Sundown Audio

Since my lvl 5 12s are out im making move im looking, at the team 12s, but I cant find many vids or users talking about it. Any one who has some experience with them please chime in box size, port area etc... thank you., im running a Ampere audio Tfe, Electrical is Dc270xp and juicebox Lithium battery.

All I can say is wow. No exclamation points. No Caps. They would not do it justice. I have no numbers regarding SPL as am not sure where I would go nearby. I have not swapped out the interior speakers yet but did hook all of the factory speakers to a RF 500a2. I ran a positive and negative cable run of 1/0 Knuconceptz Kolossus cable. As temp power I ran two 4 gauge cables to the positive of the amp and a 1/0 ground. Alpine cda 9884 cd receiver and the Alpine RUX-C701/PXA-H701 controller processor combo. The sub is in a ported enclosure kinda on the large side. 3.6 cubic feet tuned to between 35-40 hertz. Not quite sure as I need to do a little more to finish the box and w…

if Db-r doesnt have any saz 3000ds where is the next best place to get them?thanks in advanced

i was wondering if they have any more 15" nightshades left? looking to buy this friday!

i want to run (once the saz 3500) a 3500. i was wondering what electrical i would need to do. obviously the big 3 but what kinda alternator and batteries would i need? (also will have a saz100.4 for the doors)

I know that they offer the SD1 and SD1v.2 and that they are coming out with the nightshade but the SD1v.2 is too small for me, does not take enough power and the nightshade takes plenty of power but it appears to be geared towards full blown SPL, correct me if I'm wrong. I was wondering if there are going to be any subs to fill the gap between these woofers, a good daily driving sub that can take a good 2-2.5kw RMS. I was also wondering about the amps. I know that the 1500 will do around 2kw and the 3000 will do around 3.5-4kw. However I was wondering if there are going to be any amps that do in between, maybe a SAE-2000 or 2500. Let me know any info thank you.

Sold out. Unless you have talked to me in the last day or two and a deal is in the works no more are available at this time. ETA for more not yet set.

I'm curious why there hasn't been any mention of these amps since the preorder shipped out. There was a lot of talk up until then and I sort of expected some reviews to follow. Maybe I missed it but I dont remember seeing anything. So how is everyone liking these? I am considering picking up a couple and just wondering how they are performing for people.

I am using a SAX100.4 to power my ID OEM mids and Focal tweeters. Channels 1 and 2 go to the tweets and 3 and 4 go to the mids. They are being crossed over in my Alpine CDA-9887. SO my question is what signal will be present at the 100.4's RCA outputs? Does the amp sum all the signals together so I will have a full range output there or does it just use the inputs from channels 1 and 2 or something? I want to run some rear fill in my Acura MDX and I was thinkin about picking up a SAX100.2 but I dont know how to get a full range signal to it because my deck only has 3 preouts. Any ideas or suggestions are appreciated.

On a strong 14v electrical, what can I expect? I have a 275 HO Alt, 3 YT, 4 runs of 1/0 (2+/2-). I've sold my MM 2K autotek and i'll be looking for another bigger amp shortly, and i'm kinda leaning towards this.

I am leaving January 4th and returning the 12th -- so will be back to work on the 13th or so. While I am gone some orders that can simply be boxed and shipped will be completed -- customized items, re-cones, etc will wait until I get back. Some staff will be here but operation will be at limited capacity.

I know a made a review thread before, but I didn't fee like bringing that back to the top. I recently just got my third amp was able to really give some power to these guys before I was only giving them ~30 watts. Amp in theory is putting about ~125 per speaker, rough guess is probably they are seeing ~110 at full tilt. Man does power bring these things to life. Crossover set at 85@24dB slope. The combination of the MS-8 really helps brings these speakers to life. They get LOUD and have no problem keeping up with my horns receiving almost the same amount of power (of course the MS8 helps with that too). They sound amazing as well, even at full tilt. But my biggest concern…

Just throwing some ideas out because I want a hat and think other people may as well. This is just a crappy quick photoshop I did to show my ideas, I may make a final copy that blends and actually looks good in the future. Idea 1 Idea 2 Or we could just do the logo without the team above it so anyone could buy and wear it. Feel free to add ideas and discussion.

is the sundown 1500 .5 ohm stable?? for daily use? Using it for 2 15" SSA Icons

Which sundown amp would be the best for a 18" Fi BL 1000rms sub?

while the saz3000 says 6v-0.2v for the gain, does addin a line driver which puts out 9v is not safe?

Does the saz1500 have a signal output, so you could run rcas from it to another amp? I'm thinking about getting a smaller amp for mids and highs and wanted to know if I would have to run another set of rcas from deck? Or if the saz could output it. Thanks

Just got these in - Thanks Jake!!! these have the NS parts since the z v3 parts were not in yet when these were built

This is Team Nemesis Jay's Magnum. It has a pair of Sundown NightShade 18"s powered by a pair of Sundown saz-3000s. This car loves screwed music and will play it all day long. The amps never get warm and the subs barely get a temp even after some hard beating. Here's a vid. The song playing is a screwed version of Gorilla Zoe - Waddle that peaks @ 31hz. I've heard some comments about NightShades not being able to play the lows. Well here's a reality check.

Goofy question I know, but my 100.4 just came in and I was admiring it... Tehn as I was looking at the lil knob that come with it, I had the thought that I don't normally adjust my gains or boosts after they are set... Also, I don't really have a place or want to mount 2 knobs up front on the TrailBlazer when I get my system in and if I ever do get the system in teh Blazer, I sure don't want 6+ more little knobs up front there...

Hey ! I have 15" AA Havoc D2 in 3CF sealed. The sub is 1250 RMS. I wonder if the 1500D would be worth the extra money (450$ vs 600$, domned Israeli taxes) or maybe the difference won't be that big. someone told me that the difference would be 1.5 dB because the latter is half more power than the 1000D. What do you offer me to do ?

Started in on the install.. Wish I had more ground cable, we decided to do multiple runs and I don't have enough grey/silver since we used some for more power wire.. doh. It'll all be hidden anyway. Lots more to do (probably a couple more days worth).. I'll keep the pics coming.

Jacob, Are there any plans on making a 6 channel amp? 50X4 125X2 or preferably 100X4 250X2? If so I can hold out. I really want a matching Sundown 6 channel. My other options are Mcintosh or Tru at least as far as I can find. And I hate to part with the green that those brands would cost me for no other benefit than the "Look what I got!" BS.

ok so i got my self a 3000d and am waiting on my fi q 15" D2 to come. i was wondering if i ever expand to a seconded one if i could run the 2 at .5 at around 2400 watts and not piss off the amp for daily use. other than that any tuning suggestion for the single fi Q besides don't crank the gain knob all the way up. and if u use a dmm what should it read for 1100 - 1200 watts, at the moment it says a bought 70V but that dos not sound right it would have blown my 100A fuse by now it that was true. thank you for your time.

got 3 of my 6 sa-12s and a single 1500 for a temp amp. made a box for the rango to demo to a shop, 4.4@30 hz still need to do some finish work will get picks up soon, low to mid 140s kills on all music hehe