Photography

So I thought I would post some pics of my sub boxes, amp rack, and door pods. I'm still a slight newbie at this (especially fiberglassing, but I think things came out quite nice considering I did this in my apartment. The sub boxes have an AA Arsenal 10" sealed, the amp is my Zed Draconia with the BurrBrown chip and the doorpods have a pair of AA POLYS. Sounds awesome!!] Some of you may have seen these pics before.. My screenname used to be Texas Edition.

Here are some pics of a recently restored salt mine. Bare in mind that light in a mine isn't good and pics were taken with a modest point and shoot. Going down to the main hallway: The main hallway, you can actually cross under the whole hill and get from one side of the city to the other All the walls look like this: Stairway to the main chamber: Top of the main chamber and looking down: Chamber to the side of the main one, with a small lake on the floor: Chamber description: Miniature golf course, ferris wheel, bowling alley, amphitheater: Looking up from the floor of the main chamber: Looking up from the lake, towards one sealed off entrance: You can s…

just part of it. more (pics) to come friday/saturday the pin will attach to the bottom of the T. the C-shaped part will attach to the router. T part connects to the router with 2 metal rods. i can move the center of the circle right next to the bit. no more troubles with tweeter holes ideas for a good pin ? skil circle jig (pin goes in one of the 2 holes): only useful for big circles. smallest diameter ~8 inches. also, the pin isn't very stable

so I started putting together another car. its a 87 cutlass salon. http://youtu.be/UhdTtEksDGE

well i will start with my new system (lots of pics) straight line cutting owned me on the amp rack. luckliy it isnt that noticable when you are looking at it

Bought this motor in the winter and now its a finished project. Fi BL 15 next to the XXX motor with a 15" basket This was how I bought it to find the spiders were off the landing; I glued them back down and ran some power to it via free air to find that there was mad coil rub =[ Finished with an Fi recone and doing some testing; Its now a 15" in 3.9 cu. ft. tuned in lower 34

Feb 13th @ 1:23 pm-----21 3/4 inches and 7 lbs 13oz.------bouncing baby boy----- say hello to Sean Liam Edwards Mother and Sean are doing great-----me----I am hanging in there.

well i took the Impala out to this big dirt field near my house and had some fun here are the pics: once i figure out how to, i'll get a vid or 2

He volintiered to send me a carpet sample from partsexpress when i asked about it on SIN. GoodStuff, my many thanks in return Oh and for the girl...in the other OT thread...even though she told me not too ill leave it up for a few days...you perverts/dirty old men... its an old pic but the only one i had on my computer. Edit: Image go bye bye, no more happy feelings in the pants for dirty old people

Well its sunday night, im drinking beer watching football and grillin some food. Ribeye steaks..............................check Bacon wrapped jumbo shrimp........check grilled corn on the cob..................check Budlight lime................................check The happiest cutest baby boy ever.check

got my xcon in tuesday, and stuck it in today for a listen. definately needs a couple days to loosen up. in 2.5 cuft box at 35hz next to my dd ill try and get some vids up this week after it breaks in some.

2 per 12

I was flown down to Jamaica to photograph a wedding. I was there for 5 days all inclusive. Good time for sure but hotter than a mother. Pretty much the same routine everyday: sleep, eat and drink. The Island has some fantastic sweet spots but the streets are trashy and represent a low income housing project at best. Unfortunate. I could hang with the natives all day, some of the best people I ever meet. No wedding pics in this thread, those are for my clients.

I started on a new wall for my z car today, I got a decent amount of progress done, and hope to finish tomorrow if the weather is right. The subs are Lanzar optidrive 1532 15" subs. This wall is 8.3 cubes with 120 inches of port, tuned to 39 hz.. The box hopefulyly will peak at 44-45 hz. The last time I checked my RF was 43 hz. The whole box will be 1.5 inches thick when completed.

The Empty trunk... The Sub and again the sub from below the Sub/Box/Grill The interior The woofer in the trunk another 1 The H/U I know this install is no match for many of u over here... but due to lack of Money/Time .. am callin it the day!...so Dont flame plz .. so what do u think guys?

.

Got to go to the home and home tour concert they did last night @ Yankee Stadium the $400 spent on the ticket was well worth it..had the time of my life seeing some of my fav rappers perform. G-unit Kanye west Jay, Kanye, and Nicki Minaj swizz beats, Jay z Drake Beyonce Videos http://www.youtube.com/watch?v=y4faQoFP7Yw http://www.youtube.com/watch?v=TgA3TPa5uc0

Hey all, new here, and just got my Fi BTL hooked up last night. Just thought id share some other systems that I've had also. I started with a single CVR12. blew that, and got 2 more. I was going to get 2 more for a total of 4 12 CVRs, but Instead I got my Kicker L7 12s: This is what it looked like in an older box that I messed up on, with the FatMat showing: Those subs went through 2 vehicles and about 4 boxes. Then I sold that system to put a turbo in that car. But my friend gave me a deal I couldnt pass up on some Memphis subs, so then this is what it looked like: I've had many other smaller systems, like some hifonics subs with older amps, just no pictures o…

I was able to score a couple of Sundown Audio SD-2 8s for a little review. Here are some fun pics I thought I'd share. Boxes! The models doing their thing. The creator. ???><+_)(*&^%$#@! Stay tuned for some words on how they perform.

This is for convenience puprposes and to not f#(% the IHOP margins. If it's not supposed to be here, I am sorry and I won't be a jakcalope if it's moved.

http://i156.photobucket.com/albums/t14/jon...der03031408.jpg these are some designs she has worked and ready to put to fabric hes the dark side.... save it and then open it... the lines are from the program shes uses.. you can imagin. she sells them too.. she can make almost any emblem into a quilt... shes doing a lincoln now for my car

I haven't been on in a while so here are a few pictures of what's been going on. First, I bought a bagged S-10 with a custom built back half. Underslung Frame setup. Got my first pistol. XD .45acp New Tat And hanging out with my fellow white boys. lol Putting hoes in the Isuzu. ........................ Note* She's not really a hoe"

had to throw one in until the new amps get here. Couldn't stand going through bass withdrawl in my car.

Here are some pics of my Wheely King Monster Truck. I'm running the stock electronics. I've got a crawler conversion in it. Most noticeable are the Juggernaut rims and tires. I narrowed the rims by cutting the inner bead mount of the rim, reversed it and slipped it back over the rim shell. This also gave me the clearance needed around the knuckle. I opted to leave the steering stock for a more scale appearance. I working on some adapters to mount the wheels. Let me know what you think.