Sundown Audio

i am interested in a 3 way component system. reason being, one 2 way component system wouldnt be enough for me. i think a 3 way system would be more broader, with a woofer, a vocal mid range driver and a tweeter. i was looking at focals. model 165 A3 from there "Access" line. im not that particular to where i need to hear them before i buy. im sure i would be satisfied. im use to listening to factorys so any component sysem would probably do me good. anybody have suggestions or experience with a 3 way system? and also is the rated rms power totaled between all speakers on each crossover?

so im pumping gas today and the guy at the pump ahead of me seen my sub thru my windshield and ask'd if its the old power hx2. i said ya and he started talking bout he used to have a pair then he ask'd what i was runnin it with and i pointed thru my hatch n said a sundown saz1500. he said no shit?and im the first here in oklahoma other then himself that hes talked to who has any clue what sundown is. and then he says he will be working for sundown audio this summer and i think he said his name is hitman or sumthin....asian guy in his early 20's....is this guy for real or just talkin out his ass

Since the new SAZ-1500d v2 does not have any fuses inside or outside of the amplifier, what is the suggested size for the in line fuse?

as the title says Happy Birthday man hit the big 40 right?

So... we shredded one of my MT 18s last night. Pics coming soon when my camera phone charges up We played the truck almost all night and finally one gave out!

Dont really know what amp to buy im bearly gona start building and was wondering if i should go with the rockfosgate t2500 or sundown SAZ-3500d money not a problem , oh and im going to be running one 15 fi btl havent bought it nether nor sure if to get 1 ohm or 2 ohm some body please help me.

Just looking to find out since I cannot easily see it posted already anywhere... If I get (2) SAX-1200Ds and link them together, what kind of output would I be looking at?? Mainly looking to find out if it is 2ohm stable if linked as well.. Thanks for any help fellas..

Our prior unit had extensive supplier issues to the point where we've just had to write off all of that work and tooling. In any event... I decided to re-visit the X-8 idea and base it on our SA-8 v.2 frame tooling. The first challenge was to make a GREAT spider for a 2.5" coil on an 8" woofer... which is difficult and we used extensive software optimization before tooling. Fortunately our basket allows a spider about 10mm wider than pretty much all other 8" frames out there. Since the spider is the main challenger we had that tooled first and then built up a test bed to test with : * Former was too tall / big in diameter for the SA-8 dust cap to work so I had to use an …

These subs will be built with used or blemished motors (cosmetic issues only). They do not look horrible but they do not meet my spec for cosmetics. 12s and 15s only at this time ! 15s -- $320 12s -- $305 SHIPPED in Continental USA. At the blow-out price we will be offering simply a no-DOA guarantee (they will be guaranteed to work when you receive them and no more). I do not have very many... so act quickly if you want them. These will have the newest aluminum pole plugs + the new steel spider bolt down rings. They will use a silver 12-spoke frame. * Steel spider bolt down ring. * Silver 12-spoke * Blemished back plate * Another photo

I need to add alittle color to the back of my car, so I painted my amps white....What do you guys think? Before After

A few vids ...just messing around ....new one coming this week

I'm pretty sure I have the electrical needed, but what do you recommend? -This is for Sundown Audio, not regular members that haven't owned the amp i am referring to in this thread.

it was time for the MTs to go now time for the new <<<<<<NIGHTSHADES A big thanks to Jacob & Brandon for coming through ....

Some of you may know that I was going to get Sundown X 12s and then decided to get 2 10s because I couldn't fit 2 12s properly since they require a much bigger box and I'm kinda limited on room. I decided to have subs/port facing rear and have my battery and amps up closer to the front and build an amp rack there. I have a box design for the 10s here it is: Sundown recommends a much larger box (1.5-2.0 cubes per 10) to utilize the new surround and suspension. It will get much more excursion then. Also minimum required port area for these 2 10s is 75in2. Well I've been thinking since I have a height of 17 and a width of 34 I could fit 2 15s on the face. However, the…

Went out to another TBP event out in Longview today with the car in 85 degree weather.. 1st run was 151.3 2nd run was 151.2 3rd run was 151.3 all with the mic in the passenger kick. I also tryed port wars, and I've never done it before, but I managed a 165.9 in port wars. Apparently thats pretty high for 1 sub to...go figure ... These amps are astonishing everyone. They are performing flawlessly and everyone wants to know where to get them..I need some brochures Jake...and I need to step up to a pair of 3000D's....hook me up.. I acquired a 18" RE SX today, and I'm planning on building a wall with this woofer, with the trunk as my Infinite Baffle and tearing some stuf…

Pre-ordering NOW OPEN... pre-order runs until July 4th or while supplies last. ETA is the end of July -- as always this is subject to delays and is not set in stone! COST : $315 shipped in the continental USA - Regular MAP Pricing is $375 * Contact me for AK and HI orders * USA ONLY SALE IF YOU ORDER BY the end of May it will only be $300 each shipped in the continental 48 states! TO ORDER PAYPAL ME AT [email protected] with Subject "SAX-1200D Pre-Order" or talk to your favorite online or local Sundown Audio dealer. ----- This is an all new board tooling developed just for Sundown Audio. RATINGS: 1200 x 1 @ 1 ohm 720 x 1 @ 2 ohms 360 x 1 @ 4 ohms ** -- Clamp testi…

Just throwing some ideas out because I want a hat and think other people may as well. This is just a crappy quick photoshop I did to show my ideas, I may make a final copy that blends and actually looks good in the future. Idea 1 Idea 2 Or we could just do the logo without the team above it so anyone could buy and wear it. Feel free to add ideas and discussion.

On the scv and saz amps what style crossover is used butterworth or linkwitz-riley ? Have never seen it said on sundowns specs.

Team Nemesis Scott's Tahoe!!

I have a question. I have been reading that Sundown has two positive terminals hooked up parallel and two negative terminals that are hooked up in parallel. Which has lead me to be confused. (2) JL W7 13.5 (1500Wrms) DVC 1.5 ohm If I wire the woofers as so: And hook just one lead (+) to one (+) terminal on the amp and hook one lead (-) to one (-) terminal on the amp I should come out with 1.5 ohms and approximately 2625Wrms right? (and of course more power since they are underated) And secondly can I just hook it up to one lead and come out with the full power range?

What would be the best box for a Nissan 350Z, I can't decide whether to go with 2 SA8's or a single X8, I will be powering it with an Arc Audio 2500CXL which puts out a little over 1000 watts.

So the single SA-8 v.2 has been doing great for quite a while with the PSI PR but now that production is in and all pre-orders have shipped I decided I wanted to step it up a bit to THREE of them. Derrick came up today and put together a nice box for me for the three 8s using a single 6" aero-port about 28" long or so tuning us in the low 30s. Box is constructed of a single layer of 3/4" Russian Birch plywood. * Yep... that is a LONG port. * Inside view -- just a basic box with all the giant motors hanging out. * Sealed with a bit of silicone. As we may be tweaking some more I just ran the wires through the port for the time being. * In the car. * Bit close to the…

Hi its Max here Just wondering - is there a website for SA amps or somewhere where I can see pictures? Please let me know. Thanks

Through them in a box I had laying around the shop yesterday. They are being powered by a pair of saz-3500s @ 0.5ohm each. Vid. Got my new box built today. It works MUCH better. Because I had to move the amps to the back of the truck my rcas weren't long enough. Using some y-splitters as a ghetto extension I was able to get one amp going. With only one saz-3500d @ 1ohm on both subs it hit a 149.1 on the TL. Did the same exact # playing some music too. More vids tomorrow.