Sundown Audio

What electrical setup do i need to power a sundown 4500d at 1 ohm? What size alt? what wire size? what size battery? how many batteries? what battery brand should i get? Thanks, Mike

I plan to get two SA 12s along with either a sax 1200 or saz 1500. I need some box dimensions and what one of those amps to get. I mainly play rap with a lot of lows if that helps. Thanks! Out of all the designs on here there are no dual 3.5^3 enclosures, and those don't list the frequency.

here are some pics of the event i couldnt take part since i killed the solo x while testing, because one amp gone in protection while burping a 148, maybe 2 optimas arent enough to run strapped 3ks at 0,5ohm each? waiting for the spair and gonna try it again with better batteries. it was one of the biggest car audio events in germany over 200 competitors in db drag, db cup, bass race, spl classics and AYA many broken world records in cup and drag

Well first comp of the season yesterday, I was not really prepared, my resin on my box wasn't completely cured, I hadn't done any testing, my car looked like crap... but I went anyways. I hit low yesterday, but was having issues all day. Final run for head 2 head eliminations was a 139.1 in street A. Good enough for first place. Street B was won by TJ (goes by old/skool on termpro) with a 151. something. Street C was won by my friend Matt in his ford festiva with a 138.6. Bob the guy with the blue van and all the t3 woofers was there doing mid 60's all day, it was impressive. Bassrace, I came in third in the 139 class, I wanted to be in the 129 class but qualified with…

I bought a used ns motor on here but the screw to attach my new 18 basket to the motor i dont have. dose anybody know the thread pitch and diameter? i dont really want to haul this motor around the hardware store trying to match sizes. thanks guys

Great customer service. The Distibutor *edit(delivered) the amp of right at my door. Needless to say I am one happy customer. But and a Big BUT there is a black mark on my power terminal ??? I know it is possible during the connection of the amp while testing but is this something I should be worried about? I will install Friday and if it works then I suppose i would be happy yet again, but im just worried if it may cause problems down the line.? is this something to be concerned about?

going to be running the 100.2 or 125.2 on my 2 sets of PG rsd 6.5" components, so i wanted a matching sub amp. so i figured the saz1000d would be a nice match, nearly the same length in size, etc. so, how many subs should i run off this 1000d, where each sub wont be getting too much power for a daily setup? its for the back of the dakota, its a single cab, so not alot of room at all, thats why im thinking about going sealed, and jacob said they do good in about 0.2 cubes each.

alrgiht guys need some help i had 4 hc2400 battery going in the car. well a customer came in a bought all 4 for $350 a piece will two yellow tops support both the 2 sundown 3000ds until i can get 4 hc2400s again. i get them now but there out of stock.

So while my car was in the shop for near a month I made a new enclosure. I also made a big math error on the width. Meh we are all human, so instead of just junking it, I decided to recycle it and make a newer box with a 6" aero port. Here is what the box started out as. And here are some of the steps in recycling it to a new enclosure. And here it is prior to being loaded in the car. And here it is in the hatch. The low bass response is much greater with this box. Here is a quick video I did in the driveway, I may do more just gotta find a spot where I don't piss off all the neighbors.

Didn't sustain any damage to the shop or anything inside the shop. That's the good news, the bad news is that the shop doesn't have power and may be a while before it does. The server is back up (it is not located at the shop) and we do have some battery backup power and a generator at the shop, problem is finding fuel for the generator, things are VERY hectic at any Store that has working gas pumps so we may or may not be able to get things rolling and powered up with the generator. It may be a while (several days or more) before Centerpointe Energy restores the power in the shops area, as we are 45 miles from Houston, and they are mainly focused on getting the powe…

A buddy of mine gave my brother a free E8 that he thought was blow, the former was just bent. So we fixed it and it works great!!!

i know some rca's dont work when trying to strap amps, so im wondering if anyone is using the knukonceptz karma SS wires to strap their amps with success. these: http://www.knukonceptz.com/productMaster.c...%20RCA%20Kables

That is all.

at a local show. pretty good number with 4 1500's on 6 IA DR 12's. would of done a better number if i didn't start later in the song like i did. the end had a pause in it for about a sec and it wasnt a consistant note which dropped it more.

Sundown SAX-200.4 - DIYMA.com -----

The sa12s are rated at 600rms but i have seen they can take more. My question is can i safely run two sa12s on the saz1500 at 1 ohm in a daily setup?

Did a couple of search's and did not find anything close to what I wanted to know. Bassically is the regular anodized aluminum trim plate that sits on top of the map removable without doing anyharm to the amp itself, by removing the 2 SHCS located on either end. Reason why I am asking is I wanted to make a custom plate for mine. Thanks in advance for any help. Toolmaker

$200 shipped in Continental 48 for the SAX-125.2 Paypal me at [email protected] to order OR contact your favorite Sundown Audio dealer. AK and HI contact for shipping rates. FOR USA ONLY. ----- SPECIFICATIONS: o 2/1 Channel Bridgeable Class-AB Amplifier o MOSFET PWM Power Supply o Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load o 12dB Octave Electronic Crossover Slope o Variable Subsonic Filter o High Pass Filter Variable with x 10 Range Selectable Switch o Low Pass Filter Variable with x 10 Range Selectable Switch o HPF/FULL/LPF Selectable Switch o Variable Bass Boost C…

Hooked up the 1500D today after it has been sitting for about 2 months and now it keeps blowing all the car's fuses. Putting it in a late 90's Tahoe which originally had a 1,000watt amp hooked up that ran without any problems. Now after hooking the 1500D we've already been through 2 fuses so far and are unsure on how to fix it. All help is appreciated and thanks in advance.

Sorry guys - backed up again. I am going to let everyone in on why that is : 1) My e-mail volume in 2009 *so far* is two times higher than what I got in 2008 all year long. 2) I have been in the process of buying a new home for several weeks now, this takes up alot of time. 3) As many of you know I have a son - he is now 8 months old - so I can't do much e-mail at home these days. 4) Flu season came through... I got sick after MECA finals, that took me out of work completely for a day and slowed me down for a few more. 5) We are busier than ever - and I do alot of other things besides e-mails. Lots of new things in development... uses up alot of my attention and time. All…

can i order just a bass knob for an saz 1500?

So an interesting project came my way... a client asked me to try out some of the NeoPro speakers for Guitar purposes... which I have had a few folks try them for bass guitar and like them but not regular electric guitar. Client comes back to me stating the NeoPro drivers are entirely too clean and then lends me an old vintage speaker that he considers the "driver to have" for this application -- which is tube amplifier electric guitar. So I analyzed it a bit... and came up with this : * Ribbed, thin paper cone with very small dust cap * Actual paper surround - one piece with the cone * Low excursion spider with completely un-vented frame * Un-vented motor Many of the…

Hey guys I thought i'd give you guys a headup for an awesome show and i'll be bringing my sundown setup with me. Import Face-Off USACi 2X event with Car Show @ 10:00am 8-31-2008 Kansas City International Raceway 8201 S. Noland Rd. Kansas City, MO 64138 Its got the best of all worlds spl/drag racing/ufc style events/car show/bikini contests

When will the Sundown Nightshade v.2 be in ssa's store?

I can either get a second SAZ-2000 or a single SAZ-3500. I am leaning more towards getting the second SAZ-2000 so I can have more power. But I like the thought of having a single powerful amp. But on another note, I am VERY impressed with the 2000, it does more then rated power all day without getting more then luke warm. my SAX-100.4 gets warmer then the 2000 does. These will be powering two RE MT 18"s