Sundown Audio

i have a sa-8 d2 and i was wondering what box would be better. I am going to buy a pre-fab box and don't know which one would be better have a amp running 300 watts rms. just wanting the best option, which one should i get and why? i know it likes a ported box from .6 to 1.25 one is .80 net box so .70 after displacement. this one mentions a 40" port is that good or right for this woofer? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230527532374&ssPageName=STRK:MEWAX:IT and the other is 1.10 net and 1.00 after displacement http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350398128241&ssPageName=STRK:MEWAX:IT

Happened alot faster than I thought... but the first run of motors is totally sold out as of today. If you have already paid for one you are fine (I saved yours too, Fabio) -- just did inventory this morning and we cannot sell any more than we already have. It will be a few months for more as I had to get a huge amount of amps started before the MOSFET shortage hit and also had to strengthen stock of the better selling SA line first. I will make a post when they are available again -- of course parts and re-cones will remain available the whole time. Just no new units until we get motors again.

hey jacob, i sent u an email like friday night or saturday morning, and i know your extremely busy, but i am extremely impatient with my first big build lol, so i figured id post here and maybe somebody else might be able to help too. i was just wondering if the recone plus basket was still $165 shipped? if u could get back with me on here or email that would be great. thanx.

Hey guys I have started a new build and have been taking some pics along the way! so i thought now it was about time to share some pics of what i have thus far! at any rate please let me know what you think, if you see something out of place please ask! this is also my first time building a box like this! it was fun! kind a lol. other then that I will be sending my 2 motors out for a 12inch recone some time very soon! I will share pics of my shipping box's (tomorrow)! I hope you guys like them!

hey i need to get sundowns address including zip code to give to fed ex b/c they need to know it so i can start a claim to find my amp that was shipped and someone other than the company that i shipped it to signed for it and it has dissapeared......

To order any of the below items please PAYPAL us at [email protected] along with an order list (be specific) -- be SURE to have your address on the payment! You can also order from your favorite local or online dealer -- all dealers have the option to provide these sale and pre-order prices as well. This sale is for the USA ONLY!!! Prices below are shipped in the continental 48 states -- contact us for shipping quotes to AK and HI. The below pre-order items are due in December... could be anywhere from early to late December. This is the ETA -- as with all pre-sales the possibility exists for delays and there will not be ANY refunds. So please do not pre-order un…

I'm not trying to be rude or anything, I'm curious. What is the difference from the SA-8 SA-10 SA-12, and SA-15 they all can produce about the same db 150 ish single sub. I'm wondering because I just bought a SAX-1200D amp and I was going to get the SA-15 but now I'm unsure what to get. I'm looking to move some air.. Thanks in advance.

Hey guys does anyone know off hand how much the sa8 cost? Ifound a guy selling them for 95$ but they are reconed sa8 which isn't a big deal to me but I was wondering howmuch a bnib sa8 from sundown would cost Thank Kenneth

Im either wanting to pre-order the saz-1500d v.2 in the next day or two for 400$. Or I was looking at the Saz-2000d in the B-stock Refurb section for 400$ and have a little headroom. Power is going to an XCON by the way. Any input is appreciated.

My (2) SAZ-3500 get hot, really hot. Is this common in this amplifier? My Voltage stays around 13.5 on full tilt, and sometimes it'll go to 12.7 on long continues bass notes when on full tilt, when not on full tilt it's 14's. I got a 320amp Alternator from DC and (4) XS Power D3100s as secondary batts. Thanks Jacob

Congrats go to Luz Carter, Team Sundown Audio/Image Dynamics in the MECA SOUND QUALITY Stock class format. She went undefeated this year and pulled off State finals by a close 1/2 point. Sundown isn't just for the knuckle draggers anymore. lol

Right now I'm building a new box for one 8" sundown Sa-8 that I'll be using until I get another 1 or 2. My current box is tuned too high for my liking. How much square port area is recommended for these subs? What is the lowest you would recommend I tune the box to? Right now I'm tuned to 34 hz, between .75 and .85 cubes after displacement by messing with some dimensions, with 13 inches of square port area. Is this enough for one Sa-8? I don't want to make too big of a box for it per Jacob's recommendations. Thanks.

