Sundown Audio

I stare at it for hours on end until my day will come to have this amp. I fantasize adding to the cart a few times a day lol but recently I notice it says basically out of stock. The year is quickly coming to an end and just want to know if there will be more to go around in the coming months? Again sorry if I missed my answer if its already up.

so i have been asked a few times and have done my fair share of looking and asking.....what is the 1 ohm 2 ohm and 4 ohm (mainly 4 ohm) rating on the NS1? i cant and others cant seem to find these any where apart from its a beast. we compete USACI in my area and 3 of the guys in or close to the 160s really want to know this to see if they can be in the classes they want with this amp. I also have heard it will have 1 rating only 600 rms @ 4ohm which would be killer in USACI but whats the truth to this? Im tired of getting the run around or answer-its a beast when i ask. my customers are really curious too and keep asking if i have heard anything.....so please JACOB straig…

im thinking of 1 ns12 in a extended cab truck or should i stick with my 2 db plw12d4's. the truck in qusetion is a mazda b2200.subs running off my saz-2000d.

Current NSPL Records as of 4/19/2011 Truck/SUV 1801-3600 Danny Craig 152.1 Sundown/Sundown Trunk 0-1800 Team Nemesis - Robert 149.0 db Sundown/Sundown Trunk Hardcore Team Nemesis - Robert 154.3 db Sundown/Sundown No Wall 49"-up Team Nemesis - Robert 157.2 db Sundown/Sundown No Wall Hardcore 25"-up Team Nemesis - Robert 157.6 Sundown/Sundown No Wall 0-2500 Team Nemesis - Derrick 151.3 Sundown/Sundown No Wall 2501-5000 Team Nemesis Mike 152.6 db Sundown/Sundown No Wall 5001-up Team Nemesis Walt 155.5 db Sundown/Sundown No Wall Hardcore 0-2500 Team Nemesis - Derrick 154.7 Sundown/Sundown No Wall Hardcore 5001-up Team Nemesis Walt 158.2 db Sundown/Sundown Wall 2501-5000 Team …

Just got back from the show... Sundown took a 1st and a 2nd place today. Justin Davidson in No-Wall 24 - 48 inches: 4x 12" Konaki Subs 4x SAZ-1500Ds 3x Powermaster D3100s 1x Powermaster 200-amp alternator 150.5 dB * 1st place for the day in this class * We installed / built this whole system yesterday ---- Jacob Fuller (me) in Wall 1201 - 2400 amps: 4x SAZ-3000Ds 4x RE MT 18s 8x Powermaster D3100s 1x DEKA Intimidator 2x Powermaster 200-amp alternators 158.2 dB * 2nd place for the day in this class * I could have entered in 401 - 1200 but will be added 4 more amps so decided to start getting point for the 1201 - 2400 class now. Big Poppa (Jeff) beat me today with 162 dB

Truck/SUV 0-30 - We did a 146.4 dB. Good enough for first place for the day. Truck is unmodified factory electrical and no sound deadening. 1 SAZ-1500D on 2 SI Mags D2 12's wired to .5 ohms in a 5cu ft box; did a good amount of work to get the port just right. Looks like the key frequency was 48 hz.

A few Sundown guys at the show today... Big Al with 2x SAZ-3000Ds @ 0.7 DCR each un-strapped running on only two Kinetik 2400s + starter battery... powering 2x Kicker Solo-X 18" subs in a daily-tuned listenable, beautifully done, fiberglass box. All in his Cadillac Escalade. Honestly don't remember his class designation... believe it was truck/suv 25 - 48. 150.9 dB today! He has 2 more SAZ-3000Ds and more batteries going in soon. Each 3000D will be seeing 1/2 the impedance that the two from today were seeing. --- My brother, Adam Fuller, running 2x DD 9510s D4s @ 1 ohm strapped (1/2 ohm per amp) on 2x 1500Ds on stock electrical + a DEKA Intimidator in the no-wall 0-24 cla…

Hey Guys. I set a new World Record in NSPL Truck/SUV 1801-3600 Watt Class. 152.1Db@49Hz and 3157 Clamped watts. Team Nemesis Derrick filmed my record run. Enjoy.

Ok, I contacted you guys via Facebook to ask some questions about how the Nightshade V1's, and I have yet more questions, but I figured they would be best suited for the forums to inform other people with similar questions. First off.. Do you sell a recone kit for the NSV1's and if so, what's the price? Secondly, I know you said 2.0 Cubed is about right (NOT PORTED) for the NSV1, but I'm sick of seeing the same square/Rectangle boxes, with the same slot-ports. Any ideas on a cool looking (and still functional) box? All would be done with 3/4 MDF, and if so, what programs do you recommend for designing boxes? Thanks SD, you guys have fulfilled my Audiophile needs! I don…

I live in ct. and am willing to help others set up thier amps and head units with my o-scope. it makes a difference knowing exactaly when you have distortion or clipping. if i can save even 1 good sub from death it will be worth it. i dont have alot of time on my hands but will help when i can.

Details on this please?

