Sundown Audio

Hey guys! Well I finally got the amp from Mark today. Just thought I would take a bunch of pics and share them to everybody! The amp looks so sweet! I love it already even though it's not hooked up yet Some of the pictures came out a little blurry because I didn't use flash for most of them but its ok. Can't wait to get this baby hooked up!

on the e8's what does the e stand for?

Can someone please tell me when the last day to preorder the 4500d will be? Thanks, Mike

will b building a new box soon, & tryin to figure out how much port area you'll recommend 4 a 15" ns in a 3.5 cube box? I have it n a 4.8 cube box now, & it sounds good. using 3 4" aeros @ 32 hz. not sure if I want to use the aeros or a slot 4 the new built, would like to use the 3 4"s but ill b to long 4 my box. so I'm thinkin maybe only usin 2 4". what u think?

In response to the current economic situation we are lowering our MAP pricing. Cost for our amps from an authorized dealer outside of a pre-order or special sale have changed as follows : SAZ-1000D : $355 OLD / $315 NEW SAZ-1500D : $570 OLD / $500 NEW SAZ-2000D : $670 OLD / $615 NEW SAX-125.2 : $255 OLD / $240 NEW SAX-100.4 : $395 OLD / $365 NEW The prices listed under "NEW" are now available at any authorized Sundown dealer. I sent out a dealer news-letter this morning, so if your dealer has any questions have them call me.

I've just opened up the tummy of my amp and discovered that one of the coils or inductors are touching one of the fuse legs, is that anything to worry about? and uhhh hope i havnt just got rid of my warranty?? ehh.....prob doesnt matter anyway because it will be over a years time from purchase that i may actually use it lol... I'll post a pic in a sec!!

I bought out all of the QC failed SI BM 10s (old models) and re-built them with several changes: 1) Slightly longer flat-wound coil (original was round wire) - USA made coils 2) Narrower / Taller Surround 3) Tied down tinsel leads Measured T/S Specs (coils in series): RE: 6.89 ohms Z: 8 ohms Fs: 27.2 Hz Qes: 0.56 Qms: 3.32 Qts: 0.48 Le: 2.8 mH Vas: 31.1 L BL: 16.2 NA Mms: 124 grams Power: 400 watts RMS 0.95 ft^3 SEALED BOX - F3 of 41 Hz 1.5 ft^3 ported tuned to 30 - 35 Hz for high output I have about 40 of these... $125 shipped in the continental USA for one $240 shipped in the continental USA for two $440 shipped in the continental USA for four Ask about more than th…

got my saz-2000d and sax-100.4 in the big brown sleigh today. loving this support i need to get to work installing these.

I need to mount two amps together. One on top of the other. What is the easiest, best way to do this. I also need to keep them as tight as possible due to space limitations. Any suggestions?

Who would be interested in seeing this come back ??

Well i have finally gotten around to installing my saz2000d to power my 15inch NS at 1ohm! and let me tell you! it is loud!! Something i did notice though was with the sae1200 i would have a voltage drop of like 14.4-12.8 on the money and that was with the amp set with a dmm at 60hz at 1000rms. But with this 2000 in my trunk i get voltage drops of 14.4-12.8volts and that is set around 2000rms at 1ohm! also i was monitoring my voltage drop with a stinger voltmeter and the car was at idle which is about 750rmp. so i don't know i s12.8 good? should i upgrade my stock alt? right now i have 2 batcap 2000s in the rear and the big 3 done and that is it for upgraded electrica…

More power this time... current clamp shows ONE coil. We hooked each coil up to a seperate 120v circuit for a total power of ~8800 watts at the start, dropped to the 7000s then stayed around that point until failure at 30 seconds. Prior to this video we had JUST finished plugging it in to one socket in series for around 2000 watts for FIVE MINUTES - so it was already hot! The Monster lives up to it's name. If you are wondering about the frame... Brandon had two in his wall without motor supports and it broke off some of the screws allowing the bottom to swing out and break off the top of the frame. So... motor supports are a must.

