Sundown Audio

Hi Guys, As some of you might know im planning to get a saz 3000 D when my ship come in. I am also planning to get a eclipse 7200 due to some pretty fancy features. Problem is that it said to put out 8v on paper while the saz is said to except 6 V on paper. Sure I believe the specs of the Saz more but and sure the eclipse dont put the 8 v all the time if ever, but will these two pair up nicely and if not what will happen. thx again.

Was wondering if you guys are going to make a amp in the future thats full power (so to speak) at 2ohm instead of 1ohm? Instead of just linking 2 together

Today was a local dB Drag event here in Sacramento. My first comp running Sundown Audio and I took 1st in Bass Race 149.9 class. I was the only person there running Sundown Audio so I was representing! Qualifieing I held a 49.9 for about 10 full seconds right off the bat but then hit a 150 so I drop it down and ended with a 149.5. On my run I did a 149.6. Im really Happy with Sundown!!! I have pix and videos uploading but will take a wile. Ill post them up when there finished. All and all it was a good day excpet I think my 200A alt is on it's way out! =(

So many thanks to Jacob. I got home from work today and what did I have waiting for me?? so what could it be? oh yeah! so what is it going to be powering? 3.1ft^3 tuned to 32 Hz 45 sq in of port I hope to have it installed no later than this weekend. once again thanks Jacob Chad

I posted these on a couple other forums and figured I might as well share them here. 2 Sundown NightShade 15s powered by a pair of Sundown SAZ-1500Ds. First hit. These are legal scores. (sealed up, mic on the windshield) After finding the right frequency. Door open, mic still on the windshield. Hardcore score. (door open, mic in the kick) This is in no way an spl setup. It plays music great and is already ripping my Explorer apart. The sunroof, that was previous glued & sealed shut, has ripped open and the mechanism that lifts & lowers it is completely trashed. The side windows are falling out. I'll be resealing the sunroof and side windows very soon…

E8 v.2 Production started today! ETA is roughly the end of November for these to arrive. As always with a pre-order there is the chance for delays so please keep that in mind -- pre-orders are final and there will be no refunds for delays. E8 v.2 Prototype Pictures: * Compared to SA-8 : E8 v.2 on the left * Bumped back plate allows 25mm of throw before bottoming out -- but the surround will stop the driver before that. * Exact same spider as the SA-8 but only a SINGLE layer instead of two like the SA-8 * Comparison to E8 v.1 Motor Specifications : D2 Model : RE: 3.927 ohms Fs: 43.59 Hz Qes: 0.643 Qms: 4.404 Qts: 0.555 Le: 2.75 mH Vas: 7.22 L BL: 13.023 NA Cms: 131…

I'm about to sell my Fi Bl 12 and was looking at the SA series subs. I've never done 10's, so i was looking at doing 2 10's (of course the box will be behind the seat). I can fit up to 2.8 cubes behind the seat, but looking at about 2.3 after port and sub displacement. My current setup does a 140.0 on the dash (at 40 hz), the box is tuned to 28 hz, and it smashes the lows like no other. I'm wanting to know what would be a good box volume and port area to run 2 10's in that would get me into that range, or hopefully higher. Also, i'll be running about 1300-1400 wrms to the pair. I know there are a lot of factors that go into how loud a setup is, so i would like to tune the…

Just got them in and QC tested them all on the bench; very happy so far. Still need to get them fully charged then run preliminary specs (have to send them out to do so as our magnetizer isn't in yet) -- but we are still stiffening up the surrounds so those will only be ~80% accurate initially. This is also the first look at our tooled 18" spider adapter piece ! On to the photos (video of the 18" is uploading) :

I have two SA-15's and I just finished making my box with the intent of adding in 6" PSP ports when they arrived in the mail. I was pressed for time because I'm going back to school (nine hours away) tomorrow so that's why I finished everything except for adding the ports. Well I ordered the ports from parts-express last Monday and just to make sure they got to my house in time I paid for two day shipping. I MADE SURE they were in stock when I ordered them. Guess what happened? The ports didn't ship out until Thursday. I called parts-express on Thursday to see why I didn't have the ports yet and they told me that "they just shipped out today (Thursday) because the parts w…

yes if u guys havent seen my van is done for the season because i cannot afford to keep buying a new windshield after i shatter it in 1 burp. i have decided to give the van away to a local shop to use as a marketing gimmic by shattering a windshield at every one of thier comps they hold. im contracted as team sundown this season and i have 3 practically brand new 3000ds that i have no use for now i didnt know if i am allowed to pass them on to other team members that want to buy a 3000d with the new heatsink design since they are on backorder right now. it sucks to have to get rid of a vehicle that wont let me do what i want because the windshield is the issue.…

Thanks to the Sundown folks for answering all my stupid "rookie" install questions. This was my first install and I did everything but build the box. My emails were all answered within 20 minutes or less. GREAT CUSTOMER SERVICE. Those Nightshades are going to rip my little CRV apart. Here is the finished product. (Well almost. I haven't gotten the 100.4 hooked up yet)

Some "team" shirts would be nice for sbn 2010...who's wit me??? Good idea?? Bad idea??? Cause I have a feeling we gonna own that motha

