Automotive and Performance

this is my car these are the options

I am looking for the actual name for Coil Knuckles I am interested in some for the rear of the mustang... is there an alternative to this so I can add more weight? That are easy and cheap*

Well.. Since Im 20 now, going to be moving out on my own within the next couple years, going to have a job, ect. Im thinking about selling my 04 Impala, and get something a little more fuel efficient, and to be honest Im thinking about maybe a 94-98 civic. I never would have thought id be buying a civic, but they are fairly inexpensive, easy to work on, and very fuel efficient. Not really asking for people to persuade me either way but if you want to put in your 2 cents go ahead. . Just thought id tell you a potential idea.

It's about time to replace my front pads on the Jeep and looks like I will need to replace my disks also. There's a company called Vanco which makes a big brake kit. 12" rotor vs 11" rotor stock and Explorer Sport-Trac calipers. I've looked around and it seems like I can use the Sport-trac rotor. Sport-trac calipers come in 2 different sizes, one has 2 48mm pistons, the other has 2 46mm pistons. Stock Jeep caliper has 1 66mm piston. Comparing the surface, 2 48mm pistons have more surface while the 2 46mm have a smaller surface. I can source the smaller Explorer caliper locally for a good price and then it would cost me disks + pads. Is the smaller caliper piston surface (…

I'll be uploading more videos as soon as the finish. The best ones are yet to come. This was 3/17/2012 Rats and Tats car show hosted by gulfport drag way. There will be pics as well.

Hey guys i'm in the market for a pair of new headlights/bulbs and was wondering what you guys thought about the headlights below? I was wondering if these would work with HID's? I'm looking at getting xentec hid's, my roomate has them and they look amazing for $32. These will be going on my 1999 dodge ram 1500 ext. cab. Please post what you think about these. All opinions would be appreciated. http://www.ebay.com/...984.m1423.l2649

I finally did it! I got a AD244 in my '97 Grand Prix with this bracket - http://store.alternatorparts.com/a500-cs130d-ad230-ad237-to-ad244-cs144-conversion-bracket.aspx I researched for a while now, had to shave a little off the alt., but it bolted up and plugged it in and works great. I would post pics but can't figure out how with the new layout. https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/423922_2522769080805_1600682969_3457785_1143037732_n.jpg

Hello, I have a simple question and was wondering if anybody has tried or seen this done before and thoughts on it. Its been on my mind ever since seeing it at my last job. This kind of cable is not nearly has flexible, I understand that part, but instead of smaller strands of threaded copper this kind of cableing is like, really think copper which is why I even ask. Since it is made up of thicker copper, then I would assume that it would be able to carry more current than normal cableing we see in most car audio applications. While upgrading my electrical, I was just wondering if this would be a logical move or should there be any reasons to steer away from it. My i…

My girlfriend is looking to buy a used car (around 2 grand), what should we look for? Are there any steps to prevent her from buying a lemon? I had suggested asking the seller to allow us to take it to a shop I trust (Family was in transmission business for sometime) Any other things? ANyone else feel free to chime in too.

I stopped at the store today and parked it and then came back and started it up, sounded fine, then put it into reverse and apply the gas a little. It acted as though it was stuttering. So I put it in drive and same thing, it stutters no matter how much I push the petal, it will not go above 5 mph or above about 1.5k rpm. As I got on the road I had to pull it over and troubleshoot because It was just to slow. If I had to describe what it felt like...It was the feeling of putting a manual car into 5th gear and trying to make it go from a stand still. Acts as though it's about to stall out but it never did. So first, I put it into park, turned off the truck, turned it back …

MOBS on www.GMT400.com hooked me up SSA ... Not done with the complete install, but this is what we have done so far ... I wanted blue ... but after consideration, Green worked out for me best ...

Looking for experience with C&D brand batteries. Specs look better than kinetic and on par or better than XS for the price. $350 for 135ah and advertised floating voltage of 13v plus. Or $245 for 100ah. Not sure what shipping costs are yet as I'm still mobile. I will be having my Mechman alternator shipped back to them for some diode adjustments to bring turn on rpm down to about 550 engine rpms. I believe I'll be rock solid with one group 31 or larger battery plus the kinetic hc1800 under the hood. I'm almost tempted to do 2 of the 100ah batteries and run some 2/0 wire straight from alternator to rear. Thoughts???