Went to my first show with the new SAZ2000 and i broke my record last night!! My old record was a 150.3 at 47hz just by changing out my SAZ1500 to a SAZ2000 i picked up .9 so my new score was a 151.2!!! Not bad for one 18 and 2000w!! The 2000 is a little beast just like the 1500!

What electrical setup do i need to power a sundown 4500d at 1 ohm? What size alt? what wire size? what size battery? how many batteries? what battery brand should i get? Thanks, Mike

I wonder what could be going on here?

Can someone tell me how efficient is it ? did someone compare it to other LOUD SOUND QUALLITY sub like the FI-Q or AA-Havoc ? Thanks

Talk to your favorite dealer or send me a Paypal to [email protected] along with a list of what you are ordering. Sale prices are SHIPPED in the continental 48 states - contact me or your dealer of choice for a shipping quote to AK or HI. SALE FOR USA ONLY - any pricing matters outside the USA handled by local distributors! We are celebrating the 4th of July AND our 3rd year in business (thanks to all of our customers) so we decided to have the biggest sale we have ever had ----- SAZ-2000D $490 SAZ-1500D $440 SAZ-1000D $280 SAX-125.2 $205 SAX-100.4 $315 SAX-50.4 $205 Nightshade 12" $410 Nightshade 15" $430 Nightshade 18" $450 Z Series 15" $300 SA Series 12" $175…

I will be leaving on the 25th and coming back on the 30th. I will answer some e-mails while I am gone -- but most likely not all of them, it is supposed to be a vacation after all. Brandon will be at the shop Monday - Wednesday while I am not so he will handle as much as possible without me being here.

Well I ordered a Sundown SAX100.4 and a SAZ1000d for my brother yesterday. He drives an 08 standard cab Chevy Full size. He will be running PPI 365 CCS components, a DD T1510 in a PWK enclosure and KNU wire. Only thing not ordered is what the factory deck will connect to processor related. I am leaning toward either a Cleansweep or Alpines H650. Can't wait to get the stuff going. For under 600 bucks for amps... What a bargain. Will have the install on here when we start.

In addition to recieving my 1200d yesterday I also recieved one of the pairs of SD1v2's (10's) I bought on line. The boxes that they were shipped in were the original boxes from Sundown. When I got the boxes I kinda cringed because they were soft like pillows but not so fluffy.... (yes they were beat that bad...) well I opened up the boxes and the subs are fine! way to go Sundown for making such a strong little sub! I have seen subs bent and broken in boxes that looked better than these many times but these little guys did great! Now I am trying to figure out how to get 4 of these in my MINI with a 1200d!

Got my 1200d yesterday, SWEET amp! one thing I still need though, A remote gain knob. Anyone have one taking up space and want to part with it? I need to be able to turn it down when the wife is in the car. Thanks all! David By the way, this amp is a healthy beast!

how much is a 15" nightshade recone kit sent to me?

I just hooked up my amp, set my gains, hooked up the sub, and I am getting zero output out of the sub. The sub is an SSA Icon D2 10", wired in parallel to 1ohm. The amp is a Sundown SAE-1000D, bought refurbished from DB-r. Headunit is a Pioneer DEH-P6000D for reference. It is hooked up exactly like this, except I only have one positive and one negative coming from the subwoofer, and they are connected to the positive on the left, and the negative on the left. I played a 50hz test tune, set my volume to 45/60, and adjusted the gain until it was at 30V at the speaker terminals on the amp. (a little below 31.6, figured that would keep me on the safe side) Then I hooked u…

got a stock alt still, it's a 92' camry wagon (dont know what the amps are with that) and (2) 3500d's and (2) 3100's....should I get a volt meter just to be on the safe side....Im not sure how long I should play the system with just a stock alt?

Got it for $200 shipped! Im so excited! There are two more left on ebay starting at $150! Ill post some pictures when i get it!!!