVD and navigation and would like a trade PM me.............. The doors need to have the components added soon, and with that will got the 100.4 amp for them, the 3000D for the 4 iCON 10" subs and so on. It already has 2 layers of sound dampening in the 'hatch' part to quiet it down...........After the subs are added I'll decide if I need more. Any suggestions? Comments, concerns?

I went to the Big Island of Hawaii this summer, went fishing, drove up Mauna Kea. A few shots stood out to me, hopefully you find them pleasing to the eye. Taken at 13,000 ft! That drive up to and back from Mauna Kea is a story to tell... If anyone wants to hear it, I'll spill it.

Found this gem last week. New in box Reference Class A 5.0. Even came with the old soundstream decal. Getting this in the mail could be better than x-mas.

Finally took the time to get the bumpers on the old girl painted. It was supposed to be painted about 4 months ago, but the guy flaked out on me, and never finished it, and didn't seem to have any interest in finishing it. So I got tired of looking at primered bumpers, and a buddy and I did some repairs and shot the bumpers black. Here's a pic of before: And here's some teaser pics, I've got to go put all the lights back in today, and I'll clean it up and take some better pics:

i had work at 6am in the morning so i got some cool shots off of the sunrise at work. sorry its not pro SLR quality. i only got an SD1000 the LA skyline: my RAAAAHD: i like it in BW thing was close that 6 dolla ebay headlight polish works lol thats it for today.

Soon to be installed in the setup I posted on ca-f.com Enough with the talk...onto the pics. pics gone pics gone Closest amp I could find pics of. pics gone That's an Atomic 5000.1 (thanks again Kent) The Zenon is actually very similar to the American Bass 500.1 and somewhat related to the Atomic

Few toy's I've been messing with these past few weeks. Poor little MOJO , all alone... R.I.P MOJO Feb 9th 2008 , and replacement is on the way. How it stacks up...Holds it own nicely between the big brothers. Uno, Dos, Tres, Cuatro, Cinco.......my my my..I've been busy.. Crappy photos, but thats what you get when your digital caml breaks and you use a cell phone camera , lol....... Got a 04-05 RE XXX 15" on the way as well....will have pics of it, soon as it arrives.

ok well i don't have any good pics of how she started her life, so here's what the pic from springfield shows her as... first thing i did was lose the grips and get a different trigger.