Sundown Audio

so im buying two e8s from a friend for 50 dollars but the tinsel leads are messed up. how much to get them fixed? they guy im buying them from talked to jacob and he said he would do for free just to pay for shipping but i was wondering if i could get a quote. idk if you guys are still going to cover them after so long of them not being fixed.

What is the fusing of the SAZ-1000D? What is the power inputs? I have seen 3 different specs on three different sites!!! I just want the truth!!!!!

I would like to know how much is the recone for ns 12" and whats included in the recone package? TIA.

Hey guys, bout to order a SAZ-1500d and a SAX-125.2 and I have a 12inch Nightshade on the way. I'm also gonna put a Kinetic HC1800 in the trunk. I'm gonna order a dual amp kit from KnuKoncepts. My question simply is whats the best amp kit for these amps? I guess it would be more of a question about what size I need. I just want to do it up as nice as possible. KnuKoncepts looked good, but I'm also open to recommendations of other wiring brands. I also want to do the Big 3. What exactly would I need for that? Any other suggestions or advice would be greatly appreciated. I've been around for a while but been out of the game for about 5 or so years(not that I knew all that…

Jacob, Are your amps rated with a reactive (nominal) load or resistive? In other words, are they made knowing a reactive load will be placed on them in normal use? This is brought up due to the number of "impedance rise" and "I can wire the 3000D to .5 ohm nominal because it will actually be above 1 once the sub is wired to it due to the rise" questions and comments. *I am not trying to single your amplifiers out, I just wanted to know in general and since you're on the forum I figured I'd ask you.

Looking through the owner's anual for my 125.2 and see they have a diagram for 3 channel tri-mode. Anyone using it? How much could I expect going to each speaker? I plan on a another amp for the mids and highs, but I was just wondering.

SENDING AMPS IN WITH JUST THE COSMETIC CARTON IS NOT OKAY - NOT EVEN IF YOU WRAP IT WITH BROWN PAPER OR A LAYER OF CARDBOARD. </rant> Seriously... I don't pack them inside another box for my health. You MUST have the extra padding on the ends. MUST MUST MUST. UPS / FEDEX / DHL / USPS WILL DAMAGE THEM. http://www.sundownaudio.com/warranty.html "In the event of shipping damage due to improper packaging of the return the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return!" Okay, I'm done for real this time

I live in ct. and am willing to help others set up thier amps and head units with my o-scope. it makes a difference knowing exactaly when you have distortion or clipping. if i can save even 1 good sub from death it will be worth it. i dont have alot of time on my hands but will help when i can.

Would it be possible to trade the v1 nightshade I sent to get reconed for the new v2?

I have a 100.4 and mli 65 and SEAS Prestige 27TFFNC tweeters. What is a good starting point for my cross over settings. Thanks in advance

There are two availible. I know some of you want one of these really bad and we just happen to have 2 availible for purchase. Go here: SAZ-3500D Refurbished @ dB-r $825 each First Come First Serve Thanks! Chris dB-r Electronics

Both Brandon and I will be out of town from the 5th to the 14th this month (January 2013) for a business trip that involves CES and several other sub-trips while we are on the west coast. Debbie will still be here on the phones and e-mail to process as many orders as possible (paperwork-wise). We will also still have Thomas in here in the build room and also the rest of our shipping and packing crew will still be here. Some advanced or tricky questions / orders may be delayed while we are away but most "standard" work should be handled without much issue. Both Brandon and I will do some e-mailing in the evenings from our hotels; as much as possible. We are both still a bi…

I understand that the specs on this amp state 160x2 @ 4 ohm bridged and they are underrated. I was just wondering what these amps normally put out at 2 channels @ 4 ohm bridged.

http://www.mecacaraudio.com/

Was wondering why the 3500d isn't available in the SSA store anymore? I checked before I bought mine alittle over a week ago and it wasn't listed? I didn't see anything about them being discontinued.

Lots of things going on around here have resulted in an e-mail backlog again. Started around the 14th of January -- some e-mails scattered around from then until now need responding. So if you are waiting thanks for the patience and I'll catch up as soon as I can.

I hope this isn't a stupid question. A friend of mine has the SAE-1000D and wants to run it at 2 ohms to power his pair of JL Audio W3v3 13.5s with 600 watts until he has the money to get the electrical upgrades he needs for his car. He bought the amp so he could expand his system when ready. Right now he has a Batcap 800. He eventually wants to get a bigger alternator and 2 good drycell batteries in place of the Batcap and a 2nd SAE-1000D and 2 Icon 15s, but for the time being just wants to use his JLs. How should he treat his gain for the JLs being the amp is going to be ran at 2ohms rather than the amps max at 1ohms?

can the sae 1200 be linked or not??????????????

Hello. What would you recommend to cabinet volume and Vents for two Nightshade 12 inches subwofers? driving them with a Sundown saz-3500d at 2ohm and racing .5 ohms. I would like to have a spl box that plays as high as possible but with Vents Can I change when I play on a daily basis. Excuse my bad English but I blame Google Translate! =) Hope you understand what I mean Please sign in liters and centimeters, so I understand what you mean too .. Have a nice day! Greetings from Sweden

i got my SAZ-1500 today! woot! just waiting on my box from Audibel Customs to ship here, and later this week ill order my bl 15 and 1/0 wire. this amp looks amazing, and is the heaviest amp i have; the most powerful one by far. cant wait to hear it!

I am looking for some cool designs with Sundown Audio logo for a t-shirt. I've seen one before, it was with some amp guts in the back ground and the logo in the foreground. If someone can post that in good quality so I can give it for a print out, it will be great. Also looking for other ideas. I am going to make a white tee, so something that will look good in white back ground... but, just post whatever you got.

How much power would I get if I Bridged a SAX-100.4 @ 8ohms? Does the SAX-100.4 have Sanken Bi-Polar output devices?

ok, so I'm working on my front stage right now. However, I have a Z 15" V2 and a 2000D and was originally going to add a second amp and subwoofer and wall it off behind the rear seats in my scion. BUT with the recent publicity/impressiveness (is that even a word?) of the SA series, I was thinking 4 12" SA series off of a 2500D (giving them each their rated rms) would be a better option. So, it would be a little less power but a ton more cone area. what say you? think it would be louder?

been out of car audio for about 2 months now, but the rest of the year is looking promising... i have everything i need for a complete system just wanting to recone the ns 12's i have to 15s and i have been going back and forth with pete about a rear loading horn for some time now but cant make my desicion... simple question is that what would the advantages and disadvantages of either set up.... power is 2 D2 ns, 2 1500ds @ 2 ohms strapped, 2 dekas 9a31s, and a ohio gen 225/160 HO that has not been dropped in yet... previous systems were 1 15 fully loaded btl in a chambered t line.... which was the loudest set up to date, and 2 ns 12s in 5 cubes @ 35 (which was way too…

on a dual 2 ohm sub, what wattage would i see with a 4 ohm load at the amps..... would it be 1600 watts.... 2 ohms per amp..... i know, a little unpractical..... just temporary , sorta just curious.... oh, sorry , two sundown audio saz1500d amps. thanks for your time! chop