Jacob, whats the airspace requirements on these? and when will they be available. Im looking to upgrade my 4 sa8s with 2 10s. would like to use the Nightshade v.2 if possible. im trying to be louder than now but i have only 2.5 ish cubes and lots of power.

Here you guys go...Loud as hell! Moves some serious airrrr Another one....Look at that b-pillar! Also I FAIL at camera taking because I had to use my i-pod and in order for it not to be in landscape i have to hold it VERY awkwardly... Jake, expect to hear from me in the near future about some certain things....

Can't seem to find the info anywhere. What diameter coil do you use on the SA-10?

I finally got to put power to my pair of sa10 subs. I have 2 wired to 1 ohm in 2.5 cu ft net tuned to 32 hz with 40 sq in of port. They are running off my saz-1500d. And are taking it no problem. I only have about an hour of play time on them. So we'll how much they loosen up. So far I'm impressed. I'm coming from an re sx 15 in 4.2 cu ft net tuned to 32 hz running @2 ohms off the same saz-1500d. They are a little louder than the sx15, but night and day cleaner. They hit so much tighter than the sx. Rock and metal are enjoyable again. My current electrical is seriously lacking and I've got some bad voltage drop. So I know there is more in them. Over all I'm very happy wi…

I have a 18 inch btl on a hifonics 2400 right now but I want to get a saz3500 for 2 15 btl later on but if I get the saz3500 now and put it on the 18 btl wired at 2ohms will the sub be ok?

Hello i live in alpena mi and we have a business here and they claim to be a authorized dealer... they said the samething about alpine and they were not a direct dealer and they go through another dealer to get there supplys and now they carry sundown... so i guess my question is if any one knows if they are a authorized dealer or not that would help out a great deal...

I have a Sundown Audio Nightshade v.1 12" sub dual 2ohm coil's. I was wondering what is the process of getting it reconed? How long does it normally take? And how much is it to be done? Thank you very much for your time and great products. Also is there any options to upgrade it any? And how much would those options be. And are they worth it? I have a sundownAudio SAZ1500d for amp. Big three done and tons of zero guage wire also running second battery.

2001 Ford Excursion 24 Sundown sa-12s 6 Sundown saz-4500s

ok, so i have a nightshade 18 now, but i am thinking of switching to 4 SA-8s. i would have slightly less cone area (201 vs 254) but wouldn't i also have a higher amount of motor force and air displacement because of the added xmax of 4 woofers vs 1 woofer? what do you guys think? on the 1500 watts im running now, what would be the better route? im really just going for daily listening, i don't compete. there is also the wow factor of popping the hatch and saying "yea...those are 8s" but any input is appreciated. also, please don't flame for this being another vs thread, im really just trying to find the relationship between motor force and cone area.

Hey Guys. Well, I traded my SAZ-3500D and got 2 SAZ-2000D's. Here is a pic. It is hard to believe all of that is in my spare tire well. Each amp is wired to each Sundown Nightshade 15 dual 2 ohm at 1 ohm each. Little SPL Box. Hoping to do a 151+ at NSPL World Finals tomorrow.

Hey guys i was going to cut out some holes today and i was wondering if anyone knew the cutout diameter for a 12inch NS v1 I was thinking off hand it was something like 10.875 (7/8 = 0.875)

The SA line is mostly sold out right now... we only have SA-10 D4 in our warehouse at this time. We have more SA-8s both ways and SA-10 D2 due in 3-4 weeks. We have all other SA sizes and configurations in large quantity due in November. ----- Our distributor in Iowa, Top Dog Audio, has some SA woofers in stock. WoofersEtc.com also has stock on most configurations of the SA line right now as well.