US AMPS

Hi, i was wondering does the MD.42 do 75 x4 @4ohm that this site says or does it do the 90x4 @4ohm that us amps says.

OK I have a old USA-3000 it still works however there are four burned up resistors right by the power supply they are M106 M107 M116 and M117 they are light blue and have five lines on them Red Gold Green Purple and Yellow I looked at the amp guts site and every amp that us amps ever made while they were in Florida had this resistor in them. Does anyone know why they are blown and if I can just replace them and not have to replace something else as well? also does anyone know what value these resistors are so I can buy new ones?

OK I have a old USA-3000 I am looking for any info I can get on the SAT LINK I have the software but need to know more about the wire or interface that connects the amp to my lap top. Also I am looking for a copy of the manual for the 3000 I need a Badge (OLD SCHOOL STYLE) and the original style bass knob. I also need to know what Resisters were used in the US AMPS USA model the little blue ones that are right next to the GATE RAIL'S (Every US AMP has these Resisters) Yellow,Purple,Green,Gold,Red are the 5 strips and the part is lite blue and very small. Also how do I disable the amp from turning it self off? I have heard that the SAT system with out being plugged in can…

Hey guys, I have two US Amps 3200's and I am wondering if I need a MLT to strap them? From what I understand, they can be strapped. I cannot find any info on the web regarding what and how to strap them. Can someone offer me some insight if they are strappable? If so, how would I go about it? There is no master/slave switch on them, hence why I think I'll need an MLT module. Both of the amps have US Amps/RE stamped on them. They have the grey wire, not the red. Thanks!

I have a md 2d but i don't know how to set it. i don't know what the sub sonic and lpf does. could tell me a step by step to set it?

hehe this site needs more exposure... after slaving by his computer for hours maybe days, Ravo has released a working database www.12vdb.com www.12voltdb.com add equipment you own or feel that you have a deep connection to, write reviews, etc etc!! 12vdb is now open!! thanks to all who have helped (especially Ravo and Megahurtz)

will md3d's work on a 16v system? do they need to be modded? please let me know, running 4 of them to 8 RE 15's in an astro van, upgrading battery/electrical system and would be nice to know for planning. Thanks! Greg

about the md 1d is supposed to draw 90 amps at 1 ohm1200 rms but how many would it draw at 2 ohms 750 rms..im guessing about 55 -60 amps,i really wanna stay away from a ho alt,400 bucks is alot of money for one,and i believe 750 rms a be good enough for everyday listening,need to keep my hearing

I've never seen this one before. not mine by the way just thought it was saaweet http://www.caraudio.com/forum/showthread.p...070#post4214070

I'm looking for a U.S. Amps Optimizer. Anyone selling one? Anyone ever use one? Is it worth it? Does it do a good job.? What do you guys think? Let me know please.

Read the rules please!

I have a guy that wants to trade my md42 for a AX4300 and Kicker zx750.1 . His AX4300 has a bad channel maybe. My problem is I have read some things about the AX when first released having issues. he bought this from IKES. anyone got any info or advice on how to know if this amp was a first run or not? his amp has static on 1 channel also.

My cousin finally let go of his AX1000, so glad I got it Very excited Im running a Fi Q off of it and compared to the power I was previously giving....WOW...just....WOW. So clean and very crisp. Can not wait to do some more testing tomorrow

I got this 2000X and im trying to push out 2500Wrms @12V to push some four 15"s RE SE's does anyone in here know of a way or at least were would be a good place to ask?

Hello ! Ihave a question about the Board colors fom the US AMPS USA 400 ! Whats the differend between the green and the blue board ? Sorry for my bad English ! Nice regards Basti

Picking some up this weekend, just need some info on them in terms of SQ, output as its been debated on forums and I am totally clueless with Usamp amps as I have been a Trutech Hammer fan all my life. Any info/views ?

What makes a AX2000HC worth $1000 more than a AX2000? I know that volts x amps = watts. I have been told that a AX2000 produces 600 watts at 4 ohms and that a AX2000HC provides 150 watts at 4 ohms. I don't understand. Does the High Current amplifier have a extremely low voltage? Does the AX200HC have a much better power supply contained in the same size package? What IS the difference? I know from experience that US Amps builds a heavy duty amplifier, but specs don't help me understand what I am getting for my money.

a friend of mine is looking for an amp like this, is it a digital amp, and do you have authorized dealers other than in the wec (arizona) and where are you located? thanks

My cousin has a MD2D that he got earlier this year on his 4 12s and was wondering if he added another MD2D or MD3D could he strap it with his pre-existing MD2D? If so does he need some thing that I heard about a few years ago called MLT or does he just need another set of RCA jacks or something or is it even possible to begin with?

JR would probably be able to answer best... but, does USAmps have any flawed heatsinks for the Xterminator series? I would love to get my hands on one so I could make an amplifier linking piece for my 2000d & 1600.4

A little exerpt from a catalogue posted by JR on termpro. yummy US AMPS at CES booth #N2419

Hey flakko, I was wondering if you can get ahold of something that would make my amps look like one big amp sitting side by side. Kind of like the older RF amps, just an endcap that connects 2 amps and makes it look like the amp continues on. It is for the IS series BTW. I think it would look sweet if I could do that. Let me know man, Alex

I'm getting a VL-50 and I need specs. Thanks

hi, i am going to be getting a XT-1600.4 in a month or so and i am going to be putting it in a false floor and i notice that it has fins and i am wondering are they for looks or do they serve as the heat sink like jl's. because i need to know where to focus the fans on since it will have pexiglass over it but i will try to make the flase floor as breathable as possable. and does it make 180 at 2 ohm right. and also i saw that the input goes up to 6 volt but i was planing on using a line driver because i dont want to spend alot of getting longer rca's/ and most line drivers arre atleast 8 volts

if so what kinda wiring do u have?