Sundown Audio

JOSHUA SPARKS BENEFIT BASH JULY 24, 2010 2768 DECKER BLVD. COLUMBIA, SC 29223 Joshua is a special four year old who has suffered thru more surgeries and procedures than most of us can imagine. A group of friends (Calling All Friends Foundation or CAFF Calling All Friends Foundation ) has formed and banded with many other friends and friends of friends to show support to Joshua and his family. This is the son of Brandon Sparks, Jacobs only employee at Sundown audio. Joshua was born on November 15, 2005. Shortly after birth it became apparent that something wasn’t right. He was diagnosed with a congenital heart defect called Tetrollogy of Fallot with pulmonary atresia. Basi…

Ok where to order my sa 8s from ? SSa store? and can somone tell my the speaker displacement of these? Thanks

Does the saz1500 have a signal output, so you could run rcas from it to another amp? I'm thinking about getting a smaller amp for mids and highs and wanted to know if I would have to run another set of rcas from deck? Or if the saz could output it. Thanks

I was just wondering if I have 2 sa8 on a saz1000 wired at .5 ohm will I be getting 1000 actual watts to the sub? I have a 250 amp alt, and odyssey pc1750 battery

Well I was part of the pre-order and been having all my equipment for a while. I installed it about two months ago and I'm just getting a chance to post some pictures. I am not completely satisfied with the box. I wanted to get something made quickly so the woofers weren't just sitting around. I had a local box builder build it and he built it to fit under the seat. I told him I want the optimal box so if I needed I could raise the seat but I guess he figured he would work with what I already had. My buddy has two of these on the same set-up and his box is almost twice as loud. My box size is .667 cu ft w/o the woofer displacement (i didn't know it) with a port size of 1.…

Called my shipping company and they say I should have my pallets on Tuesday -- would be sooner but Holiday closings are delaying it a bit. So... we'll be shipping as many amps as we can next week, hope to have pre-orders cleared out by Friday next week.

What the minimum and maximum voltage u could run...say a 100.4...or 4500d...what would be the safest for a 16volt system for a 4500d?

started on the rebuild thought i would post. this is going to be my new SQ build, hoping its going to sound good. parts list sundown saz-3000D sundown sax-100.2 2 runs of KCA Kable 1/0 Ultra Fleks Blue CCA Power Cable 50' spool 2 Karma SS 2 Channel 6 Meter RCA Cable's a set of Polk Audio MMC6500

Trying to wire up now- not worried about what ohm to wire it up to got that i got 3 and i am wiring it to 1.33 ohms and i was gonna just use the wire terminal as a jumper to get the neutral and power wire to the other subs like 2 wires on the terminals on 2 of the subs and the last sub will just have 1 wire into all the terminals because i dont have to jump it on the far end so my question is can two 12 gauge wires fit in one of the terminal in the sa8-- if not would it be better to run a seperate run for each speaker to where the wires are coming into the box- or would wire nutting them and getting a good tape job be good enough cant wait to try these out-to make su…

Built a pair of drop-ins for a customer so I took a few shots. Yes... we stock parts even for our 2" coil drivers - I can't stand to see sub motors get thrown away (hang on E8 v.1 guys... working on updated parts for those). * Top triple joint action - we assemble these ourselves so it's all done with heavy duty CA glue like the Z v.2 and Nightshades. * Side view. Surround is a little bowed from sitting in it's shipping box, the cone is straight no problem * Rear triple joint support ring in place like the bigger SA woofers. * Your SA-8 make a ticking sound at high excursion? Guess what ? It moved about 28mm rearward and your triple joint ring hit the top plate. Need…

I'm pretty sure I'm ADDICTED..

jacob, i sent you an email about this, but you're stacked up on those. can i get a set?

I bout an SAZ 3000D a couple months ago off a guy. Paid 550 for it. i dont know how much warrenty is left on it. Amy way i could find out? serial number maybe?

Need help on deciding which amp to choose to run my 2 - sa8s?

We still have them in stock after filling pre-orders. I also have more 12s and more 8s coming in 3 weeks or so.

Originally posted by Greg Kashin (Sundown Russian distributor) on my SMD Forum : --------- More good news from Team Sundow Russia!!! :clapping: Had to share this... the car belongs to Evgeniy Naumkin who's a regular competitor in local SPL comps. He currently holds the national record in IASCA Stock 1-160 with 152.8 with his old setup. In his quest to break 153 he got a Sundown Audio z12 v.2 d1 sub to replace his well worn Soundstream SPLX. This is his old setup - a quick rundown of the system: 2006 Subaru Impreza Wagon sub - one Sundown z12 v.2 d1 with NS cone and spiders amp - Stetsom 9k2d batts - Hawker 300 under the hood and 400 in the back just one run of + and - 0a…

I've talked to him alot about this setup... putting the rear deck back in, metal and all (it bolts in an out), has only a few tenths effect on the score so this is a REAL trunk build. It has done as much as 153.1 dB to date -- on the dash. And 152s at the head-rest... in the 40-44 Hz region. Scores done with seats locked in the upright position. SAZ-4500D is wired to 1 ohm. I'll get him to send me some pictures of the scores when his internet is back up -- and videos too. They are stock SA-12s straight out of the factory box. No modifications to them.

* 8, 10, 12, 15 left to right * 8 and 10 * 10 and 12 * 12 and 15 * Close-up of SA-10 cone / surround --- 15s are not yet available... likely will be around end of the year.

I always assumed that the 1000d had 3 - 30 amp fuses like alot of other Zenon 1000d's , but the web page says 3-25's , is this a type o, or does it have 3 - 25amp fuses

So im happy to say that ive made up my mind and instead of squeezing 2 HDC3 15's in my truck im gonna go with 2 nightshade 15's since they like smaller boxes. My question is when are they going to be back in stock in the ssa store and are they gonna be the v2 or v1 or both? Has there been any word on how much the v2 is gonna cost?

Sold the last of the SAE-1200Ds today and this line is now discontinued. The SAE-1200D v.2 made big strides in reliability vs. the v.1 model but still does not quite live up to the standard set by the SAZ/SAX series amps in my mind. It was a tough decision as we really wanted to offer a lower cost line but at this time it is not fitting into my plan for Sundown Audio. I've spent alot of time thinking about it and had not made my final decision until today -- I had made plans to introduce matching multi-channels but these plans are now halted. I think the change will be for the better as we can concentrate on our core lines, the SAX and SAZ amps. The SAX-1200D is only slig…

I know i had this bookmarked but i cant find it. heading to get the mdf right now, hopefully someone will answer while im gone. have 4 SA-8s, need displacement for the sub itself. also if anyone has any links for box designs, would help with time.

i got this sundown audio E8 with coil rub and i was wanting to know if sundown made a recone and if they do how much?

I just wanted to say Happy Birth Day to Jake. Don't stop being awesome. Great Customers Service and product. Have fun.