Sundown Audio

Built for a dealer... NS cone is standard on 18s. They went with 3 spiders and dual leads as well. Just a very short break-in period. RE: 3.55 ohms Fs: 35.5 Hz Qes: 0.534 Qms: 7.341 Qts: 0.497 Le: 2.66 mH Vas: 90.04 L BL: 24.556 NA Cms: 49.32 uM/N Mms: 405 g Sens: 90.6 dB 1w/1m

Everything was working fine last night. This morning i turn on the car and i can hear static coming from the woofer. I figured it was the subwoofer coil rubbing or something. Well i try 2 other subwoofers and i get the same result. Everything seems to work fine except there's static that kind of sounds like rubbing styrofoam together. I tried everything to rule out other components and still the same result. Strangely enough the amp works fine apart from that. So i have no clue what to do now. Do i just send it in to get repaired or what? I never thought i'd have any problems with it. Any help would be appreciated.

So i bought a 100.2 about 9 months ago thinking it was time to start my system, well things got hard and it became a paper weight. But i recently sold it. =( but today i was informed that my new 100.4 and 1500D Came in the MIAL!!!! So i have a present waiting for me when i get off work. MY DREAM SYSTEM, which is in the works consists of: Headunit Alpine IVA-w200 (with 30gig fullspeed ipod) Front Stage Sundown Audio SA-100.4 Hertz custom matched mids and highs. 1 set of HV 165L / 6 1/2" mids 1 set of HT 25 tweeters 1 set of 2W20.3 crossovers 1 set of Hertz HCX 165 coaxials for the rear Sub Stage Sundown Audio SAZ-1500D Digital Designs 3515 Electrical big 3 with 1/0, kinet…

im fitting my FiQ 15 bp and sundown saz 1000 this sec its 2.3^3 box sealed, was just wondering a rough guide line to set my LPF, Subsonic, phase at? listen to rap, thanks

Ok Dj whats up i've seen them somewhere else why not here? i'm not telling tho.

Came down with a cold over the weekend so I'll be a little slow for a few days while recovering -- if you receive an email that makes no sense it's the cold medicine so just write me back and let me know you need clarification

I finally got the amp installed and I have to say I am VERY happy with it. It is clean and crisp. I am rinning 4 infinity kappa 6.5 2 way speakers. I got the shipping conformaton on my saz100d so it will go in next week. I just wanted to drop a line and to say this thing rocks. Anyone wanting to step up their system but dont want to go real big this thing is perfect. It was way louder than I expected. Good job Jacob.

A few Sundown guys at the show today... Big Al with 2x SAZ-3000Ds @ 0.7 DCR each un-strapped running on only two Kinetik 2400s + starter battery... powering 2x Kicker Solo-X 18" subs in a daily-tuned listenable, beautifully done, fiberglass box. All in his Cadillac Escalade. Honestly don't remember his class designation... believe it was truck/suv 25 - 48. 150.9 dB today! He has 2 more SAZ-3000Ds and more batteries going in soon. Each 3000D will be seeing 1/2 the impedance that the two from today were seeing. --- My brother, Adam Fuller, running 2x DD 9510s D4s @ 1 ohm strapped (1/2 ohm per amp) on 2x 1500Ds on stock electrical + a DEKA Intimidator in the no-wall 0-24 cla…

Hello all, Im doing some research into Sundown Audio and would like some Honest & Unbias opinions on their producs, service, warrantys etc .... Any and all opinions are welcome good or bad I would like to hear them thanks

These are from Derrick's Explorer : Starting battery + 2x Powermaster D3100s used for testing 3980 @ 0.25 rising to 0.65 @ 11.2v (engine on) 2050 @ 1 rising to 2.44 @ 12.2v (engine off) ----- These are from Ray Farmer: Okay, I have done my SAZ3500D 12volt power test. I would like to say, WOW!! My nominal ohm load was 0.5 ohms. I did plenty of test but I got the amp to do its power at the proper settings and did 3 test and took the average. I used 2 x NSB-g3100 to power the amp, Starting voltage 13.2 Test 1 75.1 volts 39.9 amps 2996.5 box rise 1.88 voltage drop 12.2 Test 2 75.1 volts 37.7 amps 2827.5 watts box rise 1.99 voltage drop 12.1 Test 3 76.0 volts 39.5 amps 3002.0 …

2 days ago i replaced that old, OLD pioneer head unit with a clarion flip out(vrx765vd) but im unsure as to where i put my amp rca's, i mean it has like 4 pairs on the back of the head unit.....right now i have it on "non-fader output terminal" should it be on "rear audio output terminal"? it also has "front audio output terminal" which i didnt use for obvious reasons.......sorry for the newbish question....but this was my 1st reciever install!!!!! oh, and the box in the vid was a first too....got anxious so i didnt sand/paint/carpet anything but honestly i kinda like the "raw" look.....besides the glue smear lol also another question, if i may.......do you think interna…

