Sundown Audio

Hey everyone!! We say it time and time again. And I am going to say it again and again!!! Jacob gives the best customer service I have every received from a car audio company, hands down!!!! I called his phone this saturday, and expecting his voice mail, HE ANSWERED THE PHONE!!!! On a Saturday, DAMN!! Keep it up Jacob, you will be pulling people from other companies when they see the costumer service you are giving along with, not a good product but a GREAT product!!! Team Man-Up (Ray) via Team Sundown 90 CRX dbdrag Certified 154.1 dbs and still climbing. 2 DD 9910's 2 Goliaths XX-5000 (until My other 2 Sundown 3000ds arrive)

What is the best way of purchasing a SAZ-1500d?

The SD-1 v.2 protos are in... they take everything the SD-1 was good at and take it up a notch. 1) They are even shallower at only 4.5" mounting depth (10" model). 2) They have more linear x-max. 3) They have a 2.5" voice coil so they will handle twice as much power thermally. 4) They maintain the efficiency of the original SD-1. 5) They maintain the small box requirements of the original SD-1. 6) They maintain the low-end performance of the original SD-1. 7) They are now DVC 4 ohm for more wiring options. 8) They now have a rubber mounting gasket. These subs will throw down in very small enclosures and will now handle much more power. Ideal for shallow truck enclosures! …

Has anyone mounted their Sundown amps upside down? If so, were there any issues with heat?

Is it possible to switch the casing around o the amp, so the RCAs are on the left side? Also Jacob I need two speakers screws for a 100.4 please

ok here it is i have a goliath that im sick of! allways at the shop. i have 2 15 FI audio fully loaded bl's with the daily option the box is 6 cubic ft vented at 33hrz 0.70 ohms at the amp a 200 amp alt, 3 yellow tops and 0 gauge althe way around the way i see it is i can get a 1500 watt.. and it should push these subs well,,, and if not.. ill buy a second 1500, and strap them to get more power, or i can get a 3000 watt.. and be in the same boat as i am now, relying on the one amp, and then if it breaks i got nothing until the repair is done but will the 1500 indeed push these subs alone, just one?…

i have 2 fi d1 bl 18's and i was wonderin if it would be better to run 1 saz 3000d or to strap a pair of sundown 1500's?

Jacob I was wondering do you plan on coming out with a larger SAZ model anytime in the near future? I am strongly considering buying 2 more SAZ-3000D's, but if you are planning on coming out with maybe a SAZ-6000D I may hold off for a while.

Wish me luck. I have been so busy at work this week that I just started rebuilding last night. Still got to hook up my amps and batteries then its time to test. I have 9 people in my M2 class and 5 in my DB2 class. If the build comes out as good as I hope I should be bringing home a couple of six ft trophies.

Hi guys, My name is Donovan and I

Has anyone actualyl done power testing on the 100.4? I really want 125 watts x 4 rms but I really want a sundown amp so just curious what the 100.4 really puts out? Thanks

got my second amp today. woohoo! i took out he current amp pushing the XXX and will be running this one in the mean time in case if any problems come up while in warranty. since my next set-up will not take place till Feb-March it's better to test now then later.. anyways thanks much for the amp. it looks great and works just fine! now all i need is a new alt and tons of tons of sound deadener. off to watch ATHF movie and have some yellow rice and black beans.. woot!

ive got 4 12's that handle 1500 watts max a piece and a box being build to spec.i was wondering if a 1500d would b enough for as3 next year at competition.i am planning on getting a second one the year after and strapping them.im using 0 guage wire and a 100 amp fuse.ive got a factory alt. w a decka intimadator batt. under the hood.will that be enough power and can i run them at.50 oms.?im doing the 4 12's cause i just wanna upgrade amps and batts. the following year.please give me some feed back.i would greatly appreciate it..

