Sundown Audio

I was wondering if going from a Us xt2000 to the sundown 1200 would be worth the change. I found a sundown 1200 but would it be a big difference from the Us I already have installed. I want to upgrade to the Sundown 1500 but I am gonna hold off little longer on that. My sub is a Loaded Fi BL 15 in 4 cuft ported box tuned to 32hz. Thanks Mitchell Fuller

anybody know how much rms they can handle maxxxx..............

yo guys. im still patiently waiting on my 2000d to come out of preorder but till then im tryin to get everything else. the memphis mojos that i want arent in stock now. so my question is, how do the 12'' ssa icon compare to the mojos?? and how much RMS do they push? is the 2000d sufficient to power 2 of them? D1 or D2? their in the same price range. so im wondering if should try them out instead. please give your opinions thanks

I recently just purchased a sae-1200. I was wondering for future reference on a bigger subwoofer than I have. Would I be able to strap 2 of the sae-1200's without having to purchase a bigger amp? Thanks, Dover.

Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly. ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur. Regular MSRP will be $239 dollars - right at our low 200s target Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order! Paypal me at [email protected] to pre-order. $175 shipped for ONE $330 shipped for TWO $620 shipped for FOUR Ask about more than that. Two of them in my Jeep has done up to 149.7 dB in …

Still a youngin ....

Anyone waiting on e-mail replies I am a bit behind Be patient! Thanks,

$200 shipped in Continental 48 for the SAX-125.2 Paypal me at [email protected] to order OR contact your favorite Sundown Audio dealer. AK and HI contact for shipping rates. FOR USA ONLY. ----- SPECIFICATIONS: o 2/1 Channel Bridgeable Class-AB Amplifier o MOSFET PWM Power Supply o Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load o 12dB Octave Electronic Crossover Slope o Variable Subsonic Filter o High Pass Filter Variable with x 10 Range Selectable Switch o Low Pass Filter Variable with x 10 Range Selectable Switch o HPF/FULL/LPF Selectable Switch o Variable Bass Boost C…

Congrats on your dB Drag ssnw win today with a 154.1 from ONE SUB. One NightShade 15" powered by a pair of saz-3500s on 12volts. I can't wait to see what you do with more cone area.

hey jacob, i think you need a lineup to show what sundown has. you have a lot of equipment available and people might not know what all you are offering. i just put down the ones i knew of and the ones i think. maybe you want to sticky it? its just an idea subs: sa Z nightshade monster big boy nsx??? amps: sax 50.4 sax 125.2 sax 100.4 saz 1000d sae 1200d saz 1500d saz 2000d saz 3500d saz 4500d

been out of car audio for about 2 months now, but the rest of the year is looking promising... i have everything i need for a complete system just wanting to recone the ns 12's i have to 15s and i have been going back and forth with pete about a rear loading horn for some time now but cant make my desicion... simple question is that what would the advantages and disadvantages of either set up.... power is 2 D2 ns, 2 1500ds @ 2 ohms strapped, 2 dekas 9a31s, and a ohio gen 225/160 HO that has not been dropped in yet... previous systems were 1 15 fully loaded btl in a chambered t line.... which was the loudest set up to date, and 2 ns 12s in 5 cubes @ 35 (which was way too…

So, I got my second 1000D in today. I took it straight to the truck. Hooked it up, I had them ran strapped at 2 ohm. The woofers are D2's, which were ran in parallel in the box then ran in series out side the box, bringing the total to 2 ohm. I only use the left side of the speaker connectors next to the 8awg. It worked fine, sounded good, was loud and voltage was fine. I THEN, tried to re-wire the subs. I wired them in series in the box, so each woofer went up to 4ohm, I then ran each one to the amps. I thought that it would end up bringing the ohm load to 2 ohm, so each amp would see 1ohm. When ran like this, they weren't as loud and voltage DROPPED. Horribly I wired …

SAE-1200 FTW!!!!

