Sundown Audio

Just bought an saz-1500d off ebay, and I am anxiously awaiting it, as I have heard many good things. I'll be replacing a Audiobahn a3201t that I've had for 3 yrs, pushing 4 mtx thunder 5500 10's. One question though.. will it have full manuf warranty since it's been refurbed by factory, or not? Thanks

what electrical upgrades will i need to run a sundown saz-1500d in my 97 s-10?

just had to say i love this amp, sounds 100% better than my last sub amp. if your reading this forum like i did before purchasing one, just do it.

Sometimes it pays to have an insomniac working for you huh? Christy will carpet it in the morning, and I'll see about possibly bringing it up to you. Paint was still a little wet, so it looks splotchy, but it's not like that in person.

hey team i was wondering i got my other order of FI audio products in i have a set of 12" btls dual 1 ohm and dual 2 ohm now. I have two sundown 3000ds on order which configuration would be best to get the most output?

Ok guys what you think two sundown SAZ 3000s with either FI BTLs or the MTX 9500s? i have both sets with size being 12s. i was wondering cause im going to start on a new box? Im looking for SPL but also SQ for daily driving.

well since some of the team member's have them what is the good word? what ohm you running? voltage? test's result's from amp swap's? any problem's? burp or roll? my first one should be here next week and I want to get ahead of the game.

I've got two sundown saz 1500's... Love em!!! Just finishing a custom box for 3 RE SX 12ft^3 @ 34hz and I want to put "RE" and "Sundown" logos on the box Is there any way I can get the Sundown logos? Does the company have them where I can call and order? I ordered from Ricky here in KY... Im in Louisville If you read this Ricky give me a call if you still got my number I need to holla' at you anyway This is Gerard This is my first post on the forum WHAAASUUP EVERYBODY!!!!

I was wonder have any testing been done on the SAX 100.2 and SAX 100.4. I about to become a dealer and I'm really in to great multi channel amps and I'm building a SQ comp car now and using DLS ultimate amps. I would just like to now want the real world output of these amps are, seeing how much headroom is built into the sub amps. Thanks for all the help in advance.

How reliable are the 3000d's @ 1/2 ohm daily on music?? my set-up will be for a daily driver and for bass race, thats why i ask..

Shipped prices are to the continental 48 states. Paypal ONLY unless I authorize another form of payment ahead of time. ---------- 1) Set of very nice passive crossovers. I had these made in 2003 and never used them... designed for a 4 ohm mid and an 8 ohm tweeter along with 0 db and -3dB positions for the tweeter. Originally made for VIFA PL 4.5" and Audax TM025F1 with a crossover point of around 3.5khz or so at 12 dB per octave. Yes, those are 12 gauge copper foil inductors that you see. Inductors alone are valued at: 2x 0.5 mH 12 awg @ $56.60 2x 0.68 mH 12 awg @ $66.30 These also have Solen Poly Capacitors... very high quality crossover designed with LEAP at Madisound. …

The SAZ-3000D is now available for the general public, contact your favorite dealer for pricing today!

Hey guys I recently found out about sundown audio and everything I read so far is most impressive I was wondering if any of you do active competitions with the Sundown amps. I am in he market for new amps and I need serious power because my 2 15"s will handle 6000+ watts easy for burps a piece and finding amps is not as easy as one would think. I am trying to get a better picture of the capabilities of these amps. please inform me Thanks Phil

???

it was late in the day that's why she looks pissed. and that day was a 148.8 but i'm up to a 151.4

I just picked up some scrap 13' pvc. how can i make sure i get a good square cut?

packaging looked perfectly Jacob, not a mark anywhere on the amp boxes.

Well I was cruising ebay and found a 1500 and of course bought it without thinking twice! It is refurbished but still has the original warranty and with all the talk about how wonderful sundown is with customer service I would be a fool to pass this deal up! Pics will be coming! I have an 02 2 door blazer and I am still debating on what to run either one 15"Q, 18" Q ported or 2 12" Qs sealed.... My electrical should handle it just fine I have a redtop under the hood with 0 gauge going to a second yellowtop in the back.

I'm running 10g wire for the POS connections and had a hunk of 4g laying around, so I used that to connect the NEG terminals. Any problem with running bigger wire for the NEG connections?

I'm curious why there hasn't been any mention of these amps since the preorder shipped out. There was a lot of talk up until then and I sort of expected some reviews to follow. Maybe I missed it but I dont remember seeing anything. So how is everyone liking these? I am considering picking up a couple and just wondering how they are performing for people.

ok running 4 1500's strapped @ .5 ohm each set or 2 3000's strapped @ 1ohm. what do you think? i'm leaning towards the 1500's!

this is the one song that doesnt flex so much....lol from a show yesterday ..... did a 153.1 and a 149 bassrace with 3 subs and 6 amps. had broke a set of amp jacks i didnt know about!!

A few Sundown guys at the show today... Big Al with 2x SAZ-3000Ds @ 0.7 DCR each un-strapped running on only two Kinetik 2400s + starter battery... powering 2x Kicker Solo-X 18" subs in a daily-tuned listenable, beautifully done, fiberglass box. All in his Cadillac Escalade. Honestly don't remember his class designation... believe it was truck/suv 25 - 48. 150.9 dB today! He has 2 more SAZ-3000Ds and more batteries going in soon. Each 3000D will be seeing 1/2 the impedance that the two from today were seeing. --- My brother, Adam Fuller, running 2x DD 9510s D4s @ 1 ohm strapped (1/2 ohm per amp) on 2x 1500Ds on stock electrical + a DEKA Intimidator in the no-wall 0-24 cla…

Wanted to share my install with everyone on here because I have been reading your post and advice for a long time. Its a saz 1500 on two Kicker L7 10's in a sealed box internally fiberglassed for extra strength and also for better sound quality. Kicker was not my first choice of subs but its hard to find a 10 inch sub with shallow mount that can handle the 1500. Went forward firing because its the loudest application you can get in the titan and also because up or down firing limited mounting depth. Went through 4 brands of subs and swapped out a diamond audio d5 1200 for the Sundown before being happy not an easy truck to get great sound out of. Here are some pics.

This thread will be growing... I am posting things as I get pics taken. Items that are sold will be put into italics with SOLD in the title. Shipped prices are to the continental 48 states... Paypal ONLY unless I authorize another form of payment ahead of time. ---------- 1) Set of very nice passive crossovers. I had these made in 2003 and never used them... designed for a 4 ohm mid and an 8 ohm tweeter along with 0 db and -3dB positions for the tweeter. Originally made for VIFA PL 4.5" and Audax TM025F1 with a crossover point of around 3.5khz or so at 12 dB per octave. Yes, those are 12 gauge copper foil inductors that you see. Inductors alone are valued at: 2x 0.5 mH 12…