Hey all, getting ready to install a 3000 I picked up (will install in about a month) in my 07 f150. I have a yellowtop g34 up front, was planning on running 1 deka intimidator outback and upgrading the alt to a 200amp powermaster. Would this suffice for daily driving or should I look into a 2nd intimidator? Will never be played with the truck off. Reason I'm going with the intimidator and not the powermaster batts is I'm cheap and they look good for the money. Last, does powermaster have a dealer network, or if I'm lookin for an alt do I need to go directly to powermaster? thanks! -bud

I have 2 1500d's, only one is in my car right now. I have an AA havoc 18d2 in the car as well. I am looking to add another 18 soon. My question is: will I get more efficency and power with both amps running seperately at 1 ohm a piece or running strapped at 2 ohms? I have factory electrical(110amp alt) for now, will be upgrading it soon as well. I just want to run the 2 18's without destroying anything in my car. Any help would be appreciated.

So the 1000 is rated at 1000W @ 14.4 volts. What kind of numbers are we looking at closer to voltages on stock electrical, say 13V? Would two 1000d's be content on an 100A alt, with the big 3, and a battery in the rear? Also, one amp does 1000W, but two strapped does 1800. Why is this? And one more question... would a 1000d on a Fi SSD 12" wang awesomely? Thanks! -Trevor

The old thread got cluttered and I think people thought I was out and forgot and left the thread pinned So, I started a brand new fresh thread... the blowout sale is still going on. ----- The SD-1 model is being closed out and discontinued due to sluggish sales. They will still carry full warranty as I will hold onto some of them for warranty replacements: http://www.sundownaudio.com/ppsd10.html -- 10" Model Information http://www.sundownaudio.com/ppsd12.html -- 12" Model Information These subs perform very well... see some first hand reviews here: http://www.soundsolutionsaudio.com/forum/i...?showtopic=9883 http://www.soundsolutionsaudio.com/forum/i...?showtopic=9264 --…

I ended up getting this sub off Jake and I'm so glad I did. Here's a link to CA.com http://www.caraudio.com/forum/showthread.php?t=268616 I'm considering trying out DB drag or something in the spring. Not only is it loud but it sounds pretty good for an SPL sub (much better that a DMX 15 IMO) Anyway, I'll have some pics of my trunk up once I clean up the wiring.

hi i was just wonder what the differences are cause i have the prototype..does the final product gives out more power etc..thanks

I think this will be my last try to get some information. So you folks are my last hope to help or point me in a different direction. Here is my question. If I want to build a box of X cubic feet and there is not enough space where I want to build, can I build another box and have the two boxes attached by pipe or tube or sealed passage way etc.. Example: I would like to build a box in the right rear most corner of my trunk but there is only 1.5 cubic feet of space available if I build the box, and my sub needs 3 cubic feet. But if I built a mirror replica of the enclosure and installed it on the left rear most corner of my trunk and connected them by... I don't know, let…

How well would these perform in a HT setup? Thinkin about 2 12s off 500watts. How do they compare to Fi SSds?

ok so i'm about ready to buy my amps. i will have 4 15" fully loaded 1 ohm btl's in about 16 cubes tuned to 32hz. but before i buy the amps...can a 3000d handle a pair of fully loaded btl's @ 1ohm? only time it will get turned up loud will be for competition burps. maybe to turn up for demos for friends . other than that it'll be regular volume, so nothing strenuous. i have a 200 amp H/O alt atm, couple extra batteries (will upgrade to some kinetiks in the future), and i'm getting a solid 14.3/14.4 volts. i may try to add another alt if money allows. also...would bass race be out of the question with this setup? to prevent burning up the amps? i'm kinda going out on a l…

i only have one sub which is RE SE d4... according to the picture i will have to connect both the positive to the box. and only one to the negative. so from box... it's one + and one -... and from amp it's + - - + So i would connect all both + on the amp and then connect it to the sub. and only one to the negative?

At this time these are just known as the "X10 and X12" speakers. The photos are of the first prototypes. I am already working on revising the prototypes with several important improvements. These are geared towards "daily beating" and are made to be used as a pair with either an SAE-1000D or SAZ-1500D. Sound quality is good, but output at moderate power levels is the number one goal. * Basket with extremely long clearances. The motor also has enough clearance to travel over 33mm rearward before bottoming out, this is well beyond linear coil travel limits. * Vented pole and vented gap for increased power handling. * The cone is a fiberglass weave with paper composite ba…