Sundown Audio

Hello all. I have a 2007 Kia Sportage with 2 Nightshade Dual 2 ohm 15's powered by a Sundown SAZ 3000D amplifier. I have the Big3 done and everything is deadened except the roof. That will be done with Damplifier Pro in the near future. I have 2 Optima Yellowtop D-34 Batteries in back for the amp and a smaller yellowtop under the hood. Here is a pic of the setup. I turn my subwoofer box up and get better numbers. My best to date is 149 Sealed on the dash. All I want is one more DB. I would appreciate anybodies input on how to gain 1 more db.

Sundown's website just got a major over taking. Switched over to a new platform. Great looking product pages, FAQ section are just starters for this. Check it out and see what you think! Brought to you by: LFTNdesign http://www.sundownaudio.com

Finally cleared out most of the used item inventory I had accumulated... so I am ready to accept some more trade-ins. For now trade-ins will only be towards pre-orders of the SAZ-3500D. Contact me w/ trade-in quote requests.

$485 from April 19th on until they arrive around the end of June (ETA is around the end of June). 500@4ohm 1000@2ohm 2000@1ohm Rated at 12.8 volts ALASKA AND HAWAII ADD $15 Regular MSRP = $899 / MAP = $625 PROTOTYPE PICTURES: * Production models will have the mirrored part number like the 1500D. * SAZ-2000D requires external fuse. Production will have the "new case" with internal fins. * SAZ-2000D in the center You can see test results vs. our other amps here: http://www.soundsolutionsaudio.com/forum/i...showtopic=24776 --- THIS IS FOR USA ONLY. To pre-order internationally contact your local distributor: http://www.sundownaudio.com/dealers.html#international CANADIA…

Ok I'm new to this strapping amps thing but currently I have 2 saz.3000d's and 2 21" incriminator audio dp's (they r both d1's) right now I have them both wired at 2ohms each and was wondering what kinda load am I getting out of each amp??? Am I pulling 2ohms from each amp and that wud be both amps strapped at 4ohms??? This is where I'm confused abt...also if I wire each sub down to .5 what kinda load will I pull out of each amp??? Will it be .5 out of each amp making it 1ohm strapped or will I be pulling .25 out of each amp??? Really confused was wondering if neone cud help me out thanks

Ok Has anyone tested the 1200D at 2 ohms and 14.5v? What can I expect for power? I have a pair of DD 1008a's I want to power with it. Opinions? David

ok heres my question (sorry if i seem like an idiot lol), I own a saz-1500d, and im planning on going with a single AQ HDC3 15" but what has had me stumped is if to buy a dual 1 ohm and wire the sub in series and then bridge it to the amp, or would it be a dual 2 ohm wired in parallel and connected to one of the inputs and not bridged, because what im trying to achieve is to have the amp play at 1 ohm at 1500 rms. the reason why i ask is because on the forum here i saw a a post that says the amp is not bridgeable, because it is a 1 ohm mono, but then on the manual the diagram appears as if it is bridgeable if going with a single sub setup, im obviously reading one of th…

This was at a Meca 3x event on Sunday. Team Sundown was in full force! Top 3 SPL scores of the day. And iirc 2nd in each of these classes were using Sundown. Gary Fletcher - 157.00 Paul Strouth - 155.00 Josh Newton - 154.7 Congrats to all Team Sundown members who competed @ this event.

so lastnight, a guy caught up to me that has been looking to flag me down while in my car.. hes a local paint and body guy with a shop.. and he was told i was the loudest around... so he was telling people here in town that he wanted 4 15 and yadda yadda... so i have him a demo..and he jumped out 5 seconds in.... anyway long story short he wants my system in his car.... and im ready to come up... so lets talk about it... i wanna use the same box i have as its not gonna work for him anyway. im 6 cubes internal after port and subs. for 2 15's i want to either step up to the 3500d or the 4500d amp wise... and im wanting a pair of subs that will be a jump up from the n…

I am currently running a Kenwood eXcelon KAC-x40 for my comp set and I have had no issues with any whine or hum coming through my comps. However, yesterday after swapping out my SAE-1000 for the SAE-1200 I now have a whine in my comps when I plug the RCA's into it. With the volume at 0 the whine is still there. I think it is odd that I am getting a whine in my comps when plugging the RCA's into my sub amp. When I remove the RCA's from the SAE-1200 the whine goes away completely. Any insight into this would be more than appreciated. Thanks!!!! Head Unit: Kenwood DNX-5120 4-Channel RCA's: JL Audio XB-CLRAIC4-18 2-Channel/Sub RCA's: JL Audio XB-CLRAIC2-18 Power &a…

