Sundown Audio

how much is a 15" nightshade recone kit sent to me?

cant find any documentation on this amp ... ik its not out yet

what is the mounting depth for them and what is the sensitivity on them? ... how would they do in a sealed box? ... what size sealed box do they typically need?

I have just installed my saz1000D : wow !!! I had a JL A1800D (650 watts at 4 ohms), and now the Sundown at 1 ohm. I was not expecting such a big change in output!!! It's'another world !! Couldn't be happier Now my Icon 15 is playing loud, low, and always sooo clean. But I wonder what to do with the remote provided : is it for the gain? Is it for bass boost? How to use it? Please, let me know.

I wonder what could be going on here?

I will be leaving on the 25th and coming back on the 30th. I will answer some e-mails while I am gone -- but most likely not all of them, it is supposed to be a vacation after all. Brandon will be at the shop Monday - Wednesday while I am not so he will handle as much as possible without me being here.

Setup 1998 Ford Explorer. 4 DD9515 D2, 12 Kinetik 2400, 1 Kinetik 1800(front bat), Missing Link, DC Power Alt, Kenwood KDC-X8120. 23Cu.Ft. Enclosure tuned @ 39Hz. Right now on burps starts at .4 dcr rolling the volume at note it rises to 1.12Ohms @ 49Hz. 71.5 volts, 63.7 amps, drops to 13.2volts dc. If my calculations are correct that would be 4554.55 watts. Current score 157.6 @ 49Hz outlaw.

dB-r Electronics Sundown Audio Refurbished Sale! http://www.db-r.com/sell/store/ Lots going on in this sale: SAE-1200D Clearance 57% Off SAZ-3000D 25% off Sale! 10% Off all other Refurbished Sundown Audio Amplifiers SALE DETAILS: Clearance: SAE-1200D Refurbished $125.00 - 30 day Warranty, Various cosmetic conditions, some with box, some without, some with remote, some without, first come first serve! 25% Off all Refurbished SAZ-3000D's 1 Year Warranty SAZ-3000D New Style Heatsink A-Stock - $566.25 SAZ-3000D New Style Heatsink B-Stock - $555.00 SAZ-3000D Old Style Heatsink A-Stock - $555.00 SAZ-3000D Old Style Heatsink B-Stock - $525.00 10% Off all Other Refurbished Su…

2x Sundown Nightshade 18s 2x Sundown SAZ-3500Ds Only four 16v batteries Steve is officially louder than my best score Looks like I need to do some work!

I just got my saz 1000d amp and saw that it had 2 sets of speaker outputs labeled A and B. Do i only need to use one of them for one sub to get my full 1000 watts or both of them?

I ordered a 3500D and now looking into purchasing a second battery. I currently have an older group 34 optima yellow top under the hood, 1/0 gauge wire ran to the trunk and the big 3 done. I'll be buying a 200 amp alt soon as well. I'm having a hard time deciding on which battery is the best between the Kinetik HC3800 or the PowerMaster D3100. I'm unable to find the complete stats on both. Some stats I have found, the Kinetik has 135AH and the PowerMaster has 117AH. The Kinetik is rated for a 3800 watt system and the PowerMaster 4000/5000+ watts. I havent been able to find CCA or CA for either although I did find the PowerMaster is rated for 3,200A Max Amps. The Kinetik …

I was at a show this weekend and was gonna meet up with a friend up there. When I got there, my friend and his friend were working in the trunk of his car on his amps. I asked what was wrong and he said that his amps were clipping, so he was unstrapping them. Then he said that the Sundown amps perform better unstrapped. He had them strapped at one ohm, and unstrapped at .5 each and said they do better unstrapped...I'm not too sure on his electrical by the way. So my question is, is what I was told true? Thanks.

