Sundown Audio

http://www.db-r.com/sell/store2/index.php?...;cPath=65_67_69 SAX-50.4 - $160.65 - $174.25 SAX-100.4 - $238.00 - $276.25 SAX-100.2 - $169.15 SAX-125.2 - $169.15 SAE-1000D - $233.75 SAZ-1000D - $233.75 SAE-1200D - $246.50 SAZ-1500D - $322.15 - $339.15 SAZ-3000D - $595.00 - $641.75 This is a BIG sale. Prices are good until 06/15/2009, HOWEVER, quantities are limited, so get them while you can! Get them while you can

Since we tore up the Nightshade proto I decided to have some fun showing off how strong the cone is. I cut the surround off so it would sit flat on the ground and had Justin (local sales rep) stand on the back of the voice coil: Just sits at around 350 pounds Neither the cone or the triple joint glue failed and he bounced up and down a bit while he was on there.

Below text compose by Mike Bruno for the sale of these drivers. We are not re-building them; Mike is. All after sales support will be handled by Mike by his terms on these refurbished drivers. PM: woofercooker – or preferably – e-mail: [email protected] for inquiries. ---------- I will be selling Sundown’s inventory of SA-8s that have either failed quality control testing or were returned by customers. Each of these woofers were tested by Jacob and found to have a defect in the coil alignment or other cosmetic / performance defects. I will be refurbishing these woofers with the latest OEM SA-8 parts and reselling them to the public. Many of these have never bee…

So after getting a hold of a clean logo for sundown, I was working on some other things when I just got an inspiration to do something creative. So I spun up some BT laptop symphony and ripped this out. If anyone wants a high res version 1920x1080, just let me know. probably do some more later, just got lots of house work to do today and I am procrastinating! LOL

http://www.sundownaudio.com/misc/protos/18...ken_playing.MOV Playing on the SAE-1200D prototype free air - full blast on the amp On the second track where it starts low and then gets quiet as it plays higher, its just running well into the crossover on the 1200D - sub still in working order minus the part of the basket and surround the UPS broke off!

Ok where to order my sa 8s from ? SSa store? and can somone tell my the speaker displacement of these? Thanks

I know I am overloading you guys with special offers and pre-orders... but who would be interested in a 125.2 pre-order ? We have SO many new things coming out that I really want people to have their hands on them right away to get the word out So... I have considered adding the SAX-125.2 to the pre-order frenzy... any thoughts ?

so im pumping gas today and the guy at the pump ahead of me seen my sub thru my windshield and ask'd if its the old power hx2. i said ya and he started talking bout he used to have a pair then he ask'd what i was runnin it with and i pointed thru my hatch n said a sundown saz1500. he said no shit?and im the first here in oklahoma other then himself that hes talked to who has any clue what sundown is. and then he says he will be working for sundown audio this summer and i think he said his name is hitman or sumthin....asian guy in his early 20's....is this guy for real or just talkin out his ass

Sundown's website just got a major over taking. Switched over to a new platform. Great looking product pages, FAQ section are just starters for this. Check it out and see what you think! Brought to you by: LFTNdesign http://www.sundownaudio.com

Since my van is known as just a burp vehicle, and I really have been wanting to see what it would in Drive By. For those that don't compete in MECA Drive By is measured with the sensor 54" off the ground and 6 feet away from the passenger door, 30 sec, average no test tones. Mids and highs must be heard. So.... who wants some result?

These subs will be built with used or blemished motors (cosmetic issues only). They do not look horrible but they do not meet my spec for cosmetics. 12s and 15s only at this time ! 15s -- $320 12s -- $305 SHIPPED in Continental USA. At the blow-out price we will be offering simply a no-DOA guarantee (they will be guaranteed to work when you receive them and no more). I do not have very many... so act quickly if you want them. These will have the newest aluminum pole plugs + the new steel spider bolt down rings. They will use a silver 12-spoke frame. * Steel spider bolt down ring. * Silver 12-spoke * Blemished back plate * Another photo

has anyone ever heard just one of these subs in a 350z. i'm thinking about running one off a jl audio 300/2 amp at 2 ohm in my 08 350z.

