Sundown Audio

I always assumed that the 1000d had 3 - 30 amp fuses like alot of other Zenon 1000d's , but the web page says 3-25's , is this a type o, or does it have 3 - 25amp fuses

I know i had this bookmarked but i cant find it. heading to get the mdf right now, hopefully someone will answer while im gone. have 4 SA-8s, need displacement for the sub itself. also if anyone has any links for box designs, would help with time.

I just wanted to say Happy Birth Day to Jake. Don't stop being awesome. Great Customers Service and product. Have fun.

The Z v.2 woofers are back in stock. There have been a few revisions made : 1) The top shorting ring has been removed -- but the internal ring was upgraded from aluminum to copper. 2) The coil windings changed from 4-layer flat aluminum to 4-layer round bifilar copper -- this lowers Fs a bit and I tested no loss in efficiency at lower power and a small gain at high power. Coil is a bit more robust than the aluminum was as well due to additional mass. Copper also has a lower thermal expansion to accommodate the Z v.2 tight gap. All in all it makes the driver more tolerant to abuse. --- We still have the 4-layer flat aluminum coils to match other subs on re-cones... also, t…

Sold out. Unless you have talked to me in the last day or two and a deal is in the works no more are available at this time. ETA for more not yet set.

I think I already know the answer to this question, but I have to ask just to be 100% sure. Does the SAX 100.4 have balanced differential input? I got a new car, and I don't want to mess with the factory HU - which outputs balanced differential. So, I need an amp that can handle this, or build/buy a converter. I have a SAX 100.4, so if this won't work, what brands DO accept this type of input? So far, I've found the JL Audio and Rockford both have amps with this input. Any others? Anyone have any luck interfacing with the HU on a 1st gen Acura TSX?

Yes... "Blownest" may not be a word... but I think it needs to be after seeing this woofer. I do not know who this belonged to exactly but Nick @ SI is re-coning it at my shop today so we thoroughly documented the carnage. Just had to share. * Thats not so bad, right ? * Well... that isn't normal. * Back of the surround should be gray. * Melted material and discoloration on the pole. * Wow. * Kapton wrap of the former is melted and puddled up on top of the triple joint. * That used to be a plastic former cap from under the dust cap. * The solder actually re-melted... * Some of the solder formerly from the connection point * That should be black. * Insider of…

so im buying two e8s from a friend for 50 dollars but the tinsel leads are messed up. how much to get them fixed? they guy im buying them from talked to jacob and he said he would do for free just to pay for shipping but i was wondering if i could get a quote. idk if you guys are still going to cover them after so long of them not being fixed.

And well, i will let the following photo say it all...... The car has 2 x Sundown 4500d's Strapped at 0.35 - 0.175 per amp Measured output across the pair 105.3 volts 121.2 amps = 12,762 watts output - or in laymans terms "a ****load" Battery was dropping to 10.5 volts as well! I do not condont this sort of abuse - one of the amps was going into protect which is something i need to investigate further, however whichever way you look at it - 6.3K from a 4.5k amp with no engine charging the battery (StreetMax) is pretty awesome going. I feel i must also give some of the credit to the DC LV 4XL SPL motored subs, as they seem to be standing up to the abuse very well so f…

I know u dont recommend to run the SAZ 1500 @.5ohms but if I do do I have enough electrical? I have one deka intimidator (55 a/h) under the hood 2 runs of 0/1 to the back to a data safe (100+ a/h) and 2 105 amp alternators big 3 what do u think?

So,, how do i get on team sundown? what are the requirements? let me know please i would like to be a part of it.

A buddy of mine gave my brother a free E8 that he thought was blow, the former was just bent. So we fixed it and it works great!!!

Bolt down ring is done for the next production run that will be on it's way to me shortly. It sits on top of the spider insider of the top lip on the frame and bolts in from the back - this way the cone can't come down and smack the bolt heads.

Anyone have box design for 2 sa-12's per Sundowns specs......ported. I'm new to this. Hoping to build the box myself.

how do you guys figure out how long an external port needs to be? is there a website or program i can plug numbers into? im using the box calc. from "torres" and plugging in the external port numbers doesn't change tuning. please help, thanks

im gonna be ordering new subs in the next 3 weeks and wanted to know what will be in stock, preferably 12 15 or 18s

Jacob I need you to review this electrical for use with 2 saz 1500's strapped at 1 ohm. 180 alt 2 batcap 2000.

They are at the last hub before arriving to me -- the scheduling desk at the trucking company told me I will have them tomorrow. Should ship most if not all of the ones on order by Friday.

I am discontinuing the SAX-50.4 and the Sundown Z15 Woofer. Paypal me at [email protected] to order. The SAX-50.4 close-out is also available at any authorized dealer -- the Z15 close-out is only available from me directly. ---------- SAX-50.4 -- $200 shipped in continental 48 states I will still include a 2-year warranty on these. Most customers shopping for an amp at this power level are more concerned about $ to watt and less about crossover flexibility. So we are closing out the 50.4 and will be developing a less expensive model to replace it without as much crossover flexibility to offer more watts per dollar. ---------- Sundown Z15 D2 or D4 -- $250 shipped…

I was wondering if the are in stock. I need some for my new build but someone say they where out of stock.

After nearly four years as our best selling product (our first Class-D on the market for that matter) the SAZ-1500D is being re-designed. Everyone knows and loves the current model as it is a powerful, reliable, work horse of an amp but we have been quietly thinking about what to do in order to make a fitting replacement for a while now... I think that everyone will be happy with where it is going Details will be sparse right now but it is going to shrink about 1.6" following our trend of making amps that are more powerful per square inch (SAZ-2500D and SAX-1200D especially). We are also looking into removing the internal fusing as well -- that was very commonly reques…

Two quick questions that are really easy but i can't seem to find. Is the remote that comes with a SAZ-3000d for bass-boost or gain? I think it's for gain but i want to be sure before anything bad happens. Also, i have read what to set the Subsonic filter too, but what about the Low pass? Is it just a "whatever sounds better to you" thing? Or will setting it too high hurt my Sub? thanks!

So, I reinstalled all my equipment last night in my vehicle (4SA8's on a SAZ-1500D) and starting hearing this really odd tingy vibration. I immediately freaked out and thought that I blew a sub or subs. I localized it to one sub in particular and noticed that when I pushed down slightly on the dustcap that it went away. I've never had anything like this happen before and was clueless. After a sleepless night of worry and kicking myself in the ass repeatedly, I sent Jacob an email this morning around 9. I was walked through several things to look for and after a few emails, he told me to do the loctite tutorial. I've just got done doing it, letting it cure, and everything …

I post two videos of our car, with two saz-3500D the machine was created just to play music But he also made two measurements in the race, 155db in spl regular, 153.9 db on average musical

so there's a show this weekend. getting tired of everybody talkin stuff about my sundown audio stuff cause they never heard of the name. i need to change my setup so i can win this show. my box is about 3.3 with 3 of the dual 4 sa12s. i running a 3000d @ 2.6 i have two options. either port my box i already have to stay behind the third row. or flip the seats up and build a 6 cube ported box just for the show. if i port my box i already have how high would i need to tune it. i need a mid 140's for this weekend. last show they held guy won it with a 139 or something. and i might add he had 4 15s in a box not tuned for the speakers. also would it be safe to wire it in par…