Sundown Audio

hi i cant decide whether to take a 3500 or a 4500 for one 18 btl. ill use the setup for daily drivin but i also want to be loud as hell. which battery upgrade do you recommend? is one d3100 enough?

well im upto a 153.2db now as my burp score 8 sundown 1500d's 4 dd 9515's (pre-wired) ****UPDATE**** this is with no testing other than throwing the subs and amps in and checking volume and tunning 153.2db burps score 152.3db bassrace (perfect start) 151.9db bassrace (later start) this is as clean as it gets untill i get to a 155db

http://www.caraudioc...prototypes.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $115 Regular Price : $140 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these are both not in…

Hey you guys are really imformative on these forums. So recently I installed my new system that consisted of a Fi BTl 18, SAZ 3000d, HO alternator(220amp), Kinetik 2400 in back, all 0gauge wires, big three all in a Nissan Pathfinder. And recently I would be listening to music and then the subwoofer would cut out and there would be no output. I inspected the sub and it looked fine. I switched the sub with a JL and it did the same thing. Played then cut out. I checked rcas, ground and also checked to see if the speaker wires r hooked up right. I switched out the 3000d with a Alpine amp and it worked fine. If you guys got any input or advice i should try please let me…

Hello every budy here @ the sundown forum. i'm Cornelis from Holland and have a saz 3000 in my streetmax 1/2 spl car. whe tested the amp in a couple of cars now. whit good test results. whe tested a bmw coupe E36.from 1994 .whit 2x 12 inch @ 0.5 ohm hitting 146.8 dbs @ 46 hz. and whe tested in a vw caddy from 1996 whit 5x 15 inch @ 0.5 ohm hitting 151.7 dbs @ 38 hz and in my panda streetmax 1/2 whit 1 northstar 90 nsb and 2x 18 inch @ 0.25 ohm @ 67hz whe did a 158.1 whit voltage drop 11.22 volt

http://www.youtube.com/watch?v=YhCUZCG8l5w http://vids.myspace.com/index.cfm?fuseacti...ideoid=54115137

well might be makin a trade for a 15" d1 nightshade. i currently have a 15" hdc3 in a 4.7 cube box @ 38 hz using 3 4" aeros. just wanted to see how it would perform in this size of a box? dont have the time and money at the moment to built a new one. but will be when i get some extra time and money. oh and using an aq 2200d for power

I purchased my amplifier from Db-r, The day i got it i hooked it up it blew and started smoking. I sent it in to Db-R they fixed it; The guys at Db-R said the power input was soldered too long and it burnt up and smoked my power supply. They replaced everything under warranty. Today (12/25/09) I opened my Saz-3000d and was just looking around at Sundown's beautiful job at designing/making amplifiers and found this. as you can see the MOSFET's most are soldered in on the top, but there are a few that are not. Is this something to be worried about?

Went to AudioThunder in Niagra Falls new york with some small changes to the vehicle. Terrible drive up due to conditions outside but well worth it! Eclipse is doing 154's a lot more often now that I strengthened somethings in the rear hatch and removed the spoiler that was leaking some air. 2nd in the preliminary (saturday) 1st place in the finals for bass race (sunday) Should get a 55+ out of it charged. Will try and get a vid of that up soon. Here are some videos I took from the show. Amps are still running excellent at .5 ohms Jake! Tn0x9j3N9-k gE42dm0p7so nGVtW0bt3Xk KbEkEbwr8xE nuSYz44ebYI 6lQr66E6Y_U some fool wanted to sit in bobs van during his 161 run in b…

where can i get a large "SUNDOWN AUDIO" rear window decal?

Does sundown have a webpage? I googled it buut found nothing.

What is the air displacement on the SA-8. I'm trying to account for it in a .5 cube box....

The box is built for 2 Sundown audio sa-12's tuned to about 35z with 2 2" ports and i was wondering if those would be a big enough ports or if i should take out the middle separator and make it one big 3" port. The end goal is to have the least amount of port noise possible. This is with the 2 different ports This is with the single port And advice would be greatly appreciated.

Our new FedEx rep was a good sport and got a short demo. 12x Obsidian Audio 12s 2x SAZ-4500Ds on 16v @ 1.33 ohms We forgot to have the low-tuned loading wall in -- so hair movement not as good as it could be but our rep enjoyed it !

I havent been on the forums for a long time.. too long.. haven thad time to compete in a while either but I have been using my 18'' nightshade and 2 saz1500s for my daily system untill the other day it just quit working.. I pushed in on the cone only to realize that it was completely locked up... odd but it happens... so i took the woofer out of the enclosure to find the top sulg on the motor had complete broken in half and was off center.. iv never seen this happen so i figured id share... its a sad day as i cannot afford a new motor in the near future...

i have 2 12" nightshades and their getting very hot and smelly after about 30 secs to a 1 min of playing, and no low end my system consist of: hu: JVC kw-nx7000 sub: 2 12" D1 Sundown Nightshades sub box: 4 cubes @ 34hz, kerfed port sub amp: 2 audioque 2200ds strapped battery: (front)Duralast Gold;(back) 2x Deka Intimidator g31 electrical: Mechman 270a, big 3 in 1/0 gauge knu flex i cant figure out whats going on. i hooked them up to each amp (not strapped) and doing the same thing. it doesnt get as hot, but still gets hot and no low end. it sounds like my ssf is set to 34hz. anything below that is inaudible (ssf is set to around 25). and they bottom out vey easy

Hey guys, greeting again from Russia... we just had the national DbDrag finals last weekend. Our team in Rostov quickly (about a week) build up a system for SS1-2 that was good enought to take second place in the class with a 156.5 two SAZ4500's two Sundown Audio z18v2 subs two XS Power D3100's here are some pics of the build and from the comp this has a ton more potential ...hopefully they will rebuild it soon with metal for the cage

Had a nice gift waiting for me when I got home today. Three Sundown SAX-125.2 amps! One will be powering a set of components, Image Dynamics CXS64. The other two will be dedicated to my subs, two JL Audio 8W7's. These amps look great! Here are some pics. Nice, huh?

My Buddy, Kelly, aka (The Rattrodder) finally uploaded the video he took of the Kia demo yesterday at his new shop. Affordable Audio Solutions in Dillon SC. Enjoy. http://www.youtube.com/watch?v=Z3Oyw1g9XHI&feature=feedu

Can someone design me a box for a nightshade v2. Thanks

So they arrived a couple of days ago but my lazy roommate hasn't gone and picked them up yet. About a week and a half ago I talked him into order a pair of 10s to replace the current Kenwoods under his backseats in the GMC Sierra. Today I finally got fed up with it and went to the front office to pick up the pair of Sundown SA-10 D4 B-Stock we ordered from Jacob. So the lady goes to the back to get them and calls me in for help because she claims they are "really heavy". I was thinking to myself, no way are these things THAT heavy. So I go to lift them both up and almost shit my pants. I did NOT expect the weight they have. Jacob sure fed these subs their Wheaties! On top…

Hey guys, Almost all of them shipped as of today -- just letting you all know !

I'm probably gonna sound really dumb but heres the question would there be a huge difference on one SS rl-p 12" D2 using those amps. i mean theres a 200watt diff. between them two, would those 200wats have a huge impact on that sub? sorry for dumb questions dan

Hello i have a small question when strapping 2 1500d's is 26 inchs to far about will it hurt performance i am having alot of trouble fitting everything in my hatch was hoping to stack the amps but just dont have the room so i was wondering if i could put 1 on each side of the box and still keep them strapped or if i should just divide the box into 2 chambers and run the amps unstrapped would like to get some you guys opinions