Sundown Audio

Just sent [email protected] the money. I can't wait to get this and set up my fi q

Since my 4 15" Soundstream T4 project is being delayed, I decided to strap both amps into the sebring on 1 MTX Audio 12" 9500 subwoofer today. Got both amps strapped up, all connections good and the master amp set at 1/2 gain and 1/2 bass boost in a 2.5 cubic foot box tuned to 38Hz. My first reaction when the bass hit.....was like......HoLy SH**.. It literally took my breath away and I had to turn it down. My trunk was trying to jump off the car literally. 1 ohm on each amp, and this 9500 is taking it like a champ. Amps never even got warm. These SAZ 1500's are some badass amplifiers, and I'm very impressed with them. Thanks for making great amps Jacob, appreciate it.

Sundown Audio has been selling off used, b-stock, and refurbished amplifiers as well as other miscellaneous items that need to be sold on e-bay for the last two weeks. So far it has been off to a promising start. If you want to see what is up for sale at any given time check auctions from "sundownz" on e-bay: http://search.ebay.com/_W0QQsassZsundownzQQhtZ-1 Usually it will be various amplifiers... occasionally other items will be for sale that either belong to me or were somehow acquired by Sundown Audio.

Purchased two D2 SA-12's about 6 months ago or so. The guy I bought them from bought them in Jan or Feb this year (2010) and they were re-coned with aluminum coils. I've just recently got a new amp and had everything completed then one crapped out on me. One coil is reading 2ohms, the other is around 2.8 and fluctuates. I'm just really disappointed this happen as I never put too much power them then, could it just be a result of a bad recone in the past? I'd like to get this back up and running asap. Thanks for any info

Which would be better off 1200rms? ""SQL"" wise

Probably won't have any time to put them in for another couple weeks, but just wanted some info. What crossover point should I use for the woofers to protect them from too much power? Right now my SAX 50.4 needs repair, so I'm gonna be using an old ADS PQ 10 bridged to run them, so probably around 60-80 watts per channel, so shouldn't be too large an issue with that. But when I get my Sundown amp back, I thought I would run that bridged, which would give them what, about 160 watts/channel? I've seen Jacob mention he's been running his off two channels of a 200.4, so I assume that's 200/channel? So what crossover point is recommended, and higher with a shallow slope,…

Has anyone tried the Sa-12 's in a 4 order bandpass ? What kind of number? I'm thinking of trying 3 in a 4 order. Can anyone design this type of setup?

I received my 50.4 today and it is beautiful as always. So now my new build will consist of... 1200D for my Subs. 100.4 bridged for my Mid-Bass. 50.4 bridged for my Mid-Range. 100.2 for my Tweets. Front stage is a HAT L-631 running active via Alpine H701. You think I have enough headroom?

* Box is three layers thick on the front for amp mounting - but we are still trying to find another place to mount the amps. * Huge port! * Brandon's trophies from the show, and our lucky extra dBeez! * Damage to the roof from demoing at the show * Another view The deadener is also ripped all around the edges of the perimeter of the roof... little pieces were falling down all day!

This SAZ-1500D was shipped out for testing purposes and then shipped back to Sundown Audio afterwards. It looks pretty much brand new, although it is used so it has some finger prints and whatnot on it. This amp will be covered by full warranty from the date of purcase. $425 shipped in the continental 48 states via paypal

Over the last few days I was home and able to run a couple tests with my gear. I was pleasantly surprised to see these numbers when I clamped my pair of SAZ-1500Ds strapped at 2 ohms (1-per), car on with factory alt, off of a little 600CA battery: ~3,100WRMS I built my first attempt at a box strictly geared towards SPL, and after tinkering with it a bit worked up to a score of 146.0 dbdrag style, using these amps and two 12" RE SXs out of a saturn trunk. Just figured I'd share the results... I have big plans for this summer once I get a hold of a new battery and some time to build/test.

