Sundown Audio

Hey Jacob what were the recomended box sizes both sealed and ported for these subs and the recomended tuning that and the cutout diameter Im about ready to build a box for them for my regular cab Silverado its for a pair of them

I am picking up 3 SA8 motors and would like get some baskets and recones for them. I'm wondering what my options are, since I've seen v1 and v1.5. I'll be running these off an saz-1500d in a town car with a 240 amp alt, deka starting battery, deka 9a31 in the trunk, big 3, 1/0 wiring throughout etc... I want to wire these to .66 and want to know how big of a box I should go with and how much port area I need. This will be a daily driver, and will be turned down most of the time. I was thinking 2 cu ft net tuned to 34 with 30-35 sq in of port area. I looked in another thread and the recones were listed as $32 and baskets were $10, let me know if those prices are still goo…

Specs where provided from an old friend whos been doing SPL and bandpasses for a long time, just wanted to see some other sundown people input, maybe sean will poke his head in here. The specs I was given was 5.7cuft 1:1 50sqin of port area 8" long. After the suggested BP design I "tried" to mock one up in sketch up. I probably got this all wrong but here is a picture of it with some area's left out to view the measurements. I shortened the port based on 1 shared wall, the way I got the length of the port of 5.25" is that I calculated the box like a standard ported box with torres calc at 50sqin 8" long, got the resulted tuning, then changed it to 1 shared wall, accountin…

Designed a slot ported box that will hold 2 E8s. I was told by a few people that my design didn't work because the tuning was lower than the FS # of the sub. Subwoofer Size: 8 inches # of Subwoofers: 2 Cutout Diameter: 7.25 inches Mounting Depth: 4.5625 inches Enclosure Details Port Type: Slot Port Port Tuning: 35 Hz Port Dimensions: 9.25 x 1.625 inches (Height x Width) (port length is not displayed) Port area: 15.03125 square inches Number of Ports: 1 Net Internal Volume: 1.1 cubic feet Port Volume: 0.3123 cubic feet (includes displacement of port materials) Subwoofer Displacement: 0.0500 cubic feet per subwoofer Total Internal Volume: 1.5123 cubic feet Front Baffl…

I'll be headed out at 3:30 AM to start my CES / west coast trip. See you guys on the 14th when I get back. All of the rest of the crew will be at work until Tuesday evening; when a few of the other guys will join me from then for the rest of the week. They will be back on the 12th. Some of the crew will be at the shop the entire time, of course, we will not be closed completely.

Can we expect the Nightshade to be similar to a BTL? Meaning they will excel in the same application?

Like the title says, I'm mainly curious about the SAX100.2, but also the 100.4. When can we expect availability?

Looking at purchasing two of the e8v2d4 for a 2dr cavalier. Pete from pwkdesigns will be making the box, hopefully. This is for daily bumping. How much power can I give them?

hi all can i use the remote gain on my 100.4 to attenuate MY MIDS off channel 3 and 4 ? reason i ask is because i was looking at other remote gains and saw that frequency was a factor in how those work so i just want to be sure

I haven't been able to find a good post detailing the differences and improvements between the V1 and V1.5 SA8. If Jacob or someone else that knows could post up I'd appreciate it. Also is the motor the same on all SA8 v1/v1.5? I've seen two different basket styles. Can they be run together? I'm getting some old SA8 v1 motors and need some info. I've emailed Jacob as well, so if I get info from him I'll post it here.

What is the air displacement on the SA-8. I'm trying to account for it in a .5 cube box....

i'm thinkin about getting a SAZ-1500D i need to know is the wired remote on sundown amps for bass boost or gain, hopefully gain..thanks in advance

About how much power with 2 1500d's strapped at 2ohms put out?

