Sundown Audio

Had a good time at the USACI show today in Tyler had some really nice rides and set ups here are some pictures. And My Truck SB4 - 151.4 1st run and 153.6 2nd run with port plug in tuned to 36 hz

Figured I would update since I haven't been on in a while. The 1998 Explorer that has 4 DD 9515D2 and 2 Sundown SAZ3000-D won a USACi World Championship in SB4 with a score of 156.5.

http://search.ebay.com/_W0QQsassZsundownz Freshly listed: 4x 1500Ds (used) -- buy it now $400 + shipping or try bidding starting at $350 1x SAX-1004 (refurbished) -- buy it now for $275 + shipping or try bidding starting at $225 Thought I would give the forum a heads up on the new listings Just put them up a few minutes ago. All five of the above will come with a 1-year warranty. (They may take a few minutes to show up if you are looking at this immediately after my posting it)

This thread will be the official "cleaning house" thread to move all used, b-stock, and refurbished amps as well as any other misc items for sale here at Sundown Audio. TO ORDER E-Mail me at [email protected] to confirm which items you want then Paypal me. THIS POST STAYS UPDATED regardless of original post date. ---------- ALL USED SUNDOWN AMPS HAVE 1-YEAR WARRANTY USED OTHER BRAND AMPS HAVE NO WARRANTY PENDING UPDATES. -------------------

Here are some vids of my nightshade 18". I have a autotek mm4000.1 now(videos are with ap3000). Im wired @ 2ohms, after rise it see's 6 ohms, with 2400 watts. I did 150.7@42hertz, at the headrest. This was done at meca world finals. Comments appreciated, just wanting to see what people think. And here's a tiny hairtrick, not bad for a single sub.

Vaperz Southern Slam was a blast!! Here are the numbers the Team put up at the show. Only 2 of us went the other went to HOT IMPORT NIGHT'S the night before. I was demoing the truck and lost 4 sub's. That still didn't stop me from showing. So here's the numbers.. ROBERT WYATT ModeX + 1st place SQ SQ Phat Truck SQ Phat Install SPL-- Radical X2- 1st place 150.6 Drive-by --- Db5- 1st place 125.5 Most Improved SPL Best of Show Drive-By Best of Show Over All Best of Best of Show TODD MAYTON SPL--AS3 1st place 145.5 Drive-by--Db3-1st place 121.0 second highest score of the day SPL Phat Install All in all the Show was fun even with GIRL'S in the BIKIN…

WELL NOT REALLY! I just got my new toys in the mail and these sub are bigger than what i expected now all i have to do now is come up with a design...thanks Jacob Saz-3500D Sundown Z v.2 15's THANKS AGAIN JACOB! B.Ellis

I received my refurbished sae-1000d yesterday. I actually looks really nice. The picure here showed a couple of little marks on the cover, but they are hardly noticable. Hooked it up at 2ohms and wow! I was very impressed with it. The specs say that it does 600rms at that resistance but it definately puts out more than my "900rms" kenwood. Alot cleaner sounding too. I was having a really hard time setting gains last night too. I think i need to find someone with an o-scope. Just though I would compliment Sundown for working with me on getting my amp and, though I don't know very much about car audio, I was really impressed with it.

i got everything hooked up yesterday. 2 strapped 1500s on 2 bl loaded 18's. Camera is charging, will post pics later and maybe a couple videos. I liked how the 1 1500d made my bl 12 sound, but it sounds awesome with 2 strapped. May change to 2 3000d's later,

2 days ago i replaced that old, OLD pioneer head unit with a clarion flip out(vrx765vd) but im unsure as to where i put my amp rca's, i mean it has like 4 pairs on the back of the head unit.....right now i have it on "non-fader output terminal" should it be on "rear audio output terminal"? it also has "front audio output terminal" which i didnt use for obvious reasons.......sorry for the newbish question....but this was my 1st reciever install!!!!! oh, and the box in the vid was a first too....got anxious so i didnt sand/paint/carpet anything but honestly i kinda like the "raw" look.....besides the glue smear lol also another question, if i may.......do you think interna…

What's Up Guys. Here is a vid of my Single Sundown Audio Nightshade in my Suv. Enjoy.

at a local show. pretty good number with 4 1500's on 6 IA DR 12's. would of done a better number if i didn't start later in the song like i did. the end had a pause in it for about a sec and it wasnt a consistant note which dropped it more.

