US AMPS

Hi, i was wondering does the MD.42 do 75 x4 @4ohm that this site says or does it do the 90x4 @4ohm that us amps says.

I might be getting a us amps, merlin m2.d2 for my fi Q, just wondering how low of an impedance it can handle. Seeing if i can get 2000+ watts out of it @ 14.4v.

I need to get in touch with him involving an amp of mine that he has and he hasn't been on ca.com in a couple weeks. I don't think Jeremy is scamming or anything, (he's Flakko after all ). Just need to get in contact and I haven't heard from him in 3 weeks.

hi, i was looking at getting a md1d but there is not a dealer that is not over a hour or so away and i was wondering if us amps does direct buying and what the price for a md 1d will be.

Ok I have two of these amps. One from 93 and one from 95. I have some questions about them someone may be able to answer. These amps have different boards. I assume because they are 2 different gens. 93 is a bit more compact than the 95. Both boards have the areas where it seems more components could be added to make them 4 channel. Is this possible or just dead spots on the boards? Next, I see conflicting info around the web. I realize these are 65watts per channel at 4ohm and that it is not reccomended to go any lower. Fine, good, whatever. I am wondering if they can be bridged at 8ohm. I have not installed them yet so I cannot test them myself. I see some pl…

can someone tell if these can be bought online anywhere? also can are these .7 ohm stable and finally what kinda actualy power dot hey put out? take in?

Anyone have ant information on the new ax 3000de? Ijust picked one up and was wondering if there were any actual tests done to see what this thing actually puts out. I think i almost cried when i opened the box and saw the amp for the first time. What do you guys think of it?

How good is the exterminator line amps and do ther do their rated power

Hi, I am new to this forum and I am looking into upgrading my current system and I was looking at the RE SE12 being powered be either a XT 2000D or a XT 4000D since this site says the XT 2000D only puts out 800 rms at 1 ohm now is that right or is that a typo error and also I am looking at the XT 1600.4 to run my speakers and again it says that at 4 ohm it puts out 125 but the US amps website says 100 rms and is that correct.

Would like to use this along with my USA-1000x! Anyone know where I can get one? Thanks!

what are the actual specifications for these two amplifiers? i keep seeing different ratings from different sites. even from the thread on here compared to the us amps site. lookin for the stats on paper.. not how much they put out when they were benchtested, i know theyre underrated.

I'm getting sort of a loud bass note when the amplifier turns on and I was wondering what could be the problem. It was a drop in install since I had an amp installed before this already and there was no loud turn ons with the other amplifier. Also, since I put the MD2 in, I'm getting a lot of noise through my speakers at low volumes. The noises go along with how my engine works (i speed up, noise pitch gets higher). The grounds are the same as I had before and I never had this problem, so does anyone know how to fix this or the loud turn on?

How good is the build quality on the xterminator series of amps? Thanks

hey i just wanted to see if anyone wanted to try out an AXTU300C i have another one im going to use to biamp my front stage, but while i am waiting for the speakers to come in and finish fiberglassing, i said to myself, "why not let the nice people on SSA try it out?" since this is a very esspensive piece of equipment, i will allow 5 people and to my discretion to be able to try this out. The sender pays shipping to the next location. the stats of this amp are as follows: 100x2@4, 160x2@2, 320x2@4 anything else youll find on the stats and pix page. if someone can bench it, that would be really cool. so yea people sign up!!! 1. DBfan187 2. ngsm13 3. ///M5 4. mrray13 …

Power numbers? Strappable? Minimum ohm loads?

What is the difference in wattage and everything thing else from the Old USA-100HC and the new one. By new I mean the last one they made?? Will the new 100HC produce more power than the DE1000??

What size wire should i use for this amp. I will be running it @ 1ohm to two rl-i10's. USamps website says 1200rms @ 1ohm, but I've read here that its 800rms @ 1 ohm. Thanks Ben

sorry, but not only is this in the wrong forum, but your post count isn't high enough for a FS thread..sorry bro. hang out a bit longer and then re post... *edited by mrray13*

was that girl always there? or isi t just me? lol

In an industry where people are afraid to deal with the small guys because they always feel liek they are vulnerable and customer service will not be consistent I am glad to say that US amps is not a company you have to think twice about when buying your next amp. I had a problem with my md2..... sent it back in for warranty, received a call from Greg immediately stating that they were waiting for parts from their suppliers and that there may be a slight delay in the repair of my amplifier. Since they were proffessional about it I told them to just keep me posted and I would be patient. A very short time had passed when i received phone calls from Greg and Hector stating…

What's the bigges guage I can shove into the MD2's outputs with out having to trim the wires? I gotta know when I go buy power...err speaker wire.

Whats a good street price for a like new AX2000 and tu4360 tube amp they might be 2 months old.Never abused.

I've seen the specs for both and was wondering what justified the extra money for less watts on the AX2000HC (2400 watts) vs. AX3000DE (3000 watts). I know they HC is for high current (down to .5 ohms) but is there something else I'm missing?

I've been racking my brain trying to figure out what amp to use for my BA Z6 comps. Well, I just bought a USA-1000x and plan on using that. What do you think about this combo? The 1000x doesn't have a high pass x-over but I think they Z6 passive x-over will handle it fine, right?

last night i was working on my system and i was hooking speaker wire to the right terminals. the amp is a I/S2200. there was a sub hooked up to the left terminal. while screwing in the first of the screws, the sub moved really weird and sparks flew off the amp. then the amp started smoking, i shut my car off and unhooked the amp. it was still smoking, i took the panel off of it to look at the board, there were huge burn marks and there was an aluminum piece on the side of the amp that was half melted.(pics later hopefully) i put the amp back together and hooked it up to power and ground to see if the power light would come on. it did so i hooked the sub back up and it wor…