Phone hours will be 8 AM - 2 PM minus 12-1 for lunch the rest of this week (has been this way for a week or so already) -- but will be back to normal next week. We've had to work around a bit of an odd work schedule for a bit but we'll have it back to normal next week

ok i have 2 nightshade V2 D1s and as far as i can remember my coils always sat at pretty much even 1 with a variance of .1 or so ... so in series they would be at 2 ohms per sub... then of course paralleled to 1 ohm at the amp ... well today i was out testing some new songs.. and my subs never get hot .. but today i heated them.. and when i was done playing i checked my temperature of the dust caps and they were both pretty hot.. 1 being hotter then the other... no problem the shades are beast they can take a little heat... so after that i went to the store, then on the way home i played my stereo again .. but it was not as loud... first thought shit.. i burned …

I calibrated and tested this neo oddball with a WT3 woofer tester; jacob or anyone knowledgeable; do these specs look alright; and to any bandpass enthusiast, does the box have any flaws I should be careful of falling into. Driver Properties Name: Neo 12" driver Type: Standard one-way driver Company: Sundown No. of Drivers = 1 Dual voice coils = series Fs = 35.66 Hz Qms = 5.591 Vas = 1.429 cu.ft Cms = 0.11 mm/N Mms = 177.6 g Rms = 7.257 kg/s P-Dia = 10 in Sd = 0.0507 sq.m Qes = 1.855 Re = 3.634 ohms Le = 4.268 mH Z = 14.59 ohms BL = 8.829 N/A Qts = 1.393 no = 0.0943 % 1-W SPL = 81.84 dB 2.83-V SPL = 85.32 dB ---…

if you havent seen the build log...... yup cramming 3 nightshade 18s into a Cavalier!!!! was VERY close to not fitting like i had originally planned but it worked out

So many thanks to Jacob. I got home from work today and what did I have waiting for me?? so what could it be? oh yeah! so what is it going to be powering? 3.1ft^3 tuned to 32 Hz 45 sq in of port I hope to have it installed no later than this weekend. once again thanks Jacob Chad

did a 151.2 today with 2 9510's and 2 1500's strapped @ 1ohm on one nsb-90. can't wait for the 3000's to come now SUNDOWN FTW

Ok Dj whats up i've seen them somewhere else why not here? i'm not telling tho.

Ok just got my second 1500 today with sticker's for the car.my wife brought home a dell computer for my $300 2 mic term-lab . it is up and running But it is raining out so no test's just yet and I still need to hook up second 1500. i have my second 9500 D motor coming wensday . and I have a couple crx's in my sight's. i have 4 run's of 0 gauge and a nsb-90 to start with. still need the part's for second 9510 oh and crx last thing will be 6" aero port's. anyway's first show is the 28th need to do some testing by then and mess with a few box's but not sure how much I'm going to do with the eclipse for the first show. might just add second 1500 and go with it until the…

I was wondering what the difference between the older 3000D and the New 3000D? Besides the casing.. Can the older 3000D be okay at .5 Ohm?

For the 2 18" mts in the mini.. Main problem is electrical. Not sure on it yet.. I'm most likely going to get one 3000d first (due to money) so I can run it @ .5 to both subs. Then if I feel the need, I can get another, and switch it up to both amps strapped @ 2 ohms for both subs. Subs are dual 2. What do you guys think? Mids and highs amp will also consist of two 100.2s, and one 100.4.

We plugged up one port hole in a box I had laying around the shop and dropped an NS 15 in there to see what would happen. Good times I think we've had too much fun this weekend. Also did a video of a 149.5 run -- my clamp did not register in the video for some reason... but when we did the 149.7 run I clamped 2500 actual watts. VIDEO :

http://www.caraudio.com/forum/showthread.php?t=178329 Next to Brandon's this is the first customer install of Sundown Audio amplifiers. And since Brandon has yet to provide me with pics Hollis is the first to have pics up on the net Crazy install... Hollis has his SAZ-1500Ds wired to 0.5 ohms and they are holding their own.

Originally posted on my SMD Forum by "mbrooky" ONE sa-10 on music 30sec avg - SMD Forum ---------- pulled a thorshammer with my sub..lol 6k on one 10 softparts came apart on my sub when doing a run so my good bud tony let me throw in ONE of his sa-10s to see what it would do on my setup for sng's was taking it easy on it as it was not my sub...lol score kept climbing but ran out of time and didn't want to kill it either lol and my boy tony's s10 with 8 sa-10s:

Hi, I'm new but a long time lurker of this board. I've finally decided to purchase a sa-12 and add a subwoofer to my car. (Bmw E46 Sedan) Before I purchase, I would like to get the box sorted out. I've been using some different calculators and various threads from this board to figure out how I should build the box. I have the whole trunk to use so no space constraints. The sa-12 says 1.75-2 cubic feet which leaves very little to no room for a port. I want to tune to 35 hz. I looked into maybe one 6" aero port, but it would be a stretch to get a 2 cubic foot box to fit the sub and the port which would be 14-16" long. Any help or suggestions? Would a passive radiator be m…