Sundown Audio

SA-8 v.1 are sold out from our warehouse for NEW woofers... WoofersEtc.com has quite a few still in stock, though ! So go check them out if you need one. Also... Nick is still selling the re-built units as well : Re-coned SA8's

Going to install a dual setup in my car during the winter months. The box has 1.17 cu ft. air space. and 8.5" depth. I can have a port put in if you guys think it would make a difference. Wanting to make sure everything is good before I start ordering stuff.Thanks

Building these for a customer... I wasn't happy with the limits I was facing with the 10" 12-spoke frame so I grabbed some different frames to use for this project ! One picture for now until I get some stuff back from the machine shop... but what is to come : Z v.3 Spider w/ Double Leads and Triple Joint Ring Z v.3 Vented Spacer Ring (from 18" Z v.3) Basket coil cut-out OD expansion at local machine shop Custom made spider riser made at local machine shop Wide-Roll Surround 10" Cone Full Length NS v.2 Coil The customer is planning to use quite a bit of power on these so I wanted to do something a bit special... anyone that knows me knows that I hate making 10s with 3" c…

I blew my sa12 and was wondering if this is part of the cone itself? and if i got a recone kit if it would fix this?

I am pleased to present one of our national records, established in Italy by the team sundown audio Italy - Team Dore. This machine has made the record in a category with many limitations, only 1 subwoofer, 1 amp, 1 battery, in a small hood! A "bullet A" style but with a limit of 60hz!!!!!!! This machine has 1 Nightshade 12" v.2 D1 SPL coil 1 Zapco 7500 (expect our NS-1 to improve) 2 Battery limited space, limited at 60hz ... a great and hard work for 1 year National Record at 154,3db in standard position (on glass) term-lab. a small picture on the box that shows the work and here is the video of the race I hope that jacob is happy with our work

My sub woofer sounds like the voice coil is frying on only about 350 watts rms at 4 ohms is it some thing to do with the new cones in the middle of the cone it gets pretty hot after only a couple minutes

Are there sa8 recones available? If not do you have an eta? Thanks Steve

Jeep Cherokee Sport 4x Sundown Audio sa-15s (stock) (4th Order Bandpass Enclosure) 2x Sundown audio saz-2500s 3x Mechman 300a Alts + Stock Unit 4x XS Power D3100s (12v) 156.3db off 4700w clamped power Jared can do a 3-round bass-boxing average of 155 dB or so... and the guys said he has done 157+ on burps. Withe one sub down from too much demoing Jared managed a 154.1 three round average at the Macon, GA show on Sunday -- on Saturday he showed the full 155.0 dB average :thumbsup: BASS BOXING VIDEO : ---------- OTHER VIDEOS :

This is pretty cool build done by the guys at SAdemocar here in Moscow... a brand new VW Scirocco with bags running some Sundown gear

Got a small stealth box I'm putting in my car and I need a sub for it. I believe the SA-10 would work,just want to make sure.I also need advice on which amp. Here's the box specs..... .6 cu ft space,sealed. Mounting depth of 8 inches.

Hey Jacob, I was wondering how much excursion is safe with these 10's. On some heavier midbass songs they get goin with maybe a half inch of excursion. Theres no hint of distortion o just want to make sure they were designed to handle this.. Thanks

ok guys i blew a coil outta my sa-15 today i was wondering if its possible to recone it to a sa-8 dumb question but i was just wonding the cost and stuff. thanks =me):

Just whipped up a quick ported box for a 03 Ford Lightning truck for a local here, box came out good and cannot wait to hear it in his truck. Box is pretty simple 1cuft tuned to 35hz with a single aero port. Will be installing this and building his small amp rack this coming weekend, and I have nothing but great expectations on performance from this sub. This is the second local here that I have recommended the SD series too who purchased them. The first I believe picked up a pair of the SD12s.

Well you will be able to get one again soon. We made a special run of SAZ-1000Ds just for WoofersEtc.com that is due in about two weeks. Many people are looking for mates to their 1000Ds and this will be another, and the final chance to get one! This will likely be a one-time deal for a final run on these amps. I'll get more information up on pricing and whatnot once they actually arrive here at our facility.

When are the nightshades going to be back in stock? what is holding them up?

As the title states, trying to find the displacement on Sundown Z18v.3's. I've tried for the last several hours using google and searching on several forums to get the info on these beasts. Thanks in advance to whoever can help.