Hey Zach - shoot me an e-mail... have a check here stating it is for a payment towards your 3000D. I cannot seem to find anything about this in my records... so let me know! I also don't seem to have your e-mail address hence the post

Hey guys i had a fast question to ask! I have a new h/u a kenwood KVT-817DVD single-din flip out monitor and it has a processor which it uses inconjuction with the deck. It has a sub pre-out but ONLY 1 and not 2 RCA out puts for the sub. So i was wondering if i need to use 2 sets of RCA's to plug into the amp or can i get away with 1 rca and just turn the gain up? amps: SAZ2000 and SAE1200 sorry if i am unclear on what i am asking. ALSO how do you calculate impedance rise? or do you just hook your DMM meter up to the sub after running the sub for a bit? also i have heard of a device called a AM-500 Accumatches and i was wondering if they are any good? or worth the in…

Four in my Explorer powered by a single saz-3500 @ 0.5ohm. They love it. These subs are truly little beasts. You need to hear them in person to understand just how good they sound and how loud they can get. And they're a good price too. Playing DJ Billy E Playing Gorilla Zoe - Juice Box screwed More vids coming later. Gotta get home to upload them off my actual video camera.

Termlab 136.7 @ 55hz on the glass sealed 144.2 @ 34hz at the kick driver door open 158.9 @ 26hz at port All in all =

with a $160 sony digi. drivers door open, and i think 25 or 26 out of 32 on the h.u, loudest i play it on music all tuned by ear also have PG rsd's on a concept 75x2

im fitting my FiQ 15 bp and sundown saz 1000 this sec its 2.3^3 box sealed, was just wondering a rough guide line to set my LPF, Subsonic, phase at? listen to rap, thanks

I'm seeing the sale, and I want to pick up another Sundown amp. I seriously don't need a new one right now, but those prices are just to good. I currently run the SAE-1000D to my Mag v3 and I'm happy with the little black amp. I see no reason to replace it. But I am curious, how different is the SAZ-1000D compared to the SAE-1000D? I read about the SAZ being more bulletproof than a SAE but, I'm don't really need to push my amps to their limits. Is the SAZ slightly underrated? (your 1200D amps comes to mind). Now I have 20 more days to decide.

Here is my set up......so far Head Unit - Pioneer Premier DEH-P690UB Front Stage - Hybrid Audio CLarus 6.1 Sub - Image Dynamics Q12 (DVC)...just one Question is which amp would work best....the SAX 125.2 (bridged) or the SAZ 1000D? Also, I'm looking at going active setup. Will the built in crossovers in the SAX 100.4 work as an active setup? Thanks

What kind of power will a pair of SAZ-3000d's put out at 1 ohm? Just looking for an estimate.

This my new setup: 3-Sundown SAE1200D's 3-12" T3 Audio TSS's 2-Kinetiks 2000's in the rear 1-RedTop under the hood And it doesn't sound that good to me. I did have 2 Fi SSD 10's on 1 1200D and this doesn't sound much better.....I don't know what to do next.......any suggestions?

Here is my situation. I am in the process of redoing my system and I am currently only running the Image Dynamics CTX65CS comp set up front. Next I plan on dropping a pair of Image Dynamics CX64 V.2 mid-bass speakers in my rear doors. Between the 50.4 and the 125.2, which do you think I can get the most performance out of? My thinking is that with the 50.4 I have more tuning options, and with the 125.2 I will have more power. Both sets of speakers are 4ohms. What do you think???? I know the 100.4 would be the better option, but I don't have the space to fit it nor do I want to spend that much more.

I'm not telling

Pictures from the factory : I will be going with a rubber gasket for production. Hoping to have this prototype soon... it's been delayed a few times.

Hello, I have just purchase a SAZ1000D but I wonder if this amp really accept 0 gauge power wire? I have 0 ga from the battery to a distribution block in the trunk, then 4 ga to my 2 amps. Is it good enough for the Sundown I'm waiting for? Or do I have to change the distribution block to power the new amp with o ga wire? Btw, how long should I wait for the tracking number, pleaaaaaase?!!!! Thanks

Does anyone have the official outside and mounting diameter on the sa-12's? thanks