US AMPS

im lookin for a set or 2 or xxx components. i live by detroit can anyone help. i have no idea were to find em thx

the screws on my amp are all rusted, some of them are warn down. i've been looking around for some philslot screws the ones with the square to grab on to the wire, but i've only found some overpriced ebay ones. anyone know an online store that has them cheap?

How good is the build quality on the xterminator series of amps? Thanks

I'm getting sort of a loud bass note when the amplifier turns on and I was wondering what could be the problem. It was a drop in install since I had an amp installed before this already and there was no loud turn ons with the other amplifier. Also, since I put the MD2 in, I'm getting a lot of noise through my speakers at low volumes. The noises go along with how my engine works (i speed up, noise pitch gets higher). The grounds are the same as I had before and I never had this problem, so does anyone know how to fix this or the loud turn on?

I Have A MLT setup and I want to know the advantages of this setup.I have two md3d going to two 13w7's. Under this setup I have one md3d going to my subs and the other is a slave amp.The advantage I have with this setup is I only have to play with one gain on the amp which is good and also when I had played with both amps before I have to make sure that both amps were even on the gain so the subs would move the same.Now with the new setup the subs are more even when they are under excursion so better sound.It seems that the subs hit harder and cleaner. :bigclap:

Would I be able to run the MD22 at 2ohms x1? Looking to power a SI 12'' BM -Ben

Why the price increase again this year on the Usamps and RE products? I was looking at bringing in USAMPS Xterminator series but they have gone up.

ok guys here is the deal i have 4 us amps i am going to be installing in my jeep and i need to know what size fuse to put on them i have (1) 4300X (1) 4260 (2) PT-800 what i would like is the fuse ratings for all of them and a suggestion of what size fuse i should use on my power wire to all 4 amps. i am pretty sure the fuse rating on the 4300X is 60Amps I plan on just adding all the fuse ratings up and getting a fuse about that size. thanks -=ScottY=-

hehe this site needs more exposure... after slaving by his computer for hours maybe days, Ravo has released a working database www.12vdb.com www.12voltdb.com add equipment you own or feel that you have a deep connection to, write reviews, etc etc!! 12vdb is now open!! thanks to all who have helped (especially Ravo and Megahurtz)

Hey guys, i've got an MD22 amplifier, and was wondering if it was capable of handling loads down at 1.33 ohms or lower without compromising the internals (3x 4-ohm components / channel / parallel)? I Realize that it'll void the warranty, but is it safe to run at these loads?

i have 2 RE SR 10 D4's so which us amp do i need? i might do eight later. The set up is in a 97 S-10 blazer so i have some room. what kind of current draw should i expect? my blazer is all blacked out so black would be sweet but what ever works...

well more like Gunmetal: ^^^ sorry bout the blur Some crazy stock:

I am new to the forum but I am upgrading my amps and I need to know is the AX the top line and what would be the best amp for a JL 13w7 I am looking at least a 3 ohm impedence no more than 1500 watts.Has anybody heard a 13w7 to a U.S. Amp.I need to know as much as possible by one day thanks

great i wish i knew this forum was here,i have been hering so many rumors about the us amps beeing made over seas i know the ax models are here,but are the merlins made in the us or over seas?all i here is how great us amps were when they were made here that what the car audio guys say,but the ppl here have never heard of them,there only like one audio shop here that caries them all the other ones have dropped us amps,claimign there not what they used to be,im looking to get the md1d and a re mx15 for maybe competitions,if they are made here,also are the re's made here i heard they were

I'm sorry to say I don't know much about U.S. amps. I have 2 that I'm trying to find some info on. Value, wattage etc.. any info would be much appreciated!

Well i dont know how but i found flakko and then i found this site and here I am. I've never owned a us amps but have dreamed of it back in the days of highschool and college...LOL! I currently have kicker sx line of amps but am trying to unload them right now. So anyways just thought i'd chime in and say hello.

I have two of the 2004 model MD2D amps and was wondering if they were strappable or if it was a god idea to do so? I'm planning on running them on two Orion H2 15's with dual 4 ohm coils. Would i be safer to just run each amp to a single sub?

will md3d's work on a 16v system? do they need to be modded? please let me know, running 4 of them to 8 RE 15's in an astro van, upgrading battery/electrical system and would be nice to know for planning. Thanks! Greg

where can i get one? i recently picked up the US-X3 x-over off ebay, but they didn't send a wiring harness.

I must voice my happieness!! My Amp search is all done and Mmmm it sounds so so good lol! Lets hope. I have 2 of these amps and 2 are still on the way. Here is what I ended up with... US Amps USA-50 for Tweeters US Amps USA-400x For 5.25's Midrange US Amps USA-600x for 8" Midbass US Amps USA-300x For 12" subwoofer I was able to get all the X series amps in Chrome so they will all match. The USA-50 is older and did not come in Chrome, so its purple. I plan to install circuit board up, so it should not be that big of a deal. Sadly this is a very extensive install so It may not be till Spring till I can get it all done lol! It would be cool if I could find some ins…

OK I have a old USA-3000 it still works however there are four burned up resistors right by the power supply they are M106 M107 M116 and M117 they are light blue and have five lines on them Red Gold Green Purple and Yellow I looked at the amp guts site and every amp that us amps ever made while they were in Florida had this resistor in them. Does anyone know why they are blown and if I can just replace them and not have to replace something else as well? also does anyone know what value these resistors are so I can buy new ones?

I have an old school USA-25 amp... wanted to know where I could buy some plugs for it? Any help would be great!

does anybody have the original specifications to it,flako?since i believe yall are sorta with re could u ask in the shop,i bought one 175 shipped and just want the orignl specification,they are no where to be found since its a old amp,dont know when they were made tho

i just got an AX1000de, i dont see any internal fuses so im guessing that im going to have to do an external fuse for it. my guess is a 100 amp fuse . do any of yall have any input on placement of the fuse, the fuse size, and where i could get one, and a fuse holder for a reasonable price. thanks

would like to get some numbers are they .25ohm stable link the older ones