My Buddy, Kelly, aka (The Rattrodder) finally uploaded the video he took of the Kia demo yesterday at his new shop. Affordable Audio Solutions in Dillon SC. Enjoy. http://www.youtube.com/watch?v=Z3Oyw1g9XHI&feature=feedu

So system consists of: 2 saz-3000Ds 2 Custom Nightshade 18s Kinetik HC3800 Kinetik HC2400 80 feet of Kicker Hyerflex 1/0 149.9 bass race all day @ 34Hz

http://www.youtube.com/watch?v=YhCUZCG8l5w http://vids.myspace.com/index.cfm?fuseacti...ideoid=54115137

i am trying to find a couple of voice coils that will fit my needs. either dual4 or daul2 ohms. 3 inch of course. and it needs to be able to soak up about 2000rms it is for a custom 3hp that has an extra half inch of magnet, and a gap that is machined a little larger than normal the sub is being built for daily use, i am trying to make it a low end beast, and 2000rms will be it's limit, because of the suspension i am using will only handle around 2000rms. i have the measurements in case that helps. top plate to bottoming out is 4.166" outer diameter of gap is 3.455" inner diameter of gap is 2.934" if you can help me i need two of them. the goal is to hav…

I want to know how do they get 66 Voltage in a car. I mean I am going to get a 300 amp alt, and two power master D3100, and a SAZ-3000D. How in the world can I find out how much Voltage am I going to give out before I purchase all these things. Also how is it possible to put the amp at .5 ohms? I don't know a lot about car audio, but this voltage thing is REALLY confusing me.

what kind of drop should i be seeing from a pair of strapped 1500's @ 1 ohm for a burp? I'm using a nsb-90 with the car off. it goes from 13.8- low 11's. is this right? i'm going to start and run my car in the morning and see what the drop is!

when i was running my btl 15 off this same elec. i never got voltage issues this low(12.8 and under)... i just installed 2 ns 12s at 2 ohms strapped and i am getting the issue, gain at a quarter and volume at half... i have a ohio gen 180/225 ho alt sittin here and will be dropping it in... i also did NOT do a big 3 yet, but the factory wire is 2 runs of 8, will be upgrading to all 0guage soon. with all this accomplished should my voltage maintain a good number. i was also told that since i am running the power between 2 subs now that it maybe drawing more... is that true?

Hey, jacob or whoeevr is helping me out here, i need some input on the voltage im looking for on my dmm to acheive the full rms. I need some clarification on if i did the calculations right. 1st my sub amp, i running it at 1 ohm load to get the rated 1000 rms. so i would do sqrt(1000*1) = 31.6? 2nd (part i don't get) when i run my 100.4 bridged to 2 channels at 325 rms @ 4 ohm load, how do i do the equation? is it sqrt(325*4) or sqrt(650*4)? so would it be 36 volts, or 51 volts? I found it really outrageously high for the 100.4 to have a 51 volt supply when bridged, so i hope i right at guessing its 36 volts per channel bridged correct? Also, would you recommend runnin…

A vote to have Jacob arrange his lines as such. Top end: Nightshade NS-4000D High end: SAZ-1000D, SAZ-2000D, SAZ-3000D "Entry" line: SAE-800D, SAE-1200D Vote yes if you like the idea, no if you don't

This is pretty cool build done by the guys at SAdemocar here in Moscow... a brand new VW Scirocco with bags running some Sundown gear

I ordered two shirts from Derrick. (sundown audio, purple) almost 3 weeks ago. I paid with a usps money order i have the receipt. i mailed it on a friday (nov. 11th) derrick and i emailed, he said he can have the shirt to me within 3 days receiving payment.. that was the last email i received from him which was almost 2 weeks ago. i havent received my shirts yet and i emailed him to ask if hes received my money order and he hasnt emailed me back. i understand it was just thanksgiving and black friday but i just would like to know whats going on and if my money was received and if im getting my shirts. has anyone else had trouble ordering shirts?

so ill give you some info first truck - 99 s10 ext cab (no 3rd dr) 2 15" sundown nightshades 1 saz-3500D blah blah blah anyways, the box i orig. built for them isnt cutting it, so now im thinking 3/4 wall (i still want to be able to see out my rear view mirror) so can anyone help me with a desgin? im looking to tune to 35 hz, subs forward port... not sure where to fire it 43" long, 15" or less deep, 26-28 inches tall, 26 would be more ideal. this is for daily! not spl, i want it to slam the low notes, but sound good on every thing else. let me know what you guys think. thanks!