Hi, just need a quick answer before I go buy it from the store. I have SAX 100.4 just brought it, using 8 Gauge 4 Channel Amplifier Installation Kit from knukonceptz.com and it use 50a fuze size for the inline power, can I use differe size cause I need it fast it shorted. best buy or walmart doen't have 50a size only 60a or 80a fuse.

i was just wondering what the typical output on a 100.4 will do at 2 ohm. i have 2 sets of re xxx comps and i wanted to know if this amp will supply enough power to them

All specs measured after a short break-in period. Specs will vary slightly from unit to unit and with further break-in, as with any subwoofer, but these specs are accurate enough to model up your enclosures. 12" Model D1 Coils: Qts = 0.40 Qms = 6.83 Qes = 0.43 Fs = 43 Hz VAS = 11.7 L Le = 1.4 mH (series) Re = 1.59 ohms (series) BL = 17.6 N/A 12" Model D2 Coils: Qts = 0.44 Qms = 9.36 Qes = 0.46 Fs = 41 Hz VAS = 11.7 L Le = 3.0 mH (series) Re = 2.92 ohms (series) BL = 22.8 N/A 15" Model D1 Coils: Qts = 0.48 Qms = 9.33 Qes = 0.51 Fs = 40 Hz Vas = 36.7 L Le = 1.36 (series) Re = 1.44 ohms (series) BL = 15.27 N/A 15" Model D2 Coils: Qts = 0.44 Qms = 8.64 Qes = 0.47 Fs = 38 …

i need some help. im using a sundown saz 2000 and i cant decide what subs to use. fi bl 16s or the nightshade 15s. im having a box made for which ever i decide and theyre goin in a focus hatchback....no wall tho

The camera didn't pick up the sound very well. Mic was placed on the dash on the passenger side. This was taken with an RTA but mine reads .1 lower than the local TL. So I believe this to be accurate. Peaked at 53Hz. Box is tuned at 40Hz. HzznT2SlpUQ

first show with 1 1500d and 1 10" in a 02 eclipse did 145 @ 47 hrtz. it was third loudest of the day and I won my class. i had problems friday so I did'nt get to use both 1500d's and did'nt build a spl box. oh and my camera got left @ home so I will post a link for dbdrag result's when they are in. i got beat by a blazer with 2 old w6 15's and 2 dei 1100d's. and a chevy extreme with 4 9515's and 2 6500's. wish i got to use both 1500's think I could of done 147-148 easy

Hooked up my 100.4 today to SEA excel mids and morel supremo tweeters. Gain was set at half, headunit (pioneer 9800) volume was 42/60, and 12 db slope, and it blew them in one minute. Now the speakers are rated at 220 watts. It is a 6 ohm speaker but i was told it would run just as good with this amp and actually be easier on the amp. I checked the speakers after they blew with others and and i still got power from the amp. Any ideas?

ordered a saz1000d to go along with the 15q i just ordered. CAN'T WAIT.

Hey guys -- I am behind on emails... not ignoring anyway... will take me several more business days to catch up.

Is this (2 saz-4500) too much power to put on 4 15" Fi BLs?

packaging looked perfectly Jacob, not a mark anywhere on the amp boxes.

This is the "official" post to be linked in our sticky amp power testing post : ----- This testing done on my Extech True Power meter a full 6-10 seconds in to the burp so we are not catching peak values: http://www.extech.com/instrument/products/...399/380976.html ----- HIGH VOLTAGE TESTING: 6x Powermaster D1000s used for testing 17.9 volts rest - did not measure voltage drop. 10,320 watts from the pair @ 1.5 ohms each after rise starting at 0.5 DCR 5160 each 11,470 watts from the pair @ 1.3 ohms each after rise starting at 0.5 DCR 5735 per amp ----- 12v SYSTEM TESTING: Starting battery + 2x Powermaster D3100s used for testing 3980 @ 0.25 rising to 0.65 @ 11.2v (engine o…

I Dont Really Understand how to bridge a Dual 2 Ohm Speaker, On My Speaker I Have Positive Crosing Over To Positive And Negative Crossing Over To Negative (1 Ohm Load) Like Shown How Do I Hook This Up To The Amp? Because The 2 Outside Terminals Which are Usually Positive Negative Are Positive Positive

I have an 01 firebird and Im looking into getting a ported box built for a single SA-8 D4. There is a space in the driver side trunk area where the factory cd changer used to be, im hoping to use this space. I will not be competing in anything, just want it to sound good for daily use. What size should the enclosure be, port length and what should it be tuned to for everyday use. If there is any other info I need to know before bringing it to the builder, Im all ears. Thanks,