Photography

Seems like there is always something to work on.... This is my "new" Brute. yeah I've had 10 min of seat time on it.... yeah previous owner, an easy life on the farm eh? This is a pic of my Sportsman 400^^^ Had to weld on some more metal because the a arm got loose and "wallerred" a the mounting hole out. Using my little MIG, decided I didn't care to switch the flux core out and use gas. The original metal was also pretty thin so a constant weld was near impossible. Soon as I got that all done, went to replace the tie rods and found out the front right a arm is loose as hell too Just another day!

Bags are 50 kilo sacks baled in bundles.

Jamie asked me to post these pics for him

it all started when a friend asked me what sub can i build for his 2 8's. he already had some 5.25's up front and a hu. ran the whole system on hu power for about 3 months. finally installed an amp today main "theme" is low-budget front stage : trying out the amp, to see if it's worth the hassle of installing : can't drive to the cable shop without tunes subwoofer ssa special diy terminals amp installed diy rca's it's still a bit ghetto, but for how much $$ he spent, i like it. there's a big chance this summer we're going to do the frontstage right, as in sound deadening and maybe custom fg panels...

i'm in charge of picking out her system, and installing it. i got a T4-12 tarantula and a soundstream 880w amp. got all this for right around $350. not bad for a first system... i still have to build a box, i'm fiberglassing in her eclipse anyways what do you guys think?

Steve's pics of his flaming lawn tractor got me thinking... What do you mow six acres of hills with? Something like this...a Kubota L3830 with a Woods 7' finishing mower. 40hp (at the wheels? ) from a 3-cylinder diesel. Manual transmission, eight gears forward/reverse. Rear and mid-mounted PTO's. The front loader has a rating of almost a ton, and it's moved rocks nearly that size.

pwnt

I gotta say At least 177. The world record is only like 174.x isnt it.

I have two of them, going into my next setup, only 1 pictured. HC 2000's from Kinetik... These things are heavier then sh**.

http://www.cardomain.com/memberpage/644517/8

We had such a great time in port a thanx baby...and halloween was fun

my room is ungodly dirty

i was just curious as to why i cant fuking see pics posted by other members besides in the gallery..... i feel as if im missing out not being able to see the pics

Tsunami's Parent Company

just got back from that show last week, saw some cool stuff ...

Iv had a few people ask for some pic's of my newest set-up. i finally decided to go with the 2009 15" kicker l7 in a 5.0 CF ported box and a kicker zx1500.1 so here are some pictures. enjoy!

sail is in perfect condition, center board and rudder are anothrr story. Needs some fiber glass work. Figured i would built a little boom box for it. 2 5.25" speaksers, and use the schematics for head phone amplifiers (the amps for the big massive head phones that you can hear like regular spekaers) to make an amp with a place to plug my MP3 player in. Figured i would build me a center board and rudder from MDF, glass it, and hope i dont run arground and spring a leak.... at least untill i get my dad to spring for some birtch or cypress.

closed open im tie each rack to each door. so when you the left or right a door, that right or left amp will come up at you.

well... my last project has had a slight... enlargement so to speak... the 2000 Eclipse i did a while back with the oldschool L7 15 in full enclosure got a little bigger.... from this... to this... its not cleaned up or covered yet.... waiting for break-in before i decided if i will port the box or not... then it'll get covered in a blue vinyl to match the car with a black coverboard.... right now... pushing a hair under 750 a piece... something like 748 or so... amp benched at 1496watts rms and is doing nicely pushing these 2 L7 15's... tell me what you think so far.. -AcId- -EDIT- and btw... that dist. block was a temp wiring jobber not done by m…

The ported box was way to dam big so i had to do some surgery on my baby wonder how it sounds, i'm still letting the box dry

Scrap enclosure. i was going to finish a wicked one with the scraps from the box for hte 2 10's but i ended up lacking the correct lengths so i scrapped the 1/2 finished wicked one to make this, its almsot a perfect cube and is 1cuft @38Hz. Im Going to get some vid of the speaker in it which moves like a mother when it isnt in an enclsoure...high tuning means unloading . its just some POS speaker from a $60 bass tube. It be a pretty decent speaker if it had more BL. this may be for sale for anyone that wants it after i play with it. Would go nice with a W7 8 or even a TB 8. could even cut the hole out larger and drop a 10 in. for more low end just add some elbows and v…

Well, my bro finally deadened his doors this weekend and now decided he wants to change the doors a bit. Here's what I started with. All but two of the pieces laid out. All the pieces together without being aimed.

Working on a Pink floyd sleeve. These were taken Thursday night (same night of the ink). Spent about 2.5-3 hrs in the chair.