Sundown Audio

I use a ~$300 DMM to measure our coils here at the shop... why ? Well I'll show you... * Our Dual-1 coil on a cheap meter. * On our meter - factory spec is 0.84 ohms +/- 12%. This thing is dead on. * Our Dual-2 on a cheap meter. * On our meter - factory spec 1.85 +/- 12%. Again... 12% variance allows up to 2.07 and the meter only reads to the tenths place so it is dead on. So. Keep that in mind when reading your coils on a cheaper meter.

Hey Sundown why is there no enclosure recommendations on the Zv2 on the subwoofer page also for the Nightshade too? I see recommendations for the SA series and other series.

I just recieved (1) 1500d v.1 and (1) 1500d v.2 last night. Looking at each of them they look exactly the same and I can not tell which is which. How can I tell? and can the two be strapped together? If not I still have another v.1 so no worries.

I got first place in my class at a small local show with 3 RE SX 15" tuned to the low 30's and two sundown 1500's. My score was 147.2 playing a test tone sweep since I dont know my peak freq. We didnt even know about the show, and was actually headed to my family reunion when I saw guys getting metered outside of a car audio shop. I could get better numbers with a box tuned higher, but my setup is for LSQ, and I really like the SQ of my current setup. with some tweeking, I believe I can get 150db with my box, but I still havent had a chance to tweek my system with a mic. The SAZ 1500 is a badass amp that allows for a lot of flexiblity with installation.... I cant wait t…

I have a freind that claims to be a Team Sundown member who says he can get a SAZ-10000d. I told him I've been reading the forums and the newest amp your working on is the SAZ-4500d and he must be confussed. He was drunk at the time and wouldn't listen to me. So my question is, are you really working on a SAZ-10000d or is he just a drunk idiot?

will b building a new box soon, & tryin to figure out how much port area you'll recommend 4 a 15" ns in a 3.5 cube box? I have it n a 4.8 cube box now, & it sounds good. using 3 4" aeros @ 32 hz. not sure if I want to use the aeros or a slot 4 the new built, would like to use the 3 4"s but ill b to long 4 my box. so I'm thinkin maybe only usin 2 4". what u think?

im considering 2 SA-12's sealed 1.5 each off a sae-1200d. This sub work well sealed? Im curious about xmax specs on them.They seem VERY well built which is one of the reasons they are a top choice atm

i am currently running 4 10's and i will be running 2 1200d's would i be better off running 1 amp per 2 subs or should i strap them both and run to all 4?

A pair of saz1500d's strapped or a saz-3000d I am looking to upgrade from my ssd's to FI-q's in the near future and would like to know when the release date is for the 3000d as I need them for the comps I attend? and also any comps down there in NC anytime soon?

1 Saz-3000D 2 Nightshades 15 D1 Wired for 1ohm All 8 gauge with a + and - Bolt in the box From 1+ terminal on amp to + bolt From 1- terminal on amp to - bolt 1+ wire from inside bolt to + on left sub another + wire from inside bolt to + on right sub 1- wire from inside bold to - on left sub another - wire from inside bolt to - on right sub Left sub: + to - right sub: + to - It looks just like the diagram but I'm a little OCD and feel the need to triple check everything

Well im a big fan of Sundown and recently aquired a 3000D now im using one of the clasic Opti AMps and might be able to sell and was considdering saz 4 channel. Neetless to say if they keep doing what they are doing ill never buy a different branded Mono but my question is about the 4 ch Ill be using it to run active so crossover points not that important but being loud and sounding clean will be. It will be the older labeled model but it will still be un used. IDK if that makes any difference

I'm ready to play with the big boyz so i'm looking to get a second SD 3kd. So if anyone has one they will let go for 500 shipped let me know. I also need a Term lab. I'll do 450 shipped on that. Someone help me out. Got money now!!!!

hi im wondering if you guys sponsor any cars. im asking this because my stepdad is the one to sponsor. type in gabe cestaro at google and youll see the car he built. he has been in good guy car mag and super chevy mag. he has a 62 impala show stopper, we will be at the dub show in charlotte comming up next week.im trying to get my step dad into car audio and be sponsored b/c his cars are the chit. come see the impala. we have a new car being built as we speak.sponsor the new car and all the hotrodders of america will want your amps.

1 ohm dcr for a daily driver in a WRX Sedan?

Ordered 4 Sundown 3000D amps that were delivered Thursday. I will run them on a 16 volt system. Also what size alt and number of batteries to use. Should you use 8 volt batteries or 16 volt batteries. What are the advantage of each.

Ok I sold my 18btl an looking to get 4 15Z do i have enough room to run them I have 38x38x26 to work with if so can someone help me with a box design will be ordering the subs if I have enough room by next Friday thanks for time.

Of course... Took the stupid JBL's out again since I'm still waiting patiently on my 18" and had a fun time today.....Did a 147.3 last weekend with them @ 2 ohm...decided to resin the box and drop it to 0.5ohm to see what she'd do....Heres the results.. Went to a show out in Frisco Texas with the car...took 1st place in my class and High SPL of the show....a ton of SQ cars there...A few guys were doing 149.2's and 148.9's.....I ousted them...with Sundown Power... 1 SAZ 3000D 2 12" JBL's Power Series in the back seat.. 3 DEKA 9A31's Gain - 0 Bass Boost - 0 A few pics... The set-up... The Score... The ownage.... 1st place and high SPL...

I was wanting to know when the 2000d model amp is coming out. Im piecing my system now and am goin to be buying an amp in about 1 month. Was wanting to get SAZ-2000D amp, but if its now out in time I will get the AQ2200D

Hey guys! Well I finally got the amp from Mark today. Just thought I would take a bunch of pics and share them to everybody! The amp looks so sweet! I love it already even though it's not hooked up yet Some of the pictures came out a little blurry because I didn't use flash for most of them but its ok. Can't wait to get this baby hooked up!

Currently running a 3500 at 1ohm. Haven't clamp metered it yet but what sort of voltage should i be seeing across the speaker terminals. Reason i ask is sub sound awesome at 71-72v but one notch more on the vol sends it up to 75v and I loose output and the sub makes a fart noise. Cheers your brother from across the water.

Just swapped out my US Amps for some Sundown Audio amps. Sad to see the ol' faithful US Amps go, this was VERY hard to do. I must be a responsible sundown dealer and use the stuff that I sell. I did consider slapping a sundown sticker on the US Amp heatsinks. Old install I still have an Fi Q12 and the Sundown SAZ-1500D is my first ever class D amp. I metered at 140.5 db. Pretty damned good if you ask me for the bass eating BMW trunk. A 2.3db gain since I was metered using the sub brand new with a super stiff suspension. Measured by a termlab in the pass side kick panel. Peak freq was 47hz. The reading might be a little higher since I was inside. Electrical: Stock…

First off... I have to ask: will it be as efficient as a brand new one? Secondly... what voltage should I expect the true 1K RMS @ 1-ohm?

Is there anyway to achieve bandpass filtering???? For example if I am running a pair of MLI65's and I want to restrict them to frequencies between 70Hz-2.5kHz, is that possible with this amp or any other 4-channel? Thanks

After they are discontinued and replaced by the 2000? I plan on buying another in a few months and dont want to have to buy a completely different amp, would like to match the two.