Hey I was wondering if I was giving my speakers the most power I could give them. See I have the Sundown SAE-1200D installed and I have a Autotek Mean Machine 100.4 also installed. The sundown has a 150 amp rating and the autotek has a 70 amp rating. My power wire is 0 GA but I still have my old 100amp ANL fuse on the line from when I had 4 ga power wire...the ANL fuse hasnt blown for the 2 weeks Ive been playing my system and I usually have it close to or it not at full tilt. Shouldnt those two amps have blown that 100Amp ANL fuse if it was playing rated RMS???? The autotek is 100 watts x 4 and you all know what the 1200 does....

how long do you have to break in nightshades befor you can play em loud

hallo im using alpine 9855R with sundown saz1500 on dual genesis audiophile 30.01. my problem is when i connect rca to the regular INPUT connection even on full gain the subs almost not move but when i connect rca to the BR connection the subs working great but i dont have control on gain etc.... what can be the problem?

I have a freind that claims to be a Team Sundown member who says he can get a SAZ-10000d. I told him I've been reading the forums and the newest amp your working on is the SAZ-4500d and he must be confussed. He was drunk at the time and wouldn't listen to me. So my question is, are you really working on a SAZ-10000d or is he just a drunk idiot?

Quick help needed please... I have a 2.35 cubic foot enclosure for 4 E8's powered by an SAE 1200. I'm going to use a 6" port, can't make my mind what to tune it to 30-35 hz. Is a 6" port, 28.26 sqare inches to much port area for this combo? I see people using a single 6" port for up to 4 cubes. I'm a little worried about the subs unloading and damaging the suspension.

im thinking about being done with the idea of twelves all together what do you guys think one sundown 18 or two 15's can they handle two 3000ds strapped daily at 2 ohms. i wanna move some air they will be going in 88 delta, but i have a 92 honda accord also which i have thought about using i am wanting to get in to spl wich would be a good starting point.

Ordered my other SAZ-1000D today Will probably be here Wednesday, so I will install it Wednesday. The question still remains, strapped at 2ohm? Or separate operation at 1ohm each. I understand strapping is less efficient, but that's ok. How about some options on sound, output, and heat build up.

http://www.db-r.com/sell/store2/index.php?...;cPath=65_67_69 SAX-50.4 - $160.65 - $174.25 SAX-100.4 - $238.00 - $276.25 SAX-100.2 - $169.15 SAX-125.2 - $169.15 SAE-1000D - $233.75 SAZ-1000D - $233.75 SAE-1200D - $246.50 SAZ-1500D - $322.15 - $339.15 SAZ-3000D - $595.00 - $641.75 This is a BIG sale. Prices are good until 06/15/2009, HOWEVER, quantities are limited, so get them while you can! Get them while you can

What kinda numbers do you think I can achieve with this setup? Car is an 06 Scion xB, currently I have stock battery up front, and a Kinetic 800 in back. Big 3 is done and dynamat everywhere so far but roof. Only cause I ran out of money. Box is 1.44 tuned to 38 hz sub up port to passenger side. Port is a single 4" aeroport. I made box so there is roughly 8 and a half inches to side of truck. 3/4" mdf except top plate top plate is two layers of 3/4. Box has lots of bracing. Just a note this is a version one of the nightshade. And is there anything I can try to gain a little bit more db's. Also, if it helps any head unit is a Pioneer Premier. Any help is greatly…

This might be a dumb question but I'll go ahead and ask. I was tuning my 1200d for the first itme this morning and before I could reach the 35v suggested voltage with the DMM, the amp started making a faint popping, buzzing sound. My target volume is 21/35 and the noise appeared at about 13/35. The noise went away as I turned it down. I'm running 1/0 gauge from front to db block and a run of 4 ga for 5' to the amp. BTW, no db gain was used and the remote gain was at 1/2 with susbsonic set a 28hz a x-over set at 1/2 as stated in manual. Anyone experience this before?

just thought people might want to fallow this one? http://audioforum.termpro.com/topic/28/1200.html

Well all I have to say is thanks Jacob. I just got 2 1500d's, let me tell you they are strong amps!!! I can't wait to get the other 6. I did manage to do some testing... I will just say this 2 1500's are louder than one Stetsom 7kd in my vehicle, on 12volts.