So I bought a SAZ-3000d from db-r last december. I finally got to hook it up today! It turned on, sub wouldn't move, then the amp would go into protect. The btl was wired at one Ohm. So after reading the manual, I disconnected the speaker wire and the amp did fine, didn't go into protect mode. So I re-did the wiring on the sub but before dragging it out to the car, I decided to test the amp. Turned it on and the Blue power light came on and about one second later it switched over to protect. Needless to say I was astonished. The wiring is done as so: From battery plug in of amp to 300amp ANL fuse, from fuse to + battery, from + battery to another 300 amp ANL fuse, from t…

Guys, I am confirming this, I am running 3 SAZ-3000's to 3 DC Audio lvl 5 18's... I have only 1 RCA output off my Deck I had a MLX-100 but does not work... What is the best way to link these amps so they get a signal. Sorry might be a dumb question but I not gunna fry something cause of my lack of knowledge.

Okay guys. I have decided that the program was too successful to cancel over one sour deal. So... it is back. This is what it is all about for those that do not know: * You contact me with what you have that you want to trade-in * I look up average re-sale value and send you an offer * You can choose to take my offer OR NOT but I am not going to haggle, my offer is what it is * If you choose to accept the offer you confirm with me then I add you to the trade-in list * You ship your amp(s) in so we can test them * You can either send money with the trade or we can contact you after testing for the balance via Paypal * Once the balance is paid, if there is one, we ship your…

* An SAZ-4500D next to a pair of NS-1 prototypes. * NS-1 has speaker outputs on the other side. * Little SAE-500D Prototype hanging out -- this is not the final case; just have not tooled up the case I'll use yet. * SAE-500D guts -- stout little amp. * Guts of 4500D and NS-1 * Guts from the other side. * Top view of the guts. * Significantly larger output inductors on the NS-1 to handle the additional power output. * While the NS-1 has fewer transformers they are much bigger. I have not been able to locate my power clamp so no testing on either yet. I'll keep looking for it... not sure I'll be able to get to the NS-1 today or not due to the electrical requirements…

There is a BIG sale going on. We authorized dB-R to do a huge 25% off across the board sale on all Refurbished Amplifiers! http://www.db-r.com/sell/store/ Here is a price list, just some examples: SAX-100.4 Refurbished as low as $202.50 SAX-50.4 Refurbished as low as $153.75 SAX-100.2 Refurbished as low as $149.25 SAX-125.2 Refurbished as low as $157.50 SAZ-1000D Refurbished as low as $206.25 SAE-1200D Refurbished as low as $217.50 SAZ-1500D Refurbished as low as $261.75 SAZ-2000D Refurbished as low as $382.50 SAZ-3500D Refurbished as low as $581.25 These ALL have a 1 Year Warranty!

Has the title states , do you? How about some pics of your shop has a bonus?

decided to take a quick video. No tuning done yet, just fired it up and shot a quick video before I got yelled at.............lol Just a pair of 10's:

What verison nightshade is listed on the store? is it the newest one or is that the v1? and would a 15" ns take 2200 watts daily?

To order a re-cone e-mail [email protected] -- do not e-mail my "sundownz" address if you need a quick response.To reduce back-and-forth e-mails ALWAYS include the following : 1) What you are ordering -- Model, Coil Configuration, Etc. 2) If you already have a basket or not; please check below for any special notes. 3) If you need ANY custom options please specify up front. 4) !!! YOUR ADDRESS AND NAME !!! 5) A picture of what you have goes a long way to be SURE we are talking about the same thing. IT WILL TAKE, ON AVERAGE, 10-14 days for a built item like a drop-in to be completed. ---------- EDIT 8/30/11 : WE CANNOT WARRANTY DIY RE-CONE ASSEMBLY ISSUES. Rea…

Hello everyone. Anyways my stupid question is does jacob send tracking info when shipping an item? If so I suppose my amp hasn't shipped yet. Just curious though. I searched for my old email from when I ordered my 1500d but didn't see it. Also since I made a thread I suppose I'll do a mini build of installing the amp (125.2) on my components. I know everyone likes pics One more thing. It appears the led on my remote gain on my saz-1500 died, is that common or what? Not too concerned since it's just an led but I'd thought i would ask. Going to test the led to confirm later. Anyways thanks everyone and keep up the good work Jacob!

i manage a print shop where we Wrap car/trucks & so on so i did 1 of my designs on my SAZ 1500d's i also did the power Distro block ( Gorilla Pimpin )

Looking into something that I'd be proud to put the "Sundown Audio" name on... and I think I may be on to it. I've been speaking to an engineer about doing a bigger power amplifier the way I think it should be done. How does 4000 watts @ 1 ohm @ 0.01% THD anywhere from 12v to 16v sound ? At a soft clip (eg: burp) up to 6500 watts at anywhere from 12v to 16v. MSRP would be around $1999 to $2199 or so for this bad boy. Would be about 33.5" long give or take... and accept dual 1/0 inputs. I may be testing a prototype by the end of the year. Don't ask about the ETA for production - it's a big project requiring a large investment so it's hard to say.

it was late in the day that's why she looks pissed. and that day was a 148.8 but i'm up to a 151.4