Sundown Audio

Well...chit happens....I'll let pictures speak for themselves.... Needless to say it's blown....and I cant afford a re-cone for a while...

http://www.youtube.com/watch?v=YhCUZCG8l5w http://vids.myspace.com/index.cfm?fuseacti...ideoid=54115137

Only took a few shots of the actual box build as I just didn't feel like stopping to take pics. 45's in the corners and strap braces on all walls, plus double front baffle. Box is plenty solid.

What is the lowest safe operating voltage of the Sndwn3000 Just doing a little testing today and I want to keep an eye on the voltage I know but I've seen reports of putting out their rated rms watts at only 10.5 volts!? I'll be running 2 batts yellow and red top 2/0 guage wire but only stock alternator. Just want to be safe Thanks in advance!!!

hey guys so my last box was a failed box for a few reason so i am looking to make something else! here is my design let me know what you guys think of it and or any other suggestion you can recommend (the one on the left) in case anyone is wondering my max dimensions are 17x29x36 here is my old box design this box failed for a few reasons like a shyt load of flex and a general lack of space in my car available. so anyways let me know what you guys think of the new idea, any recommendations comments concerns etc... let me know and thanks for your help Kenneth

How safe is it if I was to run pair of BTL15D2's @ 0.5ohm with music? I'm only able to buy one amp at the moment. I will be getting another as soon as I can, then I'll strap them @ 2ohm I dont know much about calculating imp. rise or anything like that, nor do I have the tools. This is honestly the largest system that I've ever done. thanks. I will be doing electrical as well support the planned power. H/O alt if and when I can find one 3 or 4 Kinetik hc2000

i have 2 12" nightshades and their getting very hot and smelly after about 30 secs to a 1 min of playing, and no low end my system consist of: hu: JVC kw-nx7000 sub: 2 12" D1 Sundown Nightshades sub box: 4 cubes @ 34hz, kerfed port sub amp: 2 audioque 2200ds strapped battery: (front)Duralast Gold;(back) 2x Deka Intimidator g31 electrical: Mechman 270a, big 3 in 1/0 gauge knu flex i cant figure out whats going on. i hooked them up to each amp (not strapped) and doing the same thing. it doesnt get as hot, but still gets hot and no low end. it sounds like my ssf is set to 34hz. anything below that is inaudible (ssf is set to around 25). and they bottom out vey easy

My new SAZ-1500D (Jacob, you're the best!) came in via UPS today. It just occurred to me that nobody has posted pics of the new heatsink for this model, so here you go! This is a crappy picture, but it shows off the upper heatsink.

So I got my 2500D, and I just realized that it doesn't have an internal fuse. So what to do? Fuse the + lead about a foot from the amp? Why doesn't it have a built in fuse anyway? Just wondering.

I compete on a regular basis, and was running the Massive Audio p3000.1 @ 2.3ohm to a single SoundStream T4 15" --- when the amp went into Protection ( coma ) and did not recover, so i sent it into the factory to check it out ! they said it blew a Cap and it wasent covered under the warranty, so they charge me to replace the board, and charged me for the return shipping.... the box arrives @ my office crushed---- so i called them right then... there responce was its a tough amp go ahead and install it anyway, i protested... but they insisted... so i install it and go to work, that night i go to dinner with my girl friend ! she noticed it in the back and asked me to turn …

is it possible to fix a blown mosfet on a saz-3000d? if so how would i go about it and how much would it cost. i found one for sale and was wonderin if it is fixable

This is the latest (and hopefully last) redux of my F-150. The equipment going in this time from front to back are a Pioneer AVH-P4000 DVD, Audiocontrol Epicenter, DQXS and Matrixes (x2), 10 Oxygen Audio Component Speakers (Air 83 set with a 6.5 midrange replacing the 8" woofer in the front doors and just a tweet and the 6.5 midrange for the rear), 2 Sundown Audio 100.4s driving the Mids and Highs, 2 Sundown Audio Nightshade 18s and 2 Sundown Audio 3000Ds breathing life into the subs. 1 Iraggi 300 amp alternator, Powermaster batts (1 2700 and 2 3100s) all Knukonceptz wiring. I will apologize for the lack of pictures my camera was lost and it contained about 2/3 of my buil…

My youngest daughter Rylie wanted a demo of the new setup in the KIA today so I gave her one and did a little vid of it. Enjoy.

158.7 at Meca E2 Audio in Ky.

Don't mind the title but it made you look.. Well I must say my sundown is GREAT, my pioneer SPL 12" D2's sound great but was lacking in bass race today. So am pulling them back out ( I just got them in yesterday ) and want to run 2 15" so I can get the numbers I am looking for 145+ run in 139.9 class, but my problem is do you think 2 FI BL's D2 on a sundown 3000 at .5 ohms before rise would be ok or is that going to be to much for the BL's for a 30 sec bass race run? If the 3000D is to much for the FI's I have would one sundown nightshade D2 with upgrades be better. I am sure the 2 15" BL's would be louder right due to cone area. Reason I am thinking the BL's is because…

I like them too much. What do I do. Looking at them isn't helping. I need a show to go too.

Hmm. How can I gain 3db's by Saturday.

Im gonna get 2 Fi BTL 12s 2ohm DVC and Im going to be getting a 3500D, whats the wattage at 13.8-14.4volts? would it be able to put out about 3500wrms for the subs? Or would I be better off with two 2000Ds? p.s. Ill have two batteries, big3, and all the electrical I need.

thinking about taking these bad boys out of there boxes and throwing em in

And it's amazing!

... well almost. Originally posted by Greg Kashin on my SMD Forum : Is the Prime Minister of The Russian Federation also a member of Team Sundown??? - SMD Forum ----- Yes, Vladimir Putin, the current Prime Minister and previously The President of Russia for two consecutive terms was at a bike run and was THIS close to rocking Sundown Audio :yahoo: Putin is wheeling the leading trike alongside of him is Surgeon a notorious Russian biker and leader of the Night Wolves.... right behind them is a huge trike rocking two Sundown SA-10's ...I know it's a little hard to see in the vid ( look closely at the vid from 0:18 to 0:21 ) and the media pics but them is Sundowns for sure…

Well, got to hear my first set of SD-1 10's yesterday. Let me be the 1st to say that when I initially saw them, I was a sceptic and was wondering what the hell Jacob was thinking. But, I still wanted to give them a listen and see what they're all about. To my surprise, I was shocked and amazed by those little subs. I expected them to sound good, but what I didn't expect was the amount of output that a pair of $100 10's on 300 watts would have. I was amazed. With no real tuning time, just sticking the woofers in the box, hooking them up to the rear channels of a 100.4, and letting them rip. Needless to say I was impressed. Impressed enough that I picked up a pair of…

Anyone Know If They Make Any ? If So Where I Can Order One. Thank You =]

6/10/08 TEMPORARY HOLD ON INTRO SALE - MAY BE NEARING OUT OF STOCK WILL UPDATE IN THE NEXT FEW DAYS If you intend to order please contact me before sending any money! ----- New thread. Old thread was getting cluttered and had quite a bit of old information. INTRO pricing will be available until June 20th. ----- PRICING: Paypal money to [email protected] $65 each for one to three drivers If you want FOUR of them then send over $240 (60 each). If you want EIGHT of them then send over $440 (55 each). Prices are shipped in the continental USA. I also have some b-stock drivers. B-stock for the E8 is determined as a driver that exhibits lead slapping during my bench tes…