Sundown Audio

it will be awhile before i can get an amp but i would like to get a sae1000 to power a 18 BL. so where can you get them. like what dealers will sell them. thanks

These are actually of a proto that was shipped in December to Mike (theothermike). He was nice enough to share with us!

Based on the amount of support required for people who have failed to do their research and install amps properly I may be pulling 0.5 ohm warranty coverage from future "Z" series Class-D amplifier sales. Plenty of information is posted on the forum but I continually get support questions about sub-1 ohm operation. It turns out that 90% of the time it is a gain knob set too high, insufficient voltage, or a load that is incredibly low beyond 0.5 ohms due to wiring errors. Have there been any failures? Not any more than I would expect from just factory defects and user error. I've had one come back that was actually toasted beyond recognition... but that user had an issue i…

It is under the random pictures in the rides section. This is only the first of quite a few I hope to see. Kyle has been a touch busy with his other job but promised he will get me the 1500 soon! Anyways, without further ado: http://www.sundownaudio.com/rides/random/p...wallpapers.html If you would like to submit your own, please contact me at [email protected].

im fixing to wire up my 1500D to one sub, how do i go about doing it, just use one + and one -?

Well gents, I have accepted the task of getting the 'Rides' section of Sundown Audio website back up and keep it relativly updated. Glad to be 'partially on-board' the team here... . Anyways, in order to make a successful 'Rides' section, I need some rides to feature. Basically I am looking for anyone to up some pics and descriptions for us to throw up on SundownAudio.com. Also if you have ideas or suggestions for the rides section, I would very much like to hear your input. Oh, and my name is Brad (SilverBane here on forums) and you can contact me at [email protected] I hope to get some mail soon!!!

Look for them in the next week! Got my artist working on them now. Will be 4 to start, simple, clean, and a little stylish! Available resolutions: 1600x1200 1280x1024 1024x768 800x600 If there are any other resolutions you would like, please let me know.

Hey, just seeing if it would be ok to have your logo etched into plexi for my trunk.

Has anyone done business with them?

Fully tested down to 1/2 ohm each. Both were mounted and used and show a few signs of use on the mounting feet and near the speaker connections. Both come with remotes but no manuals, you can download the manual here: http://www.sundownaudio.com/products/SAX-1...manual_0607.pdf The white dot in the picture is from the flash and is not a mark on the amp. $475 shipped each or $900 shipped for both. They come with the full warranty from date of purchase.

Do you guys offer a custom finish that won't sacrifice thermal dissipation capabilities? In particular, I'm looking for blue.

When you are gonna put out the pre-order for it, is there any way you could pm me about it, i am very interested, or even pm me a price on a prototype one, im sure i could test it for you, even get you some bench test numbers.

Here is one of my 9510's that will have the furry of the 2 SAZ-1500D's ganging up on them. Its getting so close to having everything to install I can taste it.

I am just checking if you got my PM, I have seen you on, but not sure if you just missed it or are ignoring me. BTW, I dont think you are ignoring me!

How many people run Sundown Amps on Fi subs, has there been any testing of the 1500d on the Fi subs?

http://www.soundsolutionsaudio.com/forum/i...?showtopic=7406 It is a sticky post up top... updated today with pictures on how to strap the amps. I've had several problems lately with customers who has not hooked up the amps correctly when strapped due to confusion as to what the manual is saying. Hopefully these photos will answer your questions.

Truck/SUV 0-30 - We did a 146.4 dB. Good enough for first place for the day. Truck is unmodified factory electrical and no sound deadening. 1 SAZ-1500D on 2 SI Mags D2 12's wired to .5 ohms in a 5cu ft box; did a good amount of work to get the port just right. Looks like the key frequency was 48 hz.

Running a strapped pair of Sundown 1500d's at 2ohm daily, and .5 for comps. Kinetik 1400 up front, two 1800's in the back. Or, to the point, will an excessive amperage 200a be ok?

PM me, or post here and I'll PM you. Thanks.

Well, I noticed the 1st victim thread, so I figured I'd post up the 2nd victim of the strapped Sundowns here. Sub is a Mmats Juggernaut motor that was reconed by RE. It had about 10 burps on it, and 30 seconds on music, although it wasn't happy before the 30 seconds on music run. It was already rattling, but I figured I might as well take it out in style:

2-SI Mag D2 12's and 1 SAZ-1500D Here is the link to some testing we did for the NSPL Comp. tomorrow. Thank god Jake was there to stop us from using 2-1500Ds last night.........we would have hurt something!! Hope yall enjoy:) Nikki

im on the verge of purchasing my amps for my blaze and wanted to kno wha amp should i run for these comps. ill be runnin 2 sets in my doors. wha amps would be best for these so i can get em to the potential. a 2ch or 4ch? an amp on each set? thanx

Heres my first post, its been hard in the past for me to sign up on the forum. This is a test from about 2 months ago. Each amp is at .5 ohm. http://s82.photobucket.com/albums/j242/fun...nt=SUNP0001.flv

My SAZ-1500D's have been just sitting waiting for my subs to come so I haven't really looked them over but I installed my SAX-100.2 today for some temporary bass. I noticed you used screw terminals. Any reason for this? Any hookup where I could get allen terminals? Screw terminals just seem cheap to me and nice allen ones look clean. Nitpicking.