The next person that paypals me 5 dollars will get the inside scoop on what is going on at the Sundown HQ?

Well guys yesterday was my last day to test before my truck left to go to it's new home. I had big plans of spending most of the day testing; however, that wasn't in the cards. To begin the day my charger had screwed up sometime in the past few days leaving my batteries partially drained. I apologize in advance for the inadequacy of these results, but from my limited testing I learned quite a bit about this driver. These numbers probably don't mean much to you so let me do some comparision for you. In that same enclosure in the same test vehicle at the same power, note this was on a much colder day, the Nightshade is about .4-.5db louder than the IA DP and at 20hz…

can i get to nightshades dual 1 ohm, wire them dowm to 0.25 ohm and run it on my 3500d. i will have about 3 batteies and h/o alternator with 250 amp. in the testing jake did the resistance, and it rose to 0.67 ohms. which they can run @0.5 ohms, right?

Aight I'm planning on buying 1 of 4 custom nightshade 10s that jacob custom made with the blue basket. I wanted to know if this sub would be suitable in a 4th order bandpass enclosure. Also would like to know what's the best frequency to tune the enclosure for daily driver ( I like hip hop music and love the lows lol). I would be using a digital design m1b amplifier to run the sub. Ryan from ram designs will be designing my enclosure most likely but I wanted everyones input b4 I do so. T/S parameters: D2 1500w RMS RE: 3.55 ohms FS: 45.8 Hz Qes: 0.366 Qms: 6.44 Qts: 0.346 Le: 3.25 mH Vas: 5.97 L BL: 23.69 N/A Cms: 59.92 uM/N Mms: 200g

I'm pretty sure I'm ADDICTED..

Check them out... I think he wanted his doors to match his teeth... that is the word on the street.

wow this suck's dropped in my second 3000'd strapped @ 1ohm and only gained 1 db so now I'm doing a 151.7 wish i knew were my lost db went i would be up to 152.7. anyway's lot's-o-work ahead now

Runs on 240v AC -- supplying 260 amps continuous current set to 14.8v Hooked up to some Stinger SPV-70s... need to get one more in there. Should do quite well... this replaces our prior setup of three Pyramid 40-amp units (only one recently as we blew up the other two). We went through those on a regular basis... this should be more reliable and much more power than we had before.

So... I got tired of not going to any shows so I've thrown something in the CRX. Took my "magic box" from the Jeep and threw my prototype Monster 15" in there as it was the only D1 sub I found laying around and powered it with the prototype 2500D. * Stinger SPP1500 under the hood with oval 1/0 Stinger flex wire -- one run power and one run ground to the back. * Upgraded factory ground wire here too. * Got it in behind the b-pillar. SAX-100.4 under the box. * Wire mess with distribution blocks. * Magic box in all of it's glory. * SAZ-2500D is under these boards. Just threw this in quickly with scraps to test. ... drum roll ... * Also did 150.1 but didn't take photo.…

ill b sealin off my trunk on my next project. the new box will b 3.5 cubes @ 35 using 2 4" aeros, the rest of the equipment is n my sig. comments? dos or donts?

Would a 1000D properly power two RockFord Fosgate 15" P3's without straining too much or would getting the 1500D be the better bet? Also, any suggestions on a dual 15" setup for less than $700 are welcomed. Setup is for a friend. Will be going in a Crown Vic.

"This is our upcoming 1250 RMS line being tested free air with nearly 3x their rated power level -- I took it up a bit too far just as an example =) This was taken with a bit newer camera than previously used -- Canon Powershot Elph 16.1MP. The excursion looks a little weird in this video compared to other videos so not sure which camera I'll keep using in the future -- but hope you all enjoy !" From the video caption.

whats up, i was wondering if i could get the recommended cuft for a 15 inch nightshade. the thing is im planning 4 15 nightshades in a wall, but only will have a little over 10.4 cubes after discplacements, so around 2.5 per driver. or do you think i should just do 4 12s in that space, which do you think will get greater output. and this will all be powered by 2 3000ds 2 3800 kinetiks and iraggi 260amp alt.