US AMPS

^ ^^ ^^^^ ^ ^ ^ ^ ^

I have 2 of them strapped powering my AQ HD3 15's. I am running them off of a Kenwood KDC-X891 HU. The only problem I am having is when I start my truck I get noise through my subwoofers it is more audible when I first start my truck and when the HU is loading the CD. Then it tones down a little bit once the cd starts to play I can not hear the noise anymore because my subs are playing the music, but then when I turn my truck off I have a turn off thump. Is this something to do with the HU or the amps? I did have 2 Viper 1200's strapped before the MD3's and I was running an Eclipse CD5435 HU and I did not have any turn on or turn off noise. Since then the Eclipse HU's RCA…

Does anyone know where I can find an owners manual for this amp? I find conflicting info about it online.

What size power wire does the AX-TU600C accept?

I have a USA-200 pushing a 12" RLP on a single channel at 2 ohms at the moment. From my understanding the 200 is bridgeable at 2 ohms. This is one of the first usamps I have owned, and I am unsure of which terminals to use for bridgeing. Anyone know if it is the right + and the left - or vice versa, or if I am completely wrong and the amp is not bridgeable @ 2 ohms?

was wondering if i can strap 2 of these amps together???

Hi guys, recently i bought some new RE Audio and USAmps equipments: 4x RE Audio 6.5CompSet, 4x RE Audio SX12" dual 4ohm, 2x MD-21 and 2x MD-3D here's a link http://forum.ecoustics.com/bbs/messages/4/468403.html Now I have a question about the MLT function it's says in the owners manual that the Impedance should be between 4-8ohms, I thought that the final ohm will be 2ohm since each amp will be wired to 1ohm (2 RE SX on each MD-3D), now I'm confuse what power do I get if I wired them as the owners manual shows 4ohms I wont get the full 4000wrms between the two right? because it's not wired down to 2ohms. can anybody help me out here? and the other question is about the M…

Have 4 fresh Usa 2000's that have never seen power. Going to run one one my FI Bl 15 in my 2001 Nissan Maxima with aftermarket battery and stock alt. I wont be killing this setup but will it not kill my system until I get an 130Amp alt for it...And possibly a second battery if I need to??? Again, I wont be pushing it way too hard but ive heard these amps draw alot of current.

I Have A MLT setup and I want to know the advantages of this setup.I have two md3d going to two 13w7's. Under this setup I have one md3d going to my subs and the other is a slave amp.The advantage I have with this setup is I only have to play with one gain on the amp which is good and also when I had played with both amps before I have to make sure that both amps were even on the gain so the subs would move the same.Now with the new setup the subs are more even when they are under excursion so better sound.It seems that the subs hit harder and cleaner. :bigclap:

Where would be the best place to get these? About how much will each of these run me? Does the MD.41 do 50W x 4 or 60W x4? Thanks!

Anyone know real quick what colors the US Amps USA-50 came in? I am thinking of using one to power my tweeters and have seen it in purple and black. All my other amps so far are Chrome, but are all part of the Xterminator series. Thanks for any help

U.S.Amps made some steps in europe, and I am proud to announce that U.S.Amps will be availeble this summer in the Netherlands, Belgium, and Luxembourg. Date off release and contact info at the end of next month. With Best regards, Maarten vd Wal Rep, Importer, Distribution. BENELUX.

Hey man can you get my a cover for a US Amps us-x3 and a VLX-400 end cap? LMK man.

Will the md3d do rated power or a little more? who's clamped one to see what it actually puts out?

Hello I'm new to this forum. I have a few questions that I would like for someone to answer for me. I have the like the title states a US Merlin MD22. Now every where i have read says it do the following specs Power: 200wx2 @ 4 310wx2 @ 2 650wx1 @ 4. And on the box it says 257 @ 4 ohms and 352 @ 2 ohms. So I want to know the truth, whats the deal? The first thing i noticed is the fuse rating (3) 25 amps, now i know that if a amp has a 60 amp fuse. It will do somewhere from 650 to 750 watts. And the second thing I noticed was the power and ground connectors. Now I know it takes like a 4gauge wire. And the thrid things is that it is made in the U.S.A. so I know that its …

sorry, but not only is this in the wrong forum, but your post count isn't high enough for a FS thread..sorry bro. hang out a bit longer and then re post... *edited by mrray13*

Hi there, just wondering if anyone has info and/or specs on a b100. I have seen it described as a "powered crossover" was this to sneak it into competitions? Any info is appreciated. Thanks in advance.

What is the difference in wattage and everything thing else from the Old USA-100HC and the new one. By new I mean the last one they made?? Will the new 100HC produce more power than the DE1000??

Hi, I am new to this forum and I am looking into upgrading my current system and I was looking at the RE SE12 being powered be either a XT 2000D or a XT 4000D since this site says the XT 2000D only puts out 800 rms at 1 ohm now is that right or is that a typo error and also I am looking at the XT 1600.4 to run my speakers and again it says that at 4 ohm it puts out 125 but the US amps website says 100 rms and is that correct.

i got 2-ax1000des and a ax2000hc has any one did any testing yet would like to jet some # please

Here it is guys, your chance to have your girl be the RE Audio spokes model for US Amps/ RE Audio at SEMA 2008 and CES 2009. Please send pics to [email protected] or [email protected] for approval. Please include all contact info. If your girl is lucky enough to be chosen we will fly her to Las Vegas and Pay for her hotel while she is there.

ok ive decide to go with the merlin series d class .its either the md.1d or the md.2d, i here the 1d is overrated and then that it will do exactley what it says it will,then the md.d2 i aint ever heard its under rated .. i heard it could do about 1800 watts @ 1 ohm.how big of a difference are they,is the md.d2 worth several hundered more?,ithan i noticed on here it says the md d1,2 and three all have 30 amp x 3 fuses,that aint true is it?hows it gonna give more power without more amps coming in,the effiencey should be the same since there same series and class

can someone(flakko) get a pic of the crossover section along with the specs for frequency and slopes? thanks in advance

wats up guys anyone with comment on the new md1d is it a strong performer does rated watts? underrated etc?

Hey i just got 2 new RE REX12 for my little home audio setup. These things sound very good for the 120 i spent on both. And there only off of like 350 wrms. Really like how they look too. Good job US amps/ Re Audio. And they came with some cool stickers.