US AMPS

Anyone know where I can get my old SE12 reconed? I have a bare motor sitting in my closet that I wanna give to my little brother for graduation/birthday

Just wondering what the current draw is at 4ohm.

I must voice my happieness!! My Amp search is all done and Mmmm it sounds so so good lol! Lets hope. I have 2 of these amps and 2 are still on the way. Here is what I ended up with... US Amps USA-50 for Tweeters US Amps USA-400x For 5.25's Midrange US Amps USA-600x for 8" Midbass US Amps USA-300x For 12" subwoofer I was able to get all the X series amps in Chrome so they will all match. The USA-50 is older and did not come in Chrome, so its purple. I plan to install circuit board up, so it should not be that big of a deal. Sadly this is a very extensive install so It may not be till Spring till I can get it all done lol! It would be cool if I could find some ins…

I need to know if the amps are unregulated and also I have two 07 md3d amps each pulling 240 amps of draw(2 x 240=480 amps)Will upgrading my alternator getting up to 400 plus amps will I get the full potential of the amps?

I just checked the specs on this amp and it is not very high only 200 if I am correct.The JL amp is something like 400 on damping factor.Can somebody correct me if I am wrong.The higer the better if I am right.

does anybody have the original specifications to it,flako?since i believe yall are sorta with re could u ask in the shop,i bought one 175 shipped and just want the orignl specification,they are no where to be found since its a old amp,dont know when they were made tho

alright so the amp i originaly wanted has been discontinued, i found it but i think i will go with a good company instead. i am now torn between US, and Sundown. it basically comes down to the price and where i can find it. since this is the US Amp section i thought i would ask you guys. whats the price on the US MD-2D? and what are some internet dealers?

Puggsley456's review on the MD1D Thanks for the review!

Hey guys little intro first, my names Lucas I'm 22 and I live in Orange County California. I'm currently running a Kenwood X591 HU and the US Amps MD-22 and a pair of RE Audio SR12D4's in a way oversized and kind of sealed box (leaks like a mofo). Stock 6.5 speakers inside for now : ( I can't really give much of a review on the amp because its only about 15 minutes old, but those 15 minutes were pretty good. A little hot but good. Question though the bass remote seems to be different than others i've used. It seems like it has no relation to the actual bass boost like the one thats on the amp. So what is it actually controling and is the blue light ever gonna come back on…

I've searched all over and have found only a little info on this amp. I do have the white pages. Any and all info would be greatly appreciated. This amp should be very flexible for the install but I'm not sure how to use it best.

I am new to the forum but I am upgrading my amps and I need to know is the AX the top line and what would be the best amp for a JL 13w7 I am looking at least a 3 ohm impedence no more than 1500 watts.Has anybody heard a 13w7 to a U.S. Amp.I need to know as much as possible by one day thanks

I was wondering if anyone has had any experience with these. Pros? Cons? Are they worth the money? If not what would you recommend. I listen to mostly, hip hop, electronic, and funk. All opinions will be appreciated

how does a Fi BL 12" fully loaded with a Md1d amp sound? sounds nice to me... but do you think i can go bigger?! md2d?! or probably too much power? any suggestions?

what size power wire would the md2d take cause i have a Rockford 4 gauge now and i want to know do i need to upgrade to a 0 gauge b4 i get the amp if i don't have 2 i wont so plz help

I've seen the specs for both and was wondering what justified the extra money for less watts on the AX2000HC (2400 watts) vs. AX3000DE (3000 watts). I know they HC is for high current (down to .5 ohms) but is there something else I'm missing?

i just bought some new subs and im looking for something thats about 2000rms or alitte above and someone told me that 2000x would work really good but i thought i heard those were hard to find.Any info on this??

I had a AX5600 in my car being ran active off a 9835, powering ID OEM mids, Hybrid L1 tweeters and 1 12" RL-p. I've pulled that system out to use the 9835 and amp in my dad's F150, but I'm probably going to stick with some passive TypeX comps in there and 2 E8s under the seat. My question is, are the AX5600 speaker channels bridgable? I'm going to run some old Type-R coaxs off the HU for the rear, but want to send the comps more power than just the front channels. Thoughts? Next, I'm picking up an XT800.2 and two XT800.4s for my car. I'll be running the same L1s, but pairing them with new 2ohm versions of the OEMs. The RL-p is going to be ran IB. I plan to bridge one of t…

i need a us amp md2d very very soon for the 15s, who knows where i can get one from for cheap would really appreciate it trying to spend like 350 checked ikesound they had one for $299 but the pic didn't look like the one i want but the title said it was right so please help

this is probably dumb but this is my first us amp and i noticed that on my md1d there are 2 channels even thought it is sold as a mono amp. my question is most amps i have owned had the bridged output marked on the amp. this one doesn't. can i just use a positive off one channel and negative off the other? does it matter which? thanks in advance for helping the newbie.

great i wish i knew this forum was here,i have been hering so many rumors about the us amps beeing made over seas i know the ax models are here,but are the merlins made in the us or over seas?all i here is how great us amps were when they were made here that what the car audio guys say,but the ppl here have never heard of them,there only like one audio shop here that caries them all the other ones have dropped us amps,claimign there not what they used to be,im looking to get the md1d and a re mx15 for maybe competitions,if they are made here,also are the re's made here i heard they were

Is this amp going to be discontinued? Whats coming in its place?

I got 2 of the USA 700T or T700 ..whatever they are...havnt got them installed yet...wont be able to for a couple more weeks... I wanted to use them cause they were efficient and wouldnt kill my electrical system... wondered if anyone had some and wanted to know how they sound..... I have 2 identical with the spacer to join them so they look like one big amp.... thanks Mike

Flakko answered all questions and of course made me a SMOKIN deal on some Merlin amps....... I haven't owned US since 97' and I was happy then so expect i'll be happy now. I I would though like to ask for any reviews of the MD22 & MD2 amps or the others as well. Anyone actually looked at the ouput with a scope to determine, with adequite power supply to amp, where they start to clip at? Any info wold be nice I only found one thig on google . I don't frequent here as much as ECA and SD but I will now have to come here alot more often!.

Hey I have a US Amps MD2D that the remote wire screw on it happened to break off in the hole that you screw it into. I was wondering how would I go about replacing the power ground remote block for it and how much that would cost. The amp was bought from an authorized seller at the time around 2 and 1/2 years ago. Its a 2005/6 model.

So I finally got this beast of an amp. I looked at the user manual but have a question on wiring. I will be using four single 4Ohm subs. The way I understand the Manual I can wire two subs together to form a 2 ohm load and use one set of terminals on the amp and do the same with the other two subs for the other set of terminals and the amp will see a 2 ohm load? My head tells me the amp would see a 1 ohm load but the manual makes it sound like it would see a 2 ohm load. Can someone help? I would prefer to run at 2 ohms VS 1ohm but if needed will run at 4 ohms as to not destroy the subs I have. Subs can take 500-700 RMS.