US AMPS

i was told straight from mr kim himself to take them down temporarily. all discussion will be continued at a later time topic was not deleted, it was hidden.

Well, it was just me and Mr. Casey Walsh I thought it was a fun little time. Walked through the factory, there wasnt much production actually, just one guy in the back soldering, and dirk in his lab workin it because the CES stuff was set up in the work room. Ill have pix later on tonight but ill post what i thought was the most informative part of the tour, the interview with JR. This is just the section of the Q&A in which people from the forums asked questions. We talked for a good hour afterwards about different things usamps has been designing, most notably their venture into home audio But that is for another time. the vids might take some time to load, ki…

Just as the title states... Who wins in terms of SQ? In my eyes, the prices are comparable, and I've heard good about both. I'm leaning towards going with the USamps XT series over the GTO's... One major issue that shouldn't be so major is the looks... The GTO's a gawdy, and the XT's are plain & simple. Any thoughts or input on the comparison?

hey i think this is a great place to put some usamps reviews up. Just state what amp you used, what you liked about it, what you didnt, what you have used before, and compare. I want an HONEST review... dont just go praisin usamps. i want an unbiased reveiw here. ill start you off,,, something at ca.com http://caraudio.com/vb/showthread.php?t=125340

hi, i am going to be getting a XT-1600.4 in a month or so and i am going to be putting it in a false floor and i notice that it has fins and i am wondering are they for looks or do they serve as the heat sink like jl's. because i need to know where to focus the fans on since it will have pexiglass over it but i will try to make the flase floor as breathable as possable. and does it make 180 at 2 ohm right. and also i saw that the input goes up to 6 volt but i was planing on using a line driver because i dont want to spend alot of getting longer rca's/ and most line drivers arre atleast 8 volts

Hey guys just got myself a ax-5600 us amp, and when connected i am getting slight alt noise, what can i do to get rid of the noise. My setup is as follows 880prs hu, HD-62 cdt components (front)and Cl-60 coxial (rear) with a 12" alpine type r in sealed box. Used 4g for power and ground and phoenix gold zero point rca's. Also can someone explain the crossover in the amp, when i cross @ 50hz on deck for sub and 50hz in amp i get no bass. i have to set d xover in the amp midway to get fairly enough bass. How does the 50hz to 500hz on the amp work. thanks.

Puggsley456's review on the MD1D Thanks for the review!

I took out my old PG Xenon 1200's and puttin in two 07 MD3D and man my subs love them and they are powerful.This is my old setup with the Xenons and now with the US.Man I am pretty happy with the new amps My car is under gallery section under Ultimate Atima www.Audio2000az.com

I still can't believe how big this amp is for a front stage amp. Wow What a beast and I love the plexiglass bottom. I was thinking of going one for the amp and this saved me some time and money. Shes going to power a pair of Seas Excel W18NXs and Seas Prestige 27TBFC/Gs. They are in the mail and should be here monday or tuesday. . Thnx again Denim and Flakko for making a happy customer.

07 md2d. does it have a bass boost or would i just have to use a equalizer

Feeling very proud to use USAMPS ,i just wanted to let everyone know what these amps are capable of...In our SEAT MARBELLA (very much like a Panda)using two USA 6000 and 2 15'' RE AUDIO MTs (2 ohm/coil paralled) driven by one Stinger SP 1700,we hit 158,7 dbs@ 66 HZ, certified in Street max 1-2 class at the 2005 Hellenic Finals.The real crazy thing is that it only took us 2 hours of tuning (we took the first measurement 8 hours before the beginning of the event) to reach that score, so anyone can understand the potential of this setup.... Imagine the score after one month of testing, at the right impedance and at a higher tuning frequency (69 - 71 HZ).......

I just got a 4000X and i was wondering if anyone has tested to see what type of power this thing is putting out. One thing i wasn't expecting, its smaller then my 2000X, hope thats not a sign that im going to be disapointed in its performence Any info you guys got on this amp would help Thanks,

The updated USAmps.com website is up. It is missing some info and some specs, and that video of the girl talking about the amps is gone. Very attractive site, just needs much more data still. Edit, I just found the TeamSSAudio.com link still up, it is under the partners button.

What size power wire does the AX-TU600C accept?

hey guy my friend wants me to buy his us amp 50 hc but we dont know the specs on it. does any one know them? is this amp any good? -Thanks

OFFICIAL WEBSITE Hey everybody! First off i wanna say thanks to Aaron and all of the SSA krew for having a USAMPS message board up in here! Well any questions you have about our products or the company itself, i will try my best to answer them. Remeber we are here for YOU. Also feel free to post reviews of our products NEW AND OLD! you can contact them by callin them toll free: 877 267 9360 or emailing: [email protected] [email protected] Again thanks for havin us here! Reminder: To those of you who are looking into buying an amp from us. The Xterminator line is the Cheapest, our entry line for those of you on a budget, but even for a budget amp, these…

I plan on purchasing this amp very soon to run my planned active front stage setup and I would like to know how much power this amp puts out at 8 ohm and 6 ohm. I also want to know just to be sure would I be fine running 2 channels at 8 ohms and 2 channels at 6 ohms with it. Thnx in advance to any and all that can help me out.

where can i get one? i recently picked up the US-X3 x-over off ebay, but they didn't send a wiring harness.

Hi i'm from Bs. As. Argentina. sory for my english I speak spanish. Well. I want to buy US AMPS and RE AUDIO products for my car It is very difficult to obtain here (Arg.), because the prices in the commerce are very high by the taxes. I want to buy products abroad and to bring them by shipment. can somebody help me? thank you very much

I searched the specs thats pinned but theres nothing about the older amps... a friend has the VFL 400 and i was woundering what it would do ??? might not be vfl ? but the amp is a Us amps & its about 7ft long

Does anyone here speak to Flakko/Jeremy on a regular basis? I've been trying to follow up (leaving voicemails and PM's) about my MD2D that I sent in back in May '07 but received a pretty bad conditioned amp in return, so I want to see where the DHL claim is at. Sorry for airring out some of the details but I'm pretty upset at how long this is taking and would like to see if there's a more direct way to contact him other than his cell. If anyone can give me some info or point me in the right direction, please do. Thanks, Steve

I have 2 07 Merlin MD3's and i did have them strapped but I had to take them out of strap mode because the master amp was slipping in and out of protect. With them working individually I do not have that problem but I am having problems matching the output. I can play one frequency and balance them out to where they put out the same AC volts at that frequency but once I change frequencies the amps are not balanced out anymore, one will be putting out more than the other except for on that one frequency that I set them to. They will be out of sync by 10 AC volts on some frequencies. In strap mode they put out the exact same power at all frequencies but it is slipping in an…

great i wish i knew this forum was here,i have been hering so many rumors about the us amps beeing made over seas i know the ax models are here,but are the merlins made in the us or over seas?all i here is how great us amps were when they were made here that what the car audio guys say,but the ppl here have never heard of them,there only like one audio shop here that caries them all the other ones have dropped us amps,claimign there not what they used to be,im looking to get the md1d and a re mx15 for maybe competitions,if they are made here,also are the re's made here i heard they were

How can i strapp 4 of these beasts to a nominal 0,25 Ohm impedance on a single super battery only for burps? I'm thinking of using them on my Street max 1-2 setup to replace my 2 USA 6000. Is it safe?Has anyone done it?Is there any strapping diagram available?

It just fried and I wanna know where and how much it would cost to get it repaired. I just PM'd flakko about it and I hope theres a warranty that comes with it. but if not im going to have to cough up the cash and get it fixed.