So here's one of the shop run-around cars we managed to snag up a few months ago... an Audi a4 sedan the trunk is pretty much sealed off from the cabin with a full metal diviader with 10by12 ski hatch box is a bit over 2 cubes, tuned to 26Hz Stock bat under the hood Shok Reference 0awg to the back 2 SA10 d2's SAX1200D @ 0.5 ohms very flat from 22 to 37Hz Playing some music Now we add an XS Power D680, a nice 20Ah bat Scores went up and Vic - who designed and made this box this is a great box for music and playing lows...lots of flex and even moves decent air

Just got these in - Thanks Jake!!! these have the NS parts since the z v3 parts were not in yet when these were built

I am a new Sundown Dealer and I have been seeing great results w/ these woofers. BUT...the lack of mounting information is really hurting my leeway to fully expand my designs in limited space builds. I see that mount depth is listed most subs, but motor diameter would REALLY help also. probably an unreasonable request (just wishing) but a google sketch-up model of the subs would make my world exponentially better I just finished an install today w/ 2 SD-2 10's in a '97 ext cab chevy (sealed ~.6cuft each, customer loved it, great low-end response) and I "called" the SD-motor diameter ~7". After crunching some #'s, I figured that I can build a SICK budget setup w/ a sin…

Hey guys, greeting again from Russia... we just had the national DbDrag finals last weekend. Our team in Rostov quickly (about a week) build up a system for SS1-2 that was good enought to take second place in the class with a 156.5 two SAZ4500's two Sundown Audio z18v2 subs two XS Power D3100's here are some pics of the build and from the comp this has a ton more potential ...hopefully they will rebuild it soon with metal for the cage

Original Discussion Thread I expect to have this in by first of February if not sooner (working on better ETA). Production on the steel parts started first of last month but I am being conservative with the ETA due to the continually increasing delays we have experienced this year on production. Due to popular demand I'll go ahead and open pre-ordering on these models. E-10 D2 / D4 - $89 EACH ($105 regular) E-12 D2 / D4 - $94 EACH ($110 regular) E-15 D2 / D4 - $110 EACH ($130 regular) Shipped in the continental 48 states. Hawaii and AK e-mail for quotes. !!! USA ONLY !!! You can PAYPAL us at [email protected] OR order from your favorite local or online retailer du…

So here are the plans for my second audio upgrade I have a 2010 xb that i've self taught everything from engine work to visual http://www.flickr.com/photos/djfrozone/ Pics relevant. Here is my current setup Pioneer AVH p4100dvd RF Prime R300-4 Visionik 350 mono Infintiy 6022i 103t tweeters RF p1-110 sub wiht factory box. Ebay wiring amp kits i found and yea. I'm looking to do it right this time. The RF i have is a nice sub. clean sound, but nothing to write home about. it wont make u go "well shiiiiiit" I heard about the SA-8 from a friend on Scionlife. saw a video of it in a lil CRX and decided that is more than enough for me. not triying to win shows. but at times i j…

Originally posted by Skillz on CACO : ----------------- 2 SAZ3500's SAX 200.4 SAX 100.4 SAX 125.2 SAX 50.4

2xSA12 + SAZ2500D = 149.4 dbs - SMD Forum Originally posted on SMD by Greg Kashin. ---------- There was a regional comp this weekend and one of the Team Sundown guys was there to take the first place trophy :yahoo: car: Opel Astra OPC subs: 2x SA12's d2 amp: SAZ2500D 72Ah lead-acid under the hood and a Stinger 2150 in the back 149.4 at the comp dbrag legal sealed on the TL here's a vid testing the system a few hours prior to the comp: pics are a few and blurry...hoping to get more info on this later -- here's a nice video of the same car with just one SA12

Originally posted by Greg Kashin (Skillz) on CACO 9/27/10 -------------- Ok guys, this is a system being put together by one of the Russian competitors for the EMMA European Finals in Rotterdam coming up on October 7th. Will be competing as part of Team Russia in ESPL Experienced Plus Unlimited (yeah, that's the name of the class, check out the EMMA web-site for details EMMA: European Mobile Media Association ) if anyone wants to see the original thread it's http://www.bassclub.ru/forum/showthread.php?t=12724 with more pics and commentary in Russian :thumbsup: box is just under 11 cubes net