Hi everyone! I've been out of "the game" for a little while and figured I'd stop in and say hi and explain why! The red flaps and wheels are a winter setup, don't worry! Car put down 250hp on a Mustang Dyno, which is equivalent to 305hp on a Dyno Jet. MODS: Drivetrain: Kartboy Short Shifter Kartboy Front Shifter Bushings Kartboy Rear Shifter Bushings Kartboy Shift Knob TiC Shift Linkage Bushing TiC Lever Pivot Bushing TiC Tranny Crossmemeber Bushings Group N Transmission Mount Whiteline Steering Rack Bushings Exterior: Rally Armor UR Mud Flaps 17x8.5 GramLight 57c's 245/45/17 Hankook Ventus RS3 General Altimax Arctic (winter tires) LED License Plate Bulbs Muteki…

I'm only posting because I don't really have the time to really research myself. But I was looking into DDM Tuning and noticed people complaining how bad their customer service is, and the overall length of time its taking to receive your order and it seems its taking longer and longer. So to me, this usually isn't a good sign, definitely if I have a problem. So I'm looking for another brand or company that compares to DDM as far as price and quality(if you could call it that). I am willing to spend ~$75ish for each kit, 50watt low beam 9007 and H10 fog. Also, I don't have to have slim ballast's but it would be nice.

I just ordered these LED Switchbacks For my 01 Limited Edition. I'm hoping they will match my HID's perfectly and will look amazing. I have read you have to use these, LED Load Equalizers, so that you don't get the "Hyper blink". So I picked up a pair of those as well. I'll post fill review, with video soon as I get them and my new HID Fog lights in.

hey yall i got a Kenwood Kdc-Bt945u and im trying to find a replacement part for it. on the face plate where it says kenwood that knob came off and i cant find it. so now it is just hollow there. it still turns and everything but when i have to push it in to select something its kinda of tough to get my finger in there to push it. so im wondering where i could find just the knob or would i have to get a whole new face plate. heres a pic of it. the inner knob where it says kenwood is gone.

i have a viper kit on my s10 and when i use the remote start its like my truck wont shift gears like its stuck in either 1st or 4th i cant figure out why it does it. and when i lock it it always says door open

Yes, I know CarFax only shows so much, but if anyone has the ability to back check a vin # for historical records, that would be great. Please tell me and I will pm the vin #.

i have a 48mm over drive pulley now.. i would like to install a 44 mill .. does anyone have any reasons why a 44 mill would not be good for daily? IE. on the hwy it will spin to fast for too long creating ... yada yada yada. if no issues are known then ill order it thanks guys.

Hello, I have a 88 ford bronco 2 w/ a 2.9 v6, Woundering if anyone knows what alt. bracket i need to find to run a 2nd alt. where my a/c pump use to be. Have looked all over the web an cant find any info on the mod. If anyone has ever done this or knows were a better place to look for the info pls help me out. thanks D

Hey everyone, I'd like to know if there is an alternative to changing the color of my headlight without HIDs. I'm not a fan of HIDs because they tend to hurt my eyes when I see people driving so I wouldn't want to do that to others. But what I do want is to not have the stock "yellowish" light and have a different color like blue, white, etc. What's a good alternative that isn't so expensive?

Like this much better than the K&N CAI, everyone needs one. Especially with the added weight of audio equipment. I'll have to shoot some better looking final photos sometime.

so after months of looking for someone who can build an alternator for me with out breaking the bank, i found a man that will work with me. my car comes stock with a 4G alternator. a very small case that leave me sad every time. the man said he can build me a 6G,. its a larger case, with the same bolt up, it has dual fans for cooling, and an under drive pully, and he will send me the pig tail swap to make it pair up with my car, he said its just 2 wires, cut the old ones off wire the new plug up and BAM 240 amps at 1200 RPM, with a 1 year warranty. for right at 200 bucks shipped. now while talking to this man on the phone for a half hour, he got to talking and was …

Looking for a remote car starter for my 2000 chevy s10 work truck. Just the starter nothing with an alarm as the s10 doesn't have power windows or power locks or alarm I have looked at the Clifford 4203X but they don't come with install instructions as clifford says that you have to take it to their dealer to get it installed. I want something simple that i can install myself

i have a 1995 ford ranger ext cab 4.0 v6. has 150xxx HARD miles on here. this noise had occured before about 8 months ago ten stopped. havent heard it since. they yesterday, it started again. it sounds like a supercharger and only does it when the truck is cold... any thoughts????