Sundown Audio

was just wondering what kind of numbers you all are seeing out of them. i know i already read the amp testing thread was just wondering from other people who are using them as well.

Vids are off my cell phone. name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" wmode="transparent" width="650" height="535"…

So... who would do it ? Lets say if this amp was a full 1 dB louder than even the SAZ-3500D on 12v @ 1 ohm... and the 3500D was already 1 dB louder than the 3000D. Maybe it's already been in testing for a while So we are talking ~2dB gain from the SAZ-3000D on this bad boy. Pre-Order price would be around $1200 or so shipped. Lets see a show of hands.

Thanks to Jacob and Sundown, the prize for the KFC wing eating contest at the June 13th Db Drag, Competition Only, and IASCA show in Andrews will be a Sundown 1500d! There will be a $20 entry fee. First one to finish WINS! Registration will be on a first come first served basis. There will only be 10 entries available. Show will start around 3:00 pm and registration for the wing contest will begin around 4:00 with the contest starting around 7:00 pm.

Corey Mitchell 1 Sundown 1500D and one 12" Nightshade @ 34Hz 1st place Drive-By 1 with a 118.6 (40 amps of fusing) 1st place in Street 1 with a 142.9 (40 amps of fusing) Jeremy McCord 2 Sundown 3000Ds and three 15" Nightshades @ 43Hz 1st place in Drive-By 4 with a 129.7 (320 amps of fusing) 1st place in MOD 3 with a 151.4 (145 amps of fusing) Drive-By Best of Show Josh Newton 4 Sundown 1500Ds and 8 15" MA Audio XLs @ 31Hz 1st place in MOD 4 with a 155.1 (240 amps of fusing) 1st place in Drive-By 5 with a 127.0 (no fusing) SPL Best of Show Derek Jackson 2 Sundown 1500Ds and two 12" Nightshades @ 50Hz 1st place in Street 2 with a 149.8 (60 amps of fusing) 2nd place in Drive…

i have a d1 nightshade 15 and i was wonder if i could use one sae-1200d to each coil? if so would i wire each coil at 1 ohm?

thinking about ordering the sundown 2000d, but is it free shipping?

Listen 1st of all I posted on here a few days ago about not getting my invoice. I had to go out of town for a job and could not post. This is the 1st chance I've had. Just let me start by saying some of you are so out of line it's unbelievable. I'm a paying customer who spent alot on my 2 amps. All I wanted was my invoice that DB-r fucked up and didn't send. The reason I posted here is because where else do I go when DB-r never get's around to sending the damn invoice? Give me a break I have done nothing wrong at all except ask for the invoice and it's not my problem if Db-r can't seem to remember our e-mail communications in which they told me they would send the invoic…

Dang i have never had an amp so powerful. i got home from iraq and strapped my two sundown 3000ds together.i used 4 gauge on the negatives and and 8 gauge going to the speakers. got rid of the mtx 12's and put two dd 3512's my trunk two i already had(four all together now). the new ones never had a chance they both went out gotta send em back they didn't burn up just got stuck. its hard not to play em loud when that's all your amps know is loud. i couldn't even put everything on the meter.something happened to my slave amp have to send it back. when i get everything back i will just use one amp to break everything in. the two sundowns are more efficient than my one stets…

I know most amps have to battle heat to stay running as my last amp use to operate well into the 150 degree range on a normal basis but I just have one question. Wheres the heat at on this SAE-1200D???? Ive been bumping hard for 3-4 hours straight and not even a sweat. I can touch it at the end of the night and the heatsinks drain the heat out of my body. How is this thing suppose to be a normal amp????

which amp would be the best match for a JL 13W7? SAZ-1000? I can run it at .75 ohm or 3 ohm. thanks.

I use a ~$300 DMM to measure our coils here at the shop... why ? Well I'll show you... * Our Dual-1 coil on a cheap meter. * On our meter - factory spec is 0.84 ohms +/- 12%. This thing is dead on. * Our Dual-2 on a cheap meter. * On our meter - factory spec 1.85 +/- 12%. Again... 12% variance allows up to 2.07 and the meter only reads to the tenths place so it is dead on. So. Keep that in mind when reading your coils on a cheaper meter.

is their any in stock???

I'm looking for a jumping off point for a box size. If someone would be able to help me out that would be great. It's going into a S10 extended cab.

