Sundown Audio

I need me a couple

Hey Jacob noticed you has some prototype Comps listed in your current set up. Will we see some of these sometimes?

I hit a 131.7 with one sa-8 in a .75cf box tund to 32hz of a rf 500.1 I cant rember what song I played it is in a 06 chevy equinox and I did beter then some of the people with a par of 10's and single ported 12's I feal bad for the kid with the aq hdc3 12 off 1000+ wats he onely hit a 128.6 but his was in a reg cab truck with the sub facing the frunt and the port facing up betwing the seats

I was just wondering what store actually has some of these in stock.....Looking to upgrade from my Type-Rs and I believe this would be a good upgrade...What are you guys opinion???

Someone is going to have fun opening all these!

Forum has been slow this week Whats up guys ?!

I missed the presale because I didn't know what I was gonna need (want). Now I'm thinking I want to go active and I need a 50 watt amp with a good crossover built in for tweeters (or maybe just bridge a 50x4 for the mid-bass). But I'm looking around and can't find the sax 50.4 anywhere... Anyone know who is carrying this model? It's not that there aren't other ways to get around this problem...a 125.2 for midbass...a 1000D or 1200D for subs....but I'm trying too look at all of my options (and put the least strain on my wallet / stock electrical).

I just placed an order at DbR for a refurbished SAE-1200D. They are stated as not including the remote. Does anyone know where I can get one for it? Are they a standard phone jack type remote that I could snag one from Ebay or somewhere else ?

it will be awhile before i can get an amp but i would like to get a sae1000 to power a 18 BL. so where can you get them. like what dealers will sell them. thanks

Does sundown have a webpage? I googled it buut found nothing.

T'm trying to find the right amp for these im stuck between the 125.2 and the 100.4. can i run those passive? ive never set a front stage up so ive been trying to find the differences between passive and active, can anyone explain or give me a link to read on this? i only have a minor understanding but want to learn! i looked on the 12volt but couldnt find anything, maybe i just cant find the right stuff i want? i would prefer the easier setup because of my inexperience, so im thinking passive on a 125.2, would that work and sound good? the porblems i can think of for active is if i got the 100.4 would that give too much to the tweeters, or would i be able to tune it d…

I was planning on a upgrade in the near future. i was thinking about running 2 Fi BL 15s fully loaded on eather a sundwn 2500 or a T2500.1bdcp? these two amps are sick.. i like both.. i like that there underrated and probly get somre in the 3000 or a little more... but i like both... im just undecided... can somone toss in there 2 cents on my topic?

I finally got around to a dry-run of my comps and amps last night. I must admit, the JBL P650c's sound every bit as good as I'd hoped. The Sundown 100.4 really makes them shine. But I've been thinking, isn't it a waste of the 100.4 to just drive the two front pairs? They run at 4 ohm, and I end up only using the first two channels of the amp. I also purchased a 100.2 to drive my RL-i8 DVC4, but I wonder if it wouldn't make more sense to swap amps and have the 100.2 driving the front stage and move the 100.4 to the sub? This would also fit much better (physically) into my vehicle, as the 100.4 peeks out from behind the driver's seat. Can anyone suggest the best scena…

Here is my set up......so far Head Unit - Pioneer Premier DEH-P690UB Front Stage - Hybrid Audio CLarus 6.1 Sub - Image Dynamics Q12 (DVC)...just one Question is which amp would work best....the SAX 125.2 (bridged) or the SAZ 1000D? Also, I'm looking at going active setup. Will the built in crossovers in the SAX 100.4 work as an active setup? Thanks

i'm currently looking at getting new Amps for my setup i'm running 4 RF T-2 15s, 2 250 amp alts. 10 batteries at 16 volts. I'm thinking about adding 3rd Alt if need be I have the 3rd one on hand. i know that sundown has 3000watt doing well over the rated output at 14.4 volts. I have heard about a new amp that is coming out and i'm very interested in running the Amps but i don't want to over load the subs to much(LOL) yes i do....... this is all installed in a 93 Jeep 4X4 Lardeo.

trying to decide which amp to get to power a fully loaded 15" fi bl in a 3.5ft^3 box tuned to 33 hertz. deciding between the saz 1200, saz 1500 or if i should pre-order a new saz 2000. money isnt really a problem so its just about the perfect pair, any input?

I am looking for an amp that is 80-90watts at 8 ohms. Will any of the new amps coming out be able to put this out or am I basically stuck with a 100.4 bridged with gains down?

I'm going to go ahead and have my SAE 1200 run a DC lvl 4 12'' sub. I haven't decided on a front stage yet, I'm looking to run an active 3-way midbass//mid range//tweeters I think I'm going to go with the SAX 100.4d BUT I need another amp! Should I use the SAX 100.4 for the mid range and tweets? or the tweets and midbass? or the midbass and midrange ????? And what other amp should I use? SAX 50.4 bridged? or ... ? suggestions and explanations why please

I purchased 4 saz1500 amps. I have not purchased my subs yet. Would it be better to run an amp to each sub individually or link 2 amps together and run them to 2 subs each? I planned on buying a mlx-100 so signal loss will not be a problem.

Okay.. I might be able to snag a pair of these 10w7 for a decent price. However, I am worried that because they are single 3 ohm coils, then I will not be able to run them efficiently on the Sundown amps. The 10w7 is rated at 750 watts rms each at 3 ohms. What are some amp and wiring configurations that would work for me? I'd like to give them their recommended power, but the JL website shows that the subs don't like to handle more than 750 watts continuous as it gets to the black line (warranty voided). Is this power rating from JL "over-rated" or "under-rated" for their subs? http://mobile.jlaudio.com/products_subs.php?series_id=5 I currently have 2 gauge power and g…

all 16 tweets............lol the 16 mids will be powered by 2x 100.2s (8 mids per amp) i was going to get a 100.4 for all 16 tweeters, i think i came up with a 3.3 ohm load per channel (4 mids per channel) each tweet is 3 ohms, DMM reads 3.3 ohms.... what would be the best way to do this? really dont need more than 25w per tweeter at most.

I need to add alittle color to the back of my car, so I painted my amps white....What do you guys think? Before After

Here you guys go...Loud as hell! Moves some serious airrrr Another one....Look at that b-pillar! Also I FAIL at camera taking because I had to use my i-pod and in order for it not to be in landscape i have to hold it VERY awkwardly... Jake, expect to hear from me in the near future about some certain things....

Just got these in - Thanks Jake!!! these have the NS parts since the z v3 parts were not in yet when these were built

was just wondering what kind of numbers you all are seeing out of them. i know i already read the amp testing thread was just wondering from other people who are using them as well.