Ok, the last couple of shows I've been to I have been down a few tenths. 157 at the Vinny, 156.9 this weekends Madvette show. I know my voltage has been an issue, but I'm working on that. So I discovered (by accident) another way to wire my subs to a lower load, and my amps don't go into protect.

can the sae 1200 be linked or not??????????????

my friend has 3 single voice coil 4ohm pioneers and he asked me what would be a good amp and i recomended a sun down SAZ-1000 but it would be ran @ 1.33 ohms on around 12.9 volts. each sub is 400 watts RMS so thhats 1200 watts RMS. i was wondering if anybody could tell me about how many watts the sundown would put out under these sercumstances. i dont how much extra power the pioneers could handle so i would like the RMS a lil bit lower then 1200 just to be safe. they r also a few years old.

These are from Derrick's Explorer : Starting battery + 2x Powermaster D3100s used for testing 3980 @ 0.25 rising to 0.65 @ 11.2v (engine on) 2050 @ 1 rising to 2.44 @ 12.2v (engine off) ----- These are from Ray Farmer: Okay, I have done my SAZ3500D 12volt power test. I would like to say, WOW!! My nominal ohm load was 0.5 ohms. I did plenty of test but I got the amp to do its power at the proper settings and did 3 test and took the average. I used 2 x NSB-g3100 to power the amp, Starting voltage 13.2 Test 1 75.1 volts 39.9 amps 2996.5 box rise 1.88 voltage drop 12.2 Test 2 75.1 volts 37.7 amps 2827.5 watts box rise 1.99 voltage drop 12.1 Test 3 76.0 volts 39.5 amps 3002.0 …

I'm about to order a dual amp kit from KnuKoncepts: http://www.knukonceptz.com/productDetail.cfm?prodID=KFX-PK20 What are the correct fuses I would need for the Inline Fuse and the Fuse Block for wiring up a 1500D and a 50.4. Thanks

I was wondering if I could run the SAZ-3000D daily @ .4DCR. Current system setup 4 DD 9515D2 18Cu.Ft. Box tunes @ 42Hz, 12 Kinetik 2400, 1 Kinetik 1800(Front Bat), Missing Link, DC Power Alt, Idle voltage 14.4 Idle amps 140, 2k RPM 275 amps, 14.4 Voltage. Just wanting to is if this would be ok.

Anyone have this new amp up and running yet. How is the power of it?

Hello all. I have a 2007 Kia Sportage with 2 Nightshade Dual 2 ohm 15's powered by a Sundown SAZ 3000D amplifier. I have the Big3 done and everything is deadened except the roof. That will be done with Damplifier Pro in the near future. I have 2 Optima Yellowtop D-34 Batteries in back for the amp and a smaller yellowtop under the hood. Here is a pic of the setup. I turn my subwoofer box up and get better numbers. My best to date is 149 Sealed on the dash. All I want is one more DB. I would appreciate anybodies input on how to gain 1 more db.

So I have been thinking about going to 16 volts. What do you guys think? How much more power should I expect to see from the 1500's?

Ok Has anyone tested the 1200D at 2 ohms and 14.5v? What can I expect for power? I have a pair of DD 1008a's I want to power with it. Opinions? David

Ok I'm new to this strapping amps thing but currently I have 2 saz.3000d's and 2 21" incriminator audio dp's (they r both d1's) right now I have them both wired at 2ohms each and was wondering what kinda load am I getting out of each amp??? Am I pulling 2ohms from each amp and that wud be both amps strapped at 4ohms??? This is where I'm confused abt...also if I wire each sub down to .5 what kinda load will I pull out of each amp??? Will it be .5 out of each amp making it 1ohm strapped or will I be pulling .25 out of each amp??? Really confused was wondering if neone cud help me out thanks

ok heres my question (sorry if i seem like an idiot lol), I own a saz-1500d, and im planning on going with a single AQ HDC3 15" but what has had me stumped is if to buy a dual 1 ohm and wire the sub in series and then bridge it to the amp, or would it be a dual 2 ohm wired in parallel and connected to one of the inputs and not bridged, because what im trying to achieve is to have the amp play at 1 ohm at 1500 rms. the reason why i ask is because on the forum here i saw a a post that says the amp is not bridgeable, because it is a 1 ohm mono, but then on the manual the diagram appears as if it is bridgeable if going with a single sub setup, im obviously reading one of th…

All will be shipped by Friday at the latest. We started shipping some last Friday. So no need to blow up my e-mail and PM box