I've made repeated efforts to get an invoice for one of the amps I bought from DB-r over the last 6 months. I've posted here and sent e-mails to db-r. Neither of you have lifted a finger to help me. I've come to the conclusion that Sundown support is all hype because when I needed some help I couldn't get any at all. The next time I spend a grand on audio equipment it will be someplace else.

I am so impressed with my SAZ-1000D's output power that I am ordering another Friday or Monday. But here is where I am stuck. Should I run them strapped at 2 ohm, or one amp on one woofer at 1ohm each. I am just wondering the benefits of running strapped, or if their are none why shouldn't I? P.S. I got 1032.53 watts with rise to 1.8ohm and drop from 13.5v to 12.9v.

It looks like I'll finally be getting these bad boys in the car soon. Box is built, kicks are built, just need to mount the 8's in the doors and dress everything up. Soon I'll be installing the actual components and setting everything up. I've never done a ported enclosure before so I'd like to get some advise on the subsonic filter from you guys. This install is with the 2 copper coil 15" nightshades which have a Fs of: Fs: 30.9 Hz settling to around 28 Hz after break in. I have the box tuned to approx 29.5 to 30hz. What should I set my subsonic filter at so I don't unload these things? They will be powered by one SAZ-3000D at 1ohm. Thanks again for all your help.…

i will be running 6-eminence alpha-6c's(4ohms,100rms) and 2-boss audio tweeters tw12(4ohms,50-75rms) and im confused as to which 4-channel amp to get considering the 50.4 looks as if it only has the hpf going up tp 3,000hz on two channels only and wondering if im reading it wrong. is the 100.4 the same as well or is their a special way to use the 50.4 in my application. two channels will have two eminence's on them each and the other two channels will have one eminence and boss tweeter each. if i get the 50.4, channel 1&2 will be dedicated to eminence and boss tweeter, while im confused on how to run the two eminence setup on channel 3&4 with the hpf only going to…

Just a taste. Building this truck to compete in IASCA SQC. Gear list: Eclipse CD7200MKII Sundown 100.4 Sundown 125.2 Sundown 1000D Hybrid Audio Clarus comps. 2- 12" Alumapro Alchemy Processing is still undecided but leaning towards a Zapco DSP6 or Audison BitOne. Next upgrades will be to a Batcap 2000 under the hood and a Batcap Power Pack somewhere near the amps. 2004 Chevy extended cab.

10" diameter slugs, triple stacked. The pole flare is a bit shallower and narrower than I wanted... but we'll see how it does with testing. I have the coils, spiders, cones, etc waiting for it here! Picture is from the factory, it's on the way to me soon Not showing the other side of the motor yet, sorry guys! And before anyone asks... no ETA on production, I still haven't tested this prototype yet!

Probably a noob question but can you strap a 3000d to a 3500d?

i took a 20 hour trip friday/sat and about 3 hours in the amp started cutting out on channel 3 ONLY but i noticed the other channels sounded a bit distorted as well... i get to ohio(from louisiana) and trouble shoot it, checked everything, opened the board up NOTHING visual.. put it vack in and played it for about 30 min and it still occures.. so i go to lower the gains a bit just enought to keep it from getting hot and cutting out/sounding bad.. i touch the gain(pot) and it completely shorts channel 3 out. i mean completely cuts off when i touch the pot to the chassie of hte amp... figuring its got a short somewhere between hte gain and the output i ground the amp frame …

Hi, I just ordered a 50x4 and will be using this to drive my mids and tweets separately. It looks like to me the best way to do this is: - connect mids to 1/2, tweets to 3/4 - for channels 1/2, set it to HPF @3000 or similar - for channels 34, set it to LPF @3000 Then, for 1/2, set the subsonic filter the the crossover point with my sub. Is this a legit use of the subsonic filter? What is the x-over slope on the subsonic? My other amp is a 125.2 bridged driving a soundsplinter rli-8. Cheers!

they came in perferct condition Thanks to mark for great service ...

Tarheels Auto Sound Challenge # 3 Sunday May 17th all classes spl/sq/dbspl registration starts at 9:00 AM and closes at 1:00PM. This is a MECA 2x point event . We would also like to welcome NSCSPL to the event as they will also be hosting a show as well. That's right we will be holding TWO shows at once. Hope to see you there.