Sundown Audio

Does anyone know if they will begin making these again? I would love one for my 2 15" Fi SSD's but I'm only buying the amp new and it's discontinued.

I miss calculated on my port and I am tuned to 29Hz instead of 32Hz. My box is ~5.3 cubes after displacements, I have 20.5'' of port (13.5'' in the box and 7'' out). I am going to cut the port down at the top. Will I notice an audiable change? I mostly play decafs chopped/screwed songs and I dont think they dip under 30hz, if they do its only breifly. Is 29 too low for a nightshade? Its ran off an AQ2200 @ 1 ohm

Are here ill show my little setup, its a single audioque hdc3 15 running half an ohm on a sundown 1500d. box is a t-line built by rich. and as u can see i stated my camera wont pick up flex, its loud though.

Hi guys I was wondering, does this sub have only one type/version that you (Sundown) sell, or are their options for the sub itself that can be upgrade, changed etc. ?? I know the Fi BTL has loaded options and things like that. Also other subs can be ordered with copper or aluminum coils. But is there only one type made in an 18" size that is sold without less/added features ?

Is there an easy way to make one of the wired remotes into a master volume control for all of my 100.2s? My HU doesn't have a knob. I like knobs.

Just wanted to say thanks to Jacob for this B Stock 15" Nightshade. Came in about 1 day, and UPS managed to get it here in one piece(which isnt always the case). Its def one of the larger drivers i have seen 1st hand. It'll be going in a box slightly under 4cuft tuned to 40hz for spl off a SAZ 1500D. Ill follow up with a review in the following days. Here are a couple pics i took right out of the box. Again thanks Jacob.

Sundown E-10/12/15 and SA-10 D4 Back In Stock Just finished unloading and sorting the container. So they are ready for order once again. Re-cone parts for the E series also arrived so I will work up pricing for kits soon. I have heard very minimal need for the parts but I'm sure they are a small handful out there somewhere.

I have the original motors and I wanted to know a few things about these puppies. 1) Are the new motors deeper (or any different at all?) allowing the coil more travel or are they close to the original E8, as I've bottomed these out and cause several mechanical failures (I will take this into consideration when I build my next box, 8-16 will be powered by a single 3000D, re-enforce the spiders, ect., design the box to prevent bottoming out, i always set subsonic, but love low extension and will likely be tuning low) 2) The spiders are wider, about all I know, are they stiffer? 3) Is the surround built to handle more travel, is it stiffer? 4) If you happen to have the spec…

Will they run on a 16 volt setup? I know that there would be no warranty but have to ask.

Want to know how 2 12" Nightshade would do in 2.742 cubes and on a Sound Stream xxx-6500d at 1 ohms?? I was worried about the box being to big I am only about a 1/4 to 1/2 up on gain right now on two Mass Destruction Napalm's and they sound good but are really made for a smaller box.. Also how much are the 12" version did not see it on the site or missed it.

Does anybody know where I can find a 200.4?

i have been wondering why there is no iinformation on www.sundownaudio.com about the SAE-1000D? is it old? or do you guys just not make them any more? i bought mine off db-r.com a couple months ago.. so the only chance i would have of finding another SAE-1000D is if i buy it from another person?

Termlab 136.7 @ 55hz on the glass sealed 144.2 @ 34hz at the kick driver door open 158.9 @ 26hz at port All in all =

i am going to be running 2 12" Q's w/ bp power off of a sundown 2000 that i have preordered. i also plan on ordering a 100.4 sundown amp also for my 6.5" and 6x9's. i was looking at the knukonceptz dual amp 0 gauge wiring kit. what size inline fuse would i want and also the 2 fuses on the distribution block? also for the rca cables there are options for 4ch and 2ch. i am not sure of what i would need exactly. sorry for all the questions, i just want to try to get everything right the first time. thank you in advance.

I know there not out but do you think 4 of the sa-8 could get louder than two 12"inch woofers.Both would be running off saz 2000?Its just hard to believe 8s can get that loud,but man that would be badass.how big would a box half to be for 6 ofthem ported?

like the title says im interested in the SAX 50.2 i believe u working on some protos at one point. just wondering how these are coming along.

Hi guys if i buy a sundown 3000d is the warrenty transferable?I know this guy and he have 4 of them and he states that they have a 2 year warrenty on them.

Hey all I currently have an SUV and the rear fill speakers which are Morel Tempo 6's have messed up x-overs. I've tried to call morel and it wasnt a help, I called local dealers and they werent a help either, it turns out I would have to buy a new set and I cant do that right now. So I was wondering if somebody can help me figure something out, should I just hook the mids and tweets up to the SAX directly and adjust things from the amp? you know x-over settings? I wouldnt really know what to set them at. My Headunit is a Kenwood DDX712 if that will help. Thanks

I bought a used 1500D and it didn't come with a knob. Anyone have one latin around? thanks.

I see that it says 160x4 at 2 ohms. This might be stupid question, but i havent ever had any 2 ohm speakers, but the RE XXX comps are 2 ohm. Can 2 channels run 2 ohm and the other 2 run 4 ohm? Or should i run 2 sets of xxx components? thanks for help before i order

Anyone have box design for 2 sa-12's per Sundowns specs......ported. I'm new to this. Hoping to build the box myself.

I have 2 sd1v2 10", not sure how to connect the wires on this diagram above. Do I solder, crimp, or something? It shows to hook a wire + to + and -to- but do I have to put two wires in one sub terminal? http://www.jbl.com/car/product_support/Sub...aspx?type=2-4-1

im wanting to purchase a phase linear uv8 flip out dvd player for my car.ive got 4 12's and a 1500d.im installing 2 batterys and waitn to install a altenator.ive had a problem i cant figure out w my alpine head unit and was going to get this one cause a few of my friends have one and it looks great and sounds good and is a great price right now.does anyone know about these head units and are they ok w alot of power.im eventually going to do 2 1500d's.thanks !!!!!!!!

ok, i read the tutorial on strapping 2 saz-1500ds, and know about the other wiring and to use the br out on master to br in on slave. I am ordering my other 1500d next monday, and was wondering what rca's people use for the br in and out. Its just a single rca, and i have looked around several local places and they have nothing. Could i just buy some cheap rca's and seperate them? Thanks

I purchased 4 saz1500 amps. I have not purchased my subs yet. Would it be better to run an amp to each sub individually or link 2 amps together and run them to 2 subs each? I planned on buying a mlx-100 so signal loss will not be a problem.