Sundown Audio

demos/bails/term lab. check it out rate it 5* (or w/e the new thing youtube has going), comment, and subscribe! Thanks!

I'm picking up a pair of Z15's off a guy on the forums here. Due to trunk space and lack of a HO Alt I'm only going to be running one of them and either selling the other or keeping it as a spare. Since they're dvc4 I can only run it at 2 ohms on the amp, and the product manual states that the amp does 600w at 2 ohms. Will there be a large downgrade in performance running them this low? Right now I'm running 2 shitty 12s at a 4 ohm load, and since the manual states that it does 300 @ 4ohm, I dmm'd it at 300. I'm hoping that the z15 on twice the power will blow the 12's out of the water. But by giving the sub just over half its RMS, am I severely limiting it's potential? O…

I received a brand new Sundown saz-1500 this week and I just got around to installing it. All I can say is wow, it pushes the heck out of my RE SE 10 d4. It's funny, this is only giving the sub about 800 watts since it's running at 2 ohms. In addition, I have the gains on the amp turned way down, as I have not had a chance to set the gians properly yet. I think it's going to be time to get a sub that, first of all, can get to a one ohm load, and secondly, take the 1500 watts. That amp is a beast. I'm excited lol. I also received a Sundown sax-100 today for my highs, but I have not had a chance to install it yet. All Sundown as far as my power goes. I am converte…

The system 2004 Monte Carlo SS Sundown Audio SAE1200D v1 Fi audio 12 q with bp flex in a 2.5cu ft box tuned to 28hz wired at 1ohm Pioneer AHV-P3200BT Headunit Second Battery with H/O alternator 1/0 Gauge wire run including big 3 My sundown audio SAE 1200d worked fine for 3 months and then i took it out of the car because i wasnt going to be driving it for a month and let it sit in my room in the box under my bed. I just reinstalled my system in my car and now the amp doesnt work right. It powers on correctly and looks as if its working fine but it doesnt give ANY output. Sometimes when i start the car it will give output and work perfectly and can crank it and drive arou…

what size wire does it take i thought i saw 1/0 awg some where but cant remember . ugggh i feel like a trying to get everything to come around the same time so maybe i can get my system up and running in a couple months

Click it, rate it, comment it, and subscribe for future videos!

Would it be possible to trade the v1 nightshade I sent to get reconed for the new v2?

Fred Dietrich’s 2009 USACi SB4 World Champion Explorer Rebuild Previous Setup: 12 Kinetik 2400’s 2 Sundown SAZ-3000D’s 4 Digital Designs 9515D2 World Finals Score 156.5 on Eminem’s Go To Sleep USACi 2009 Finals Results New Setup 9 Sprinter S12V370F 8 Sundown SAZ-2000D’s 4 Crossfire XS 15D2 World Finals Champion Repeat: Priceless

If I place order for two sa12 d4 are they in stock and ready to ship in the ssa store?

Nicely done video too

Box size has alot to do with mechanical power handling. If you are going to be pushing your woofer beyond it's rated RMS power you need to be very mindful of this fact and put the woofer in no larger than the minimum suggested enclosure for music program. We design our woofers for very small enclosures and power ratings are there for a reason -- you can continue to push a driver like the SA-8 beyond RMS power and it will not be stressed whatsoever thermally by the time you can cause mechanical issues. The motor, especially on the SA-8, is VERY strong -- being an 8" driver there is limited mechanical throw available. The driver retains high motor force all the way up to th…

I bought a set of Sundown Audio Z-15's around december, sadly i never got them hooked up and now im movin out and i need the extra cash so i gotta sell em. Heres where my problem comes in. I need to ship these subs in order to sell them because the people intrested in them are out of state, one being in Oklahoma and they want around $250.00 to ship them. The price seems ridiculous to me. Does anybody know who will ship them from residence to residence for cheap? Feedback would be greatly appreciated.

Anyone know what the average turn around time is for a recone?

Is this (2 saz-4500) too much power to put on 4 15" Fi BLs?

Think the subs would be able to handle that kinda power birth sheet is 3303rms at 1 ohm and thats what i would wire them to box would around .75 cubes per sub tuned to 36 htz maybe a lil lower looking to be louder than the btl 15

is there any significant output differences between these amps. I would like the 1500 but its out my price range rite now. Besides the sae being unstrappable are there any advantages to using the saz. Still considering the sub at moment.

Hi All, Complete noob to the Sundown name, but I recently purchased a SAE-1200D to power a SSA Icon 12 as a daily driver. My question is on the remote that came with the amp there is an 'off' labeled to the left of the min setting. Does this turn the amp off if the knob is put there? I was going to install a switch in the remote turn on lead so that I can have the radio on with out the sub at certain times. (Like listening to a hockey game on the radio) But if the remote will serve my purpose then there is no need for the added switch. Thank you for any help that you can provide.

Hey jacob, i was just wondering if u had got my email, i've been having problems with yahoo lately and havnt had a reply from ya since friday. I know ur busy but i was just wondering if u had gotten them, bc if not i gotta get a new email provider lol. so just hit me back whenever u get a chance. thanx.

I just want to say thank you to Jacob at Sundown with all the help he has given me. I purchased an SAE-1200v1 from a person on another forum, and as soon as I hooked the amp up it went into protection. I checked my wiring, and even hooked up another amp, which worked fine, but the Sundown just kept going into protection. This was on a Sunday, and Monday morning I sent Jacob an email asking if there was a remedy to my problem. Of course, I had no documentation for the amp in question, so Jacob offered to send me either a new 1200v2 or a 1500, both for a very nominal upgrade fee. I jumped on the chance to get the 1500. (It is probably way more power than my single 10 …

is it possible to get the diagram of the board layout?

Okay after researching and deciding on Sundown Audio SA-12's the time or should I say box has arrived and I have nothing but praise for Jacob and Sundown Audio. I don't have the space to list all of the different subs I have used over the years but if you can name them, chances are I have owned a pair. These subs absolutely lived up to the hype. When I first installed the box I just disconnected one box and put another in. I was replacing my Kicker SoloBaric L5's. With the volume at a low level I have to be honest and say I was not impressed but as I turned the volume up I was completely amazed at what I heard. I cannot say enough at how amazed I am at a sub that's …

lil build i did this weekend, 3 sa-12s on a saz [email protected], 6cf@30hz kerfed port sealed w glass. lots of sanding left and a outside glassing needed but sounds great

can i order just a bass knob for an saz 1500?

so my dads drag racing buddy has a car audio shop and he has 2 saz1500d's that need repaired. waitin to here if he can get it done. but would it be cheaper if i got them from him as is for cheap and sent them for repair? if so where would i send them and what would be the average pricing? theres a place her in oklahoma city called toms two way or sumthin like that that repairs all kinds of electronics including amps. would that be a good idea?

I wanted to know how to strap together 2 of the amps? Do you have to run power, ground and remote to both or just master?