Sundown Audio

Well I finely went out and worked on the van, I haven't touched it since this weekend. I pulled the sub out that I knew had problems.

I want to put a 3000 per pair..... But i'm not sure how they will handle the 1500 rms each. Any better ideas?

Fred Dietrich’s 2009 USACi SB4 World Champion Explorer Rebuild Previous Setup: 12 Kinetik 2400’s 2 Sundown SAZ-3000D’s 4 Digital Designs 9515D2 World Finals Score 156.5 on Eminem’s Go To Sleep USACi 2009 Finals Results New Setup 9 Sprinter S12V370F 8 Sundown SAZ-2000D’s 4 Crossfire XS 15D2 World Finals Champion Repeat: Priceless

I was just wondering what it is, and 1w/1m, or 2.83 volts? thanks

A buddy of mine gave my brother a free E8 that he thought was blow, the former was just bent. So we fixed it and it works great!!!

Well, my Nightshade bit the dust about a week or two ago, and I'm just now getting around to posting it. I'm not 100% positive about what happened but I want to run it past you guys first and see if I need a Recone or a new sub. I was pounding like I usually do on my way to work, and it was incredibly loud. As in louder than I've ever heard it before. Anyways, in my 15 minute commute to work, I had pulled up in the parking lot and just as I did, the sub stopped working. Wtf...? I wondered to myself and probably said aloud. I pulled into a parking space, and popped the hatch and there was smoke rolling out of the port. I quickly managed to lift my box and get the sub out.…

I'm not trying to be rude or anything, I'm curious. What is the difference from the SA-8 SA-10 SA-12, and SA-15 they all can produce about the same db 150 ish single sub. I'm wondering because I just bought a SAX-1200D amp and I was going to get the SA-15 but now I'm unsure what to get. I'm looking to move some air.. Thanks in advance.

So here are the plans for my second audio upgrade I have a 2010 xb that i've self taught everything from engine work to visual http://www.flickr.com/photos/djfrozone/ Pics relevant. Here is my current setup Pioneer AVH p4100dvd RF Prime R300-4 Visionik 350 mono Infintiy 6022i 103t tweeters RF p1-110 sub wiht factory box. Ebay wiring amp kits i found and yea. I'm looking to do it right this time. The RF i have is a nice sub. clean sound, but nothing to write home about. it wont make u go "well shiiiiiit" I heard about the SA-8 from a friend on Scionlife. saw a video of it in a lil CRX and decided that is more than enough for me. not triying to win shows. but at times i j…

Went to get my brand new SAZ 1500D installed today but when they hooked it up it wouldn't work. The amp turns on and gets hot but won't play. They took it out and put in a jl amp and it played great. They also hooked the amp up to some machine (forgot the name) to see if it would work and nothing is there anything I can do or do I have to send it back? Oh and I'm running 1 12" fi bl in a 2 cuft box tuned to 35.5 hz with 0 guage wiring

I have no idea if it has any value at all but back in december i posted my nightshade v1 motor the top slug had cracked in half and locked the sub up.. If anyone is interested in buying this let me know.

I have 2x SAZ-1500Ds that are used. These amps carry full warranty coverage from your date of purchase. They are very lightly used by Team Sundown members. They are 9/10 on a bad day cosmetically, all look the same with pretty much only minor mounting foor wear. Yes, the logo is upside down on one of them... it is reversible so you can change it back. These are $450 each shipped to the continental 48 states.

For sale is a cosmetically damaged Sundown SAZ-1500D. This amplifier is fully functional except for the remote input. You will NOT be able to use the remote as the port was broken off in transit from the factory, along with cosmetic damage to the end panel as pictured: Price is $350 shipped in the continental USA via Paypal.

Up for grabs is a pair of 10" Sundown SD-1 subwoofers. I used these briefly for testing purposes, they will come with full warranty as they are very close to new. They do have speaker wire soldered to the terminals, though, pretend it's "direct connect" like DD Price is $125 shipped for the pair in the continental USA. These are GREAT with an SAX-100.2 to power them. I am running a pair of 10" SD-1s in my 2002 Civic if that tells you what I think about them

For sale. One SAZ-1500D, brand new in box. This unit has a blemish on the finish, but is otherwise brand new. I inspect each one before it goes out and caught this one: $475 shipped in the continental USA. This amplifier carries full warranty coverage.

Fully tested down to 1/2 ohm each. Both were mounted and used and show a few signs of use on the mounting feet and near the speaker connections. Both come with remotes but no manuals, you can download the manual here: http://www.sundownaudio.com/products/SAX-1...manual_0607.pdf The white dot in the picture is from the flash and is not a mark on the amp. $475 shipped each or $900 shipped for both. They come with the full warranty from date of purchase.

This SAZ-1500D was shipped out for testing purposes and then shipped back to Sundown Audio afterwards. It looks pretty much brand new, although it is used so it has some finger prints and whatnot on it. This amp will be covered by full warranty from the date of purcase. $425 shipped in the continental 48 states via paypal

Just got off the phone with my local machine shop... looks like they can make the copper tube I need @ 75mm long x 74mm ID x 76mm OD Also looks like I can get a 77mm diameter coil former from Precision... and that I have a nifty motor here already in stock with a 40mm tall top plate. Can anyone guess what I'm doing ? Hint : When I'm done with the first one it's going in my daily driver.

dgnHnJ2PuAQ Check it out

I know sundown recommends a fuse 8 inches before their amp.. I was told once before 150A is just fine... Im running the knukonceptz 1/0 KLMX cable (250a).. I started talkin about this to some other people off the internet and they keep tryin to tell me its way too much lol.. i think their full of it cause they also tell me 1/0 is overkill for any system lol. just want some clarification on this, thank you. Amp will be mounted maybe 1.5 ft from back battery and wired directly to it with a fuse.

Hi, just need a quick answer before I go buy it from the store. I have SAX 100.4 just brought it, using 8 Gauge 4 Channel Amplifier Installation Kit from knukonceptz.com and it use 50a fuze size for the inline power, can I use differe size cause I need it fast it shorted. best buy or walmart doen't have 50a size only 60a or 80a fuse.

Due to your high-end products, I'm wondering if there are any production ideas involving multi-channel amplifiers a year or two down the road. Possibly a 150.4, 200.4 or maybe even a 5 channel? If so I would be greatly interested!

im sure its been asked before but im about to strap my amps today... so do the gains need to matched or does the master control gains for both amps?

alright, can i set my remote gain to where full remote gain is peak for me. by setting the amp gain low, and having the remote gain hi will that mess the amp up or send a clipped signel i know with the hifonics you can not use the remote gain as a volume knob for the amp, but the hifonics remote gain for the goliath is a input adjuster, so it raises and lower the input signel, i wanna make sure my sundown can dothe job or not also jacob i got no sundown swag with my amp.... can i get a sticker or somthing:D and a flyer,

anyone know where i can get the gain reduction knob for a 3k? and how much it would cost?

As many people know Argent Audio is now in Morgan Hill so it is only natural to have someone in Gilroy, Ca!!! Cellular Universe And Cartunes 190 Welburn Avenue Gilroy, CA 95020 (408) 846-6440 They are great over here! They are the only shop in my area I trust with my personal cars so far! Andrew