Sundown Audio

I got a sundown saz-1000d in trade.since dont have any subs yet i unhook my four channel amp to see if the amp worked. when i turn my radio on the fuses pop.i only hook up the power and ground the remote wire and the rca up.i was thinking it could be doing this because im using 8ga wire and i have a 80 amp fuse under the hood. when i hook my four channel amp back up to the same wires it works just fine. i went to the part store and to get my fuses and everyone pop on me.i replace the fuse with 25 amp fuses.what could be causing my fuses to pop?

Hey, just seeing if it would be ok to have your logo etched into plexi for my trunk.

Was caught up for a short time but they are backing up again - have been pulled away to build alot of subs recently... Nightshade v.2 orders are coming in quick. In any event - be patient if you have emailed me and I'll get back to you as soon as I can.

I figured Jacob could drop a bit of info here on the upcoming SA18 that is due to be released sometime in Oct. per fb. I'm personally interested in these as one of my choices for a upcoming build.

I have a set of cdt 6 and half with upstage located in my doors and a pillars. They have an rms of 400. I have a 4.100 and would like to use it for them. It would be 320x2. I think I can run it bridged stereo with y adapters on the rca. My question is how do I set it up so that both channels are doing the same thing. The panel is a bit confusing to me. If I have both channels on high pass, what abou all the other controls?

I've been kinda rethinking the whole larger setup that I had planned. Would a SAX-100.4 be suited to two AQ SD2.5-15s in a horn? AudioQue SD2.5 series The subs are D4. I'm still waiting on a shipping quote from AQ..

hi all i have a sax 100.4 and a saz1500d ... i want to change my install a bit ... do something a bit more visually appealing now in the pics below ud see one of the amps " floating " in the center ... i want to do a symmetrical pair like that the lower board will have a small fan and it will have gaps in the board exposing the heatsink a bit so now my questions 1 : has anyone ever installed their sundown amps in an area with minimal ventilation and did it have any issues ? 2 : do you think the setup will have adequate cooling ? 3 : what improvements do u think i can make?

How well would these perform in a HT setup? Thinkin about 2 12s off 500watts. How do they compare to Fi SSds?

i will be running 4 1500ds and 2 100.4s in my next project on 4 12 nightshades... powermaster now makes 350 amp alts and i was also gonna run 4 dekas out back and 1 up front... would i be fine?

hy i build a enclousere for my sa8 ( second model v1) it has 36 liters and a 16 cm aeroport which is 40 cm long. the tuning ist around 60 hz for db drag. i thought it woud play a bit deep ( 40 hz ) in this box but nothing , its loud but i dont want to hear lmfao ( thats the only music its play loud) . 40 hz and lower nothing goes . now i want build a music box , tuning around 35 hz . some infos for port and box volume ? want back to jezzy and trae , thats my stuff , please help

I thought I saw some where that there was a carbon fibre cone and dust cap on the SA-8v2. Was this a one off that I saw? Or was it on something else? Also are there dust cap options for no insignia? Sorry if this is posted some where else but I could not find it. I do believe there is a CF dust cap option but I would prefer to have the whole cone and dust cap of possible. Or at least a blank dust cap that matches the cone. Again thanks to anyones help.

Hello, I am looking at a 100.4 to run my entire system with CH1/2 running a full range component set and Ch3/4 bridged to a subwoofer. I see in the owners manual that the HPF is a 12db filter but coundn't see what the subsonic is. My primary question is that since there is some overlap in these two filters if I wanted to filter out the fronts at say 60 hz is there a reason to pick one or the other to use or to use a combination of the two? Thanks John

Ok, i've been doing some research about these drivers and my question is: Are these daily woofers? If so what tuning frequency do they like? I am wanting something on the LSQ side but need 2k rms daily powerhandling and low frequency extension ability. I want to tune around 28hz. Does this driver fit the bill? Thanks.

im fixing to wire up my 1500D to one sub, how do i go about doing it, just use one + and one -?

Well UPS finally came and dropped off my new baby in one piece...I must say, this sub is a monster. It looks like it could just devour my old type argghs! So I almost got the build complete, just gotta finish up my box and I'm good to go...had to wait on my ports which I also got today as well. I guess you can say it was a good day though. Thanks Jacob for the beefy a$$ sub, I LIKE!

i see on the 1000D thread that sundown is working on some more amps like the 75.2 250.2 50.4 any clue on the timeline for those ? release dates and such? subs aswell i think im not the only one interested in those:D Eli.

Thanks for the great amps. I finally put the amps I ordered from you in my ride and they work great just wanted to say thanks for a great product.

Haven't been able to find this anywhere... anyone know?

I have a blown 100.2 from Florida. Only has UPS store address and no paperwork at all. Need some information on who sent this to me. ALWAYS put some sort of documentation inside of a return.

bought a 3000d thursday, hooked it up and its an absolute beast. cant wait to get my second one, 2 100.2s and 100.4 when funds allow me to lol. one thing though, i did PM you jake, is that the screw for one of the negative speaker inputs, the head on the screw just cracked off. i tightened it down the same as the power/ground/remote, not over doing it, and those were fine. maybe just a crappy made screw

Hi, I decided to buy a Nightshade... But I don't know if this thing fits my car So I need to know what's the minimun enclosure size and tunning for a single NS 15" D2 paired with Rockford Fosgate T1500-1BD 1.5k @ 1ohm

im wanting to purchase a phase linear uv8 flip out dvd player for my car.ive got 4 12's and a 1500d.im installing 2 batterys and waitn to install a altenator.ive had a problem i cant figure out w my alpine head unit and was going to get this one cause a few of my friends have one and it looks great and sounds good and is a great price right now.does anyone know about these head units and are they ok w alot of power.im eventually going to do 2 1500d's.thanks !!!!!!!!

jus wondering if this setup is ok... i have 2 10" rockford fosgate punch hx2... in a ported box... the amp i jus bought was sundown audio sae-1000d...this is my first time that i heard of that amp.. so i jus got it since i was looking for one amp.. i had a choice of this amp or a rf t10001bd.. but i got this amp for 235 and if i got the rf amp.. it would be 350.. so i save a lil.. does anyone know how to setup gain and subsonic and stuffs.. thanks in advanc.. btw is there a difference if the rf amp is heaver then the sa amp

Vehicle: 1992 Ford Festiva System setup: 2 layers of peel and seal on the roof, hatch and entire cargo area from bpillars back... 160 amp ohio gen alternator, 950cca optima red top up front, xs 450cca in the rear... big 3 with accel 2 guage power and grounds....head unit - jvc-kd-avx2.... amplifier - atomic 1000.1....american bass 4" coax (front and rear).... subs - 2 sundown sa8d2 version1.5's Space to work with in hatch area:: 35" wide 12"deep 16"high material: 1" NOVA PLY goal: MECA Street 1/ 142-145 @ the headrest Car peaks out at 50 hz with mic on passenger seat, drivers door open, passenger door closed, woofer on passenger side, port on driver side, woofers and port…