Sundown Audio

on the e8's what does the e stand for?

For some reason I misplaced the specs sheet I had on the SD1v2 and recommended enclosures. can someone help me out.. I think it was around .65 or so sealed but I can't find the thread on it either. Thanks all! David

will b building a new box soon, & tryin to figure out how much port area you'll recommend 4 a 15" ns in a 3.5 cube box? I have it n a 4.8 cube box now, & it sounds good. using 3 4" aeros @ 32 hz. not sure if I want to use the aeros or a slot 4 the new built, would like to use the 3 4"s but ill b to long 4 my box. so I'm thinkin maybe only usin 2 4". what u think?

got my saz-2000d and sax-100.4 in the big brown sleigh today. loving this support i need to get to work installing these.

Can someone please tell me when the last day to preorder the 4500d will be? Thanks, Mike

Who would be interested in seeing this come back ??

I need to mount two amps together. One on top of the other. What is the easiest, best way to do this. I also need to keep them as tight as possible due to space limitations. Any suggestions?

i wonder if the SAZ-1000D would be a good amp for midbass at the moment i'm running a 100.4 for mids/highs and the 125.2 for the midbass now i wanna get 8 (4 in each door) SPL Dynamics HF6.1 for midbass, but i don't think the 125.2 will have enough power for 4 per channel so i thought about going with 2 SAZ-1000D anyone tried them for mids yet?

I've just opened up the tummy of my amp and discovered that one of the coils or inductors are touching one of the fuse legs, is that anything to worry about? and uhhh hope i havnt just got rid of my warranty?? ehh.....prob doesnt matter anyway because it will be over a years time from purchase that i may actually use it lol... I'll post a pic in a sec!!

More power this time... current clamp shows ONE coil. We hooked each coil up to a seperate 120v circuit for a total power of ~8800 watts at the start, dropped to the 7000s then stayed around that point until failure at 30 seconds. Prior to this video we had JUST finished plugging it in to one socket in series for around 2000 watts for FIVE MINUTES - so it was already hot! The Monster lives up to it's name. If you are wondering about the frame... Brandon had two in his wall without motor supports and it broke off some of the screws allowing the bottom to swing out and break off the top of the frame. So... motor supports are a must.

Can someone tell me how efficient is it ? did someone compare it to other LOUD SOUND QUALLITY sub like the FI-Q or AA-Havoc ? Thanks

Well i have finally gotten around to installing my saz2000d to power my 15inch NS at 1ohm! and let me tell you! it is loud!! Something i did notice though was with the sae1200 i would have a voltage drop of like 14.4-12.8 on the money and that was with the amp set with a dmm at 60hz at 1000rms. But with this 2000 in my trunk i get voltage drops of 14.4-12.8volts and that is set around 2000rms at 1ohm! also i was monitoring my voltage drop with a stinger voltmeter and the car was at idle which is about 750rmp. so i don't know i s12.8 good? should i upgrade my stock alt? right now i have 2 batcap 2000s in the rear and the big 3 done and that is it for upgraded electrica…

What electrical setup do i need to power a sundown 4500d at 1 ohm? What size alt? what wire size? what size battery? how many batteries? what battery brand should i get? Thanks, Mike

In addition to recieving my 1200d yesterday I also recieved one of the pairs of SD1v2's (10's) I bought on line. The boxes that they were shipped in were the original boxes from Sundown. When I got the boxes I kinda cringed because they were soft like pillows but not so fluffy.... (yes they were beat that bad...) well I opened up the boxes and the subs are fine! way to go Sundown for making such a strong little sub! I have seen subs bent and broken in boxes that looked better than these many times but these little guys did great! Now I am trying to figure out how to get 4 of these in my MINI with a 1200d!

Got my 1200d yesterday, SWEET amp! one thing I still need though, A remote gain knob. Anyone have one taking up space and want to part with it? I need to be able to turn it down when the wife is in the car. Thanks all! David By the way, this amp is a healthy beast!

Well I ordered a Sundown SAX100.4 and a SAZ1000d for my brother yesterday. He drives an 08 standard cab Chevy Full size. He will be running PPI 365 CCS components, a DD T1510 in a PWK enclosure and KNU wire. Only thing not ordered is what the factory deck will connect to processor related. I am leaning toward either a Cleansweep or Alpines H650. Can't wait to get the stuff going. For under 600 bucks for amps... What a bargain. Will have the install on here when we start.

got a stock alt still, it's a 92' camry wagon (dont know what the amps are with that) and (2) 3500d's and (2) 3100's....should I get a volt meter just to be on the safe side....Im not sure how long I should play the system with just a stock alt?

Install is thursday morning..and im just checking....I have 2 18" Btls fully loaded Dual 2's and 2 Saz 3500d's, amps are gonna be strapped...this is the best configuration? Thanks, Freddy

http://motormusicmag.com/news/397/53/The-Vinny---MECA-3X-Soundfest.html

Hello All, Im finally going to install my amp I bought a few months back and have a few questions. Let me start by telling you were Im at. Im going to be installing an Sae-1000D amp powering an RE SE 10" rated @ 600watts @ 2 Ohms. I also have a 4 ch PPI amp bridged 160 watts running my front components. The car currently has 4 ga wiring. Would 4 ga still be enough to run the 1000 and PPI amps. Also what size fuse should I use for the power wire. Thanks in Advance, Mike

with my 2000d + 2 12xcon setup. is it possible in the future to strap an amp with less power to the xcons. for example can i strap and saz2000d and a saz1000 together? or do they have to be the same?

Went to my first show with the new SAZ2000 and i broke my record last night!! My old record was a 150.3 at 47hz just by changing out my SAZ1500 to a SAZ2000 i picked up .9 so my new score was a 151.2!!! Not bad for one 18 and 2000w!! The 2000 is a little beast just like the 1500!

http://www.mecacaraudio.com/

I just hooked up my amp, set my gains, hooked up the sub, and I am getting zero output out of the sub. The sub is an SSA Icon D2 10", wired in parallel to 1ohm. The amp is a Sundown SAE-1000D, bought refurbished from DB-r. Headunit is a Pioneer DEH-P6000D for reference. It is hooked up exactly like this, except I only have one positive and one negative coming from the subwoofer, and they are connected to the positive on the left, and the negative on the left. I played a 50hz test tune, set my volume to 45/60, and adjusted the gain until it was at 30V at the speaker terminals on the amp. (a little below 31.6, figured that would keep me on the safe side) Then I hooked u…

Is there anyway to achieve bandpass filtering???? For example if I am running a pair of MLI65's and I want to restrict them to frequencies between 70Hz-2.5kHz, is that possible with this amp or any other 4-channel? Thanks