I am building a competition van for a customer and it will have either 16 XS Power D3100s or 20 2400s (working on sponsorship), 4 Kicker Warhorse amps, and a deck mounted in rear for burps with a audio control line driver (8v). This will be walled off and strictly for Competition use only and tuned around 70HZ. The customer wants to go with Kicker Solo X 18s but I am currently trying to get him into Sundown Nightshade V2 18s. There will be 4 subs and each one will be hooked up to one warhorse at full power (approx 10k rms each sub). In the van already i have deadened the cabin (this is only modification allowed in front of B-Pillar in USACI Modfified Division), ran 2 4/0 …

Originally posted by Grigoriy Kashin on my SMD Forum : another 156+ from Team Sundown Russia - SMD Forum This is a burp only no-wall setup. ---------- Ok, I'm posting this for Drugban, to cut down on the LOLz over google translate This car is built for IASCA Advanced NW 2 class - everything is behind the B-pillar and beneath the window line. The car is a Russian Izh Oda, a compact 4door hatchback - currently in totally stock form with no sound deadnr at all (they will experiment with it over the week) The gear: subs: - two Sundown Audio z15v.2's d1 amps: - two Sundown Audio SAZ3500D's strapped @ 1ohm running on 16v bats - 3 Optima 5.5L Bluetops + two FIAMM 4v cells meter …

Is it possible to buy just the crossovers? I have 2 sets of rokford fosgate 6.5" component sets (don't judge me they were $50 a piece during back Friday locally). They did not come with crrossovers. I have sundown for everything else in my truck.

I've got two sundown saz 1500's... Love em!!! Just finishing a custom box for 3 RE SX 12ft^3 @ 34hz and I want to put "RE" and "Sundown" logos on the box Is there any way I can get the Sundown logos? Does the company have them where I can call and order? I ordered from Ricky here in KY... Im in Louisville If you read this Ricky give me a call if you still got my number I need to holla' at you anyway This is Gerard This is my first post on the forum WHAAASUUP EVERYBODY!!!!

Hey Guys....I recently installed a SAZ 1500D and I am now experiencing engine noise (a buzzing type of sound). I can unplug the RCA's from the SAZ and it goes away. I was told that I should ground both of my amps in the same place and that might help...Well, I've done that and it hasn't helped. Prior to installing the SAZ I had a JL Audio 500/1 and it didn't have any noise. I've even ugraded my BIG 3 and also ran some 1/0 gauge since installing the amp thinking that may help....But the noise still remains. The RCA's are new and I cannot imagine why they would make any noise since they didn't with my previous amp....Is there a possibility that the SAZ has something wr…

SUNDOWN!!!

hey i got 2 sundown 1500ds (iv had a few threads on here) and i was wondering if i could daisy chain the RCA's through the br out and br in without having the amps strapped. otherwise im gonna need some Y adapters...

thought this was funny maybe someone can shed some light http://audioforum.termpro.com/cgi-bin/ubb/...pic/3/6773.html

Well, hi to everyone at sundown. From what I can find it seems that this amp isn't quite out yet? I currently have 2 memphis 4ks, and was about to buy 2 more, but I'm wondering if there is something better out there before investing memphis. There was mention of a pre-order of 3ks for ~900each, which if I could dump off the 4ks quick enough I would be interested in buying 4 of them if its beneficial. After reading the thread on testing it seems they put out close to 4k at 1ohm, 14.4v? Please correct me if I'm wrong. While bias can be expected on a product forum, I'd really like to get some more info on these amps. Everyone seems to love the 1500s, and I've heard nothing b…

Hello All, Im finally going to install my amp I bought a few months back and have a few questions. Let me start by telling you were Im at. Im going to be installing an Sae-1000D amp powering an RE SE 10" rated @ 600watts @ 2 Ohms. I also have a 4 ch PPI amp bridged 160 watts running my front components. The car currently has 4 ga wiring. Would 4 ga still be enough to run the 1000 and PPI amps. Also what size fuse should I use for the power wire. Thanks in Advance, Mike

So Derrick came up today and constructed a box for me for my four SA-8s... still two 1500Ds on one Stinger SPP-1500D and one Stinger SPV-70 battery on Powermaster Charger (car off). We built the box from scrap 5-layer pine plywood for testing... we plan to use birch ply for another version at a later date. Results here :

Ok maby what i should of asked was is the t2500 from Rockford enough to power a fi btl 15" to full potential

what do yall think of the z v2 d2 15 in a spl box tuned to 39 hertz on a dc audio pai 3000.1

Has anyone tested the 3000ds in a street or street-max application?