Box outer dimensions (.75 mdf) - 40" x 13.75" x 8.5" = 1.91 cubes After subs, ports and bracing = 1.65 cubes Box will house four E8's firing up. I have 10' of 2" pvc so I'd like to use it since it's free. Will two 2" ports 8.56" long tuned to 34hz give me good output? Also I have a choice of firing the ports down or to either the driver or passenger side, do not have room to fire up with subs. Give me your thoughts please on this design. Power comes from a Sundown SAE-1200D = 1200 watts @ 1 ohm @ 12.8 volts. Box will be behind the seats, raised off the floor, in a small MR2 with about 30 - 35 cubic feet of interior volume.

on a dual 2 ohm sub, what wattage would i see with a 4 ohm load at the amps..... would it be 1600 watts.... 2 ohms per amp..... i know, a little unpractical..... just temporary , sorta just curious.... oh, sorry , two sundown audio saz1500d amps. thanks for your time! chop

Originally posted by Greg Kashin : http://www.caraudioc...ponent-set.html ---------- Ok, we got our comps in a few weeks ago, and were immidietly super impressed with the build quality and finish on these things - really a great set! So the initial listening impression was from an SQL-type install in a Toyota Landcruiser two sets on a Sundown SAX125.2 with a couple of SA10's sealed in the back for bass testing material was comprised of some random rock, blues and vairous club track that the owner of the car normally listens to as well as an SQ competition CD from the AMT Russian Challenge format the mid-range capabilities of the set inpressed us - well over…

hi, I ask Jacob, or someone else, if you can get all the parameters T / S of midrange NeoPro 8 and 10" measures of the coil, size of the ideal box, etc. etc. you can have this information? customers are calling thanks

I was just wondering I notice a lot of direct sales here on the forum and on alot of other forums with great prices. But my question is does this not cut the throat of the dealers by selling direct to consumers and even the ones who go to a retailer to purchase it just seems to be taking money out of the dealers pockets. There is nothing wrong with selling direct but I would just think you are either a direct online manufacturer of a dealer based company?

Sundown Audio Shirts Available Available in the following sizes / pricing: Shipped prices in continental 48 states. Small -- $15 shipped Medium -- $16 shipped Large -- $16 shipped XL -- $18 shipped 2XL -- $20 shipped 3XL -- $21 shipped 4XL -- $22 shipped 5XL - $25 shipped Paypal to [email protected] Newer thread... old one got huge.

Alright Jake get back to work. Do what you can with the help you got. Bout time for some mex.

I hope this isn't a stupid question. A friend of mine has the SAE-1000D and wants to run it at 2 ohms to power his pair of JL Audio W3v3 13.5s with 600 watts until he has the money to get the electrical upgrades he needs for his car. He bought the amp so he could expand his system when ready. Right now he has a Batcap 800. He eventually wants to get a bigger alternator and 2 good drycell batteries in place of the Batcap and a 2nd SAE-1000D and 2 Icon 15s, but for the time being just wants to use his JLs. How should he treat his gain for the JLs being the amp is going to be ran at 2ohms rather than the amps max at 1ohms?

I am looking for some cool designs with Sundown Audio logo for a t-shirt. I've seen one before, it was with some amp guts in the back ground and the logo in the foreground. If someone can post that in good quality so I can give it for a print out, it will be great. Also looking for other ideas. I am going to make a white tee, so something that will look good in white back ground... but, just post whatever you got.

i told him to order it before the end of june. he really liked the way it pushed my type r's. also when i bought my amp from chad (lilmaniac2 at roe.com) i didn't get the stickers that you send out normally with the amp. how much would you charge shipped to 62025 for the 2 stickers?

I see that the 1500D have 2 sets of speaker outputs. So the easiest way is to get dual 2 ohm, hook it up in parallel, then the internal are bridge for a final 1 ohm load. What if I were to go with dual 1 ohm (1 sub) wire it in series = 2 ohm, then bridge the connection to the amp, will i get a final load of 1 ohm? I can't tell from the manual if the external outputs are bridgeable. Please confirm. Thanks!

Originally posted by Skip01 on CACO : 9/10/10 ---------- SA-12 2 SAZ2500s @ 1ohm strapped 2.2cu @ 40hz 148.5 legal @ 46hz 150.4 sealed Kick @ 46hz Bout it.....Thanks Jacob UPDATE...9/20: Closing in on 149 LEGAL with 1 600w 12" sub....still need too do some box mods