Sundown Audio
Subforums
2,870 topics in this forum
-
Are the Sub Out RCA's controlled by the subsonic filter built in the amp? Or are they purely non adjustable pass throughs? Thanks
-
0
Reputation Points
- 1 reply
- 683 views
-
-
Good afternoon. I have a Sundown Saz 3000D. He broke down and needed repair scheme. I live in Russia, may my tongue is not very good. Help me find a diagram on this amp.
-
0
Reputation Points
- 0 replies
- 682 views
-
-
Ok, i've been doing some research about these drivers and my question is: Are these daily woofers? If so what tuning frequency do they like? I am wanting something on the LSQ side but need 2k rms daily powerhandling and low frequency extension ability. I want to tune around 28hz. Does this driver fit the bill? Thanks.
-
0
Reputation Points
- 1 reply
- 682 views
-
-
aight i was on youtube and saw 2 sundown e8's in a ranger and was very impressed. they would be goin in my single cab ranger. i want 3. i read that they require 0.280 cu. ft of air which will be awsome cuz my boxes are .45cu. ft. there sealed enclosures. but id like to kno wats the max power these things can handle? How mcuh do they go for? they seam really bad ass. im trying to compare these to the 8" kicker l7's. thanks.
-
0
Reputation Points
- 1 reply
- 682 views
-
-
http://www.soundsolutionsaudio.com/forum/i...st&p=366883 --- PM me about cosmetic defect Nightshades (B-Stock). B-Stock 12s = $350 shipped B-Stock 15s = $375 shipped The b-stock defect looks like this: --- There is a limited quantity so don't hesitate to PM and ask me. If you wait too long they'll be gone
-
0
Reputation Points
- 0 replies
- 682 views
-
-
-
About how much power with 2 1500d's strapped at 2ohms put out?
-
0
Reputation Points
- 1 reply
- 679 views
-
-
Are the SA 8 or 10 available for purchase right now?
-
0
Reputation Points
- 1 reply
- 677 views
-
-
As the title says... other than the casing what else is different.... guts still the same.....? I'm talking the 07 amp vs the 08 amp... thanks
-
0
Reputation Points
- 2 replies
- 676 views
-
-
Minimal break-in time... just a few minutes on the bench: RE (Series): 4.33 ohms Fs: 30.3 Hz Qes: 0.519 Qms: 7.250 Qts: 0.484 Le: 4.743 mH Vas: 29.077 L BL: 22.168 NA Cms: 89.22 uM/N Mms: 308 g Took a few minute break from shipping 4500s and measured these bad boys... I expect Fs to drop to 25 Hz or so with full break-in... which will take probably a week or so of play on these.
-
0
Reputation Points
- 0 replies
- 671 views
-
-
I have a Rockford Fosgate Prime R500-1 and a sa-8 in a .8ft^3 at 34hz and it sounds nice this thing pounds out more bass then I need when I lising to rap and stuf with a lot of bass but win I lising to pink floyd or styx ther is not so mutch bass this is my first ported box I like seald box's better so my ? is if I get a sa-12 and put it in 1.25cf seald with 500 wats going to it how will it campare to what I have now this will go in the back of a 2006 equinox hear is a pic of my box on the ca.com site http://www.caraudio.com/forums/enclosure-design-construction-help/512899-what-do-you-think-my-box.html
-
0
Reputation Points
- 1 reply
- 669 views
-
-
Ok I have a saz1500d and a ns v.1 12 inch sub. Box is currently 1.45 cubes after sub displacement and current port. Port is a single 4inch aeroport which is as long as can be without touching sub, don't remember actual length, however, I do know I punched it into the port calculator on 12volt.com and it was 38.3 hz roughly. I want to bring it down to about 32-34hz. My question is would it make a big difference if I used a 3inch port with my flared ends of my 4inch aeroport? Or should I just go with two 2 inch aeroports. I would like to use what I have currently but wanted some answers to this question. Second question, should I just keep what I have since its a hig…
-
0
Reputation Points
- 1 reply
- 666 views
-
-
Just need to know the displacement of an E8. Thanks for any help.
-
0
Reputation Points
- 1 reply
- 666 views
-
-
I was just wondering what it is, and 1w/1m, or 2.83 volts? thanks
-
0
Reputation Points
- 0 replies
- 662 views
-
-
Well you will be able to get one again soon. We made a special run of SAZ-1000Ds just for WoofersEtc.com that is due in about two weeks. Many people are looking for mates to their 1000Ds and this will be another, and the final chance to get one! This will likely be a one-time deal for a final run on these amps. I'll get more information up on pricing and whatnot once they actually arrive here at our facility.
-
0
Reputation Points
- 1 reply
- 660 views
-
-
I've been kinda rethinking the whole larger setup that I had planned. Would a SAX-100.4 be suited to two AQ SD2.5-15s in a horn? AudioQue SD2.5 series The subs are D4. I'm still waiting on a shipping quote from AQ..
-
0
Reputation Points
- 1 reply
- 659 views
-
-
right now i am pressed for cash and i cannot buy what i want. is there a possibiblity that there will be more sales going on sundown amps such as the 3500 before xmas?
-
0
Reputation Points
- 3 replies
- 655 views
-
-
I know i had this bookmarked but i cant find it. heading to get the mdf right now, hopefully someone will answer while im gone. have 4 SA-8s, need displacement for the sub itself. also if anyone has any links for box designs, would help with time.
-
0
Reputation Points
- 1 reply
- 653 views
-
-
What's the current draw into the remote turn-on input at 14V? Kent
-
0
Reputation Points
- 0 replies
- 652 views
-
-
hi all i have a sax 100.4 and a saz1500d ... i want to change my install a bit ... do something a bit more visually appealing now in the pics below ud see one of the amps " floating " in the center ... i want to do a symmetrical pair like that the lower board will have a small fan and it will have gaps in the board exposing the heatsink a bit so now my questions 1 : has anyone ever installed their sundown amps in an area with minimal ventilation and did it have any issues ? 2 : do you think the setup will have adequate cooling ? 3 : what improvements do u think i can make?
-
0
Reputation Points
- 1 reply
- 651 views
-
-
-
Incompatible Browser | Facebook become a fan !!!
-
0
Reputation Points
- 1 reply
- 650 views
-
-
Okay i am running very low on space now and i have a question could i put a 1500d then bolt a board ontop of it then put another one on top the board would it cause heat issues with the bottom amp would i need to add fans or think it would be alright?
-
0
Reputation Points
- 2 replies
- 649 views
-
-
We are closed Friday - July 3rd. I will most likely not check much if any e-mails over the weekend.
-
0
Reputation Points
- 1 reply
- 648 views
-
-
I have a payment for $5 here with no notes on it. Need to know what it is for. It is from 1-28-09
-
0
Reputation Points
- 2 replies
- 646 views
-
Who's Online (See